OpenResty Redis操作二次封装

在web+lua+openresty开发中会大量操作redis，项目中的代码会重复创建连接-->数据操作-->关闭连接（或放到连接池）这个完整的链路调用完毕，甚至还要考虑不同的 return 情况做不同处理，就很快发现代码中有大量的重复代码。

因此推荐一个二次封装的类库。

1、编写redis_iresty.lua
redis_iresty.lua放在D:\dev\openresty-1.21.4.1\lualib\resty目录下

vim openresty/lualib/resty/redis_iresty.lua

local redis_c = require "resty.redis"

local ok, new_tab = pcall(require, "table.new")
if not ok or type(new_tab) ~= "function" then
    new_tab = function (narr, nrec) return {} end
end

local _M = new_tab(0, 155)
_M._VERSION = '0.01'

local commands = {
    "append",            "auth",              "bgrewriteaof",
    "bgsave",            "bitcount",          "bitop",
    "blpop",             "brpop",
    "brpoplpush",        "client",            "config",
    "dbsize",
    "debug",             "decr",              "decrby",
    "del",               "discard",           "dump",
    "echo",
    "eval",              "exec",              "exists",
    "expire",            "expireat",          "flushall",
    "flushdb",           "get",               "getbit",
    "getrange",          "getset",            "hdel",
    "hexists",           "hget",              "hgetall",
    "hincrby",           "hincrbyfloat",      "hkeys",
    "hlen",
    "hmget",              "hmset",      "hscan",
    "hset",
    "hsetnx",            "hvals",             "incr",
    "incrby",            "incrbyfloat",       "info",
    "keys",
    "lastsave",          "lindex",            "linsert",
    "llen",              "lpop",              "lpush",
    "lpushx",            "lrange",            "lrem",
    "lset",              "ltrim",             "mget",
    "migrate",
    "monitor",           "move",              "mset",
    "msetnx",            "multi",             "object",
    "persist",           "pexpire",           "pexpireat",
    "ping",              "psetex",            "psubscribe",
    "pttl",
    "publish",      --[[ "punsubscribe", ]]   "pubsub",
    "quit",
    "randomkey",         "rename",            "renamenx",
    "restore",
    "rpop",              "rpoplpush",         "rpush",
    "rpushx",            "sadd",              "save",
    "scan",              "scard",             "script",
    "sdiff",             "sdiffstore",
    "select",            "set",               "setbit",
    "setex",             "setnx",             "setrange",
    "shutdown",          "sinter",            "sinterstore",
    "sismember",         "slaveof",           "slowlog",
    "smembers",          "smove",             "sort",
    "spop",              "srandmember",       "srem",
    "sscan",
    "strlen",       --[[ "subscribe",  ]]     "sunion",
    "sunionstore",       "sync",              "time",
    "ttl",
    "type",         --[[ "unsubscribe", ]]    "unwatch",
    "watch",             "zadd",              "zcard",
    "zcount",            "zincrby",           "zinterstore",
    "zrange",            "zrangebyscore",     "zrank",
    "zrem",              "zremrangebyrank",   "zremrangebyscore",
    "zrevrange",         "zrevrangebyscore",  "zrevrank",
    "zscan",
    "zscore",            "zunionstore",       "evalsha"
}

local mt = { __index = _M }

local function is_redis_null( res )
    if type(res) == "table" then
        for k,v in pairs(res) do
            if v ~= ngx.null then
                return false
            end
        end
        return true
    elseif res == ngx.null then
        return true
    elseif res == nil then
        return true
    end

    return false
end

function _M.close_redis(self, redis)  
    if not redis then  
        return  
    end  
    --释放连接(连接池实现)
    local pool_max_idle_time = self.pool_max_idle_time --最大空闲时间 毫秒  
    local pool_size = self.pool_size --连接池大小  
    
    local ok, err = redis:set_keepalive(pool_max_idle_time, pool_size)  
    if not ok then  
        ngx.say("set keepalive error : ", err)  
    end  
end  

-- change connect address as you need
function _M.connect_mod( self, redis )
    redis:set_timeout(self.timeout)
        
    local ok, err = redis:connect(self.ip, self.port)
    if not ok then  
        ngx.say("connect to redis error : ", err)  
        return self:close_redis(redis)  
    end
    
    if self.password then ----密码认证
        local count, err = redis:get_reused_times()
        if 0 == count then ----新建连接，需要认证密码
            ok, err = redis:auth(self.password)
            if not ok then
                ngx.say("failed to auth: ", err)
                return
            end
        elseif err then  ----从连接池中获取连接，无需再次认证密码
            ngx.say("failed to get reused times: ", err)
            return
        end
    end

    return ok,err;
end

function _M.init_pipeline( self )
    self._reqs = {}
end

function _M.commit_pipeline( self )
    local reqs = self._reqs

    if nil == reqs or 0 == #reqs then
        return {}, "no pipeline"
    else
        self._reqs = nil
    end

    local redis, err = redis_c:new()
    if not redis then
        return nil, err
    end

    local ok, err = self:connect_mod(redis)
    if not ok then
        return {}, err
    end

    redis:init_pipeline()
    for _, vals in ipairs(reqs) do
        local fun = redis[vals[1]]
        table.remove(vals , 1)

        fun(redis, unpack(vals))
    end

    local results, err = redis:commit_pipeline()
    if not results or err then
        return {}, err
    end

    if is_redis_null(results) then
        results = {}
        ngx.log(ngx.WARN, "is null")
    end
    -- table.remove (results , 1)

    --self.set_keepalive_mod(redis)
    self:close_redis(redis)  

    for i,value in ipairs(results) do
        if is_redis_null(value) then
            results[i] = nil
        end
    end

    return results, err
end


local function do_command(self, cmd, ... )
    if self._reqs then
        table.insert(self._reqs, {cmd, ...})
        return
    end

    local redis, err = redis_c:new()
    if not redis then
        return nil, err
    end

    local ok, err = self:connect_mod(redis)
    if not ok or err then
        return nil, err
    end

    redis:select(self.db_index)
    
    local fun = redis[cmd]
    local result, err = fun(redis, ...)
    if not result or err then
        -- ngx.log(ngx.ERR, "pipeline result:", result, " err:", err)
        return nil, err
    end

    if is_redis_null(result) then
        result = nil
    end

    --self.set_keepalive_mod(redis)
    self:close_redis(redis)  

    return result, err
end

for i = 1, #commands do
    local cmd = commands[i]
    _M[cmd] =
            function (self, ...)
                return do_command(self, cmd, ...)
            end
end

function _M.new(self, opts)
    opts = opts or {}
    local timeout = (opts.timeout and opts.timeout * 1000) or 1000
    local db_index= opts.db_index or 0
    local ip = opts.ip or '127.0.0.1'
    local port = opts.port or 6379
    local password = opts.password
    local pool_max_idle_time = opts.pool_max_idle_time or 60000
    local pool_size = opts.pool_size or 100

    return setmetatable({
            timeout = timeout,
            db_index = db_index,
            ip = ip,
            port = port,
            password = password,
            pool_max_idle_time = pool_max_idle_time,
            pool_size = pool_size,
            _reqs = nil }, mt)
end

return _M

2、编写测试脚本
2.1、redis_iresty测试案例

-- redis_iresty测试案例

local redis = require "resty.redis_iresty"

local opts = {
    -- ip = "127.0.0.1",
    ip = "192.168.0.188",
    port = "6379",
    password = "123456",
    db_index = 0
}

local red = redis:new(opts)

local ok, err = red:set("dog", "an animal12!")
if not ok then
    ngx.say("failed to set dog: ", err)
    return
end

ngx.say("set result: ", ok)

 

2.2、redis_iresty管道测试案例

-- redis管道用法

local redis = require "resty.redis_iresty"

local opts = {
    -- ip = "127.0.0.1",
    ip = "192.168.0.188",
    port = "6379",
    password = "123456",
    db_index = 0
}

local red = redis:new(opts)
red:init_pipeline()
red:set("cat", "Marry")
red:set("horse", "Bob")
red:get("cat")
red:get("horse")
local results, err = red:commit_pipeline()
if not results then
    ngx.say("failed to commit the pipelined requests: ", err)
    return
end

for i, res in ipairs(results) do
    ngx.say(res,"<br/>");
end