sx1302 初始化日志

sx1302 初始化日志

sync_word=0x12,freq=495000000hz,sf7,bw=250k,cr4/5,low_speed=0,tx_power=5dB.

SX1302: chip version is 0x10 (v1.0)
INFO: reset sx1250 (RADIO_A) done
Setting rf_chain_0 in sx1250 mode
tick=1000,heap=16720.
INFO: reset sx1250 (RADIO_B) done
Setting rf_chain_1 in sx1250 mode
Select Radio B clock
Calibrating sx1250 radios
INFO: reset sx1250 (RADIO_A) done
Setting rf_chain_0 in sx1250 mode
tick=2000,heap=16720.
INFO: reset sx1250 (RADIO_B) done
Setting rf_chain_1 in sx1250 mode
Select Radio B clock
LoRa multi-SF radio select: 0x00
LoRa service radio select: 0x01
LoRa service radio 0
INFO: LoRa multi-SF correlator SF enable mask: 0xFF
INFO: LoRa multi-SF channel enable mask: 0x00
Configuring 8 full-SF modems
Freq2TimeDrift MultiSF: Mantissa = 2408 (0x09, 0x68), Exponent = 3 (0x03)
INFO: LoRa Service modem low speed 0.
INFO: LoRa Service modem: configuring preamble size to 8 symbols
Freq2TimeDrift SingleSF: Mantissa = 2408 (0x09, 0x68), Exponent = 2 (0x02)
INFO: configuring LoRa (Multi-SF) SF5->SF6 with syncword PRIVATE (0x12)
INFO: configuring LoRa (Multi-SF) SF7->SF12 with syncword PUBLIC (0x34)
INFO: configuring LoRa (Service) syncword=0x12.

Loading AGC fw for sx1250
AGC fw loaded
AGC FW VERSION: 10
AGC: Radio A config done
AGC: Radio B config done
AGC: config of analog gain min/max done
AGC: config of analog threshold done
AGC: config of decimator atten min/max done
AGC: config of decimator threshold done
AGC: config of channel atten min/max done
AGC: config of channel atten threshold done
AGC: config of sx1250 PA optimal settings done
AGC: config of PA start delay done
AGC: LBT is disabled
AGC: started

Loading ARB fw
ARB fw loaded
ARB FW VERSION: 2
ARB: Debug stats enabled for SF7
ARB: dual demodulation disabled for all SF
ARB: started
SX1302: chip version is 0x10 (v1.0)