ApCli MFPC

ApCli MFPC
ApCli MFPR
ApCli MFPSHA256

MT7603.1 Work mode: APCli Driver version: 4.1.2.1
		Interface: ra0 | Type: AP | SSID: MT7603E.1.AP | Channel: 3 BSSID: 94:a4:08:b2:1e:c8 | Mode: B/G/GN mode
		Interface: apcli0 | Type: STA | Status: Connected BSSID: 50:42:89:6E:64:25 | SSID: 1517

channel 选错也无法连接....注意配置环境...

apcli0    Link encap:Ethernet  HWaddr 96:A4:08:02:1E:C8
          inet6 addr: fe80::94a4:8ff:fe02:1ec8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

也没有ip地址

  1)AP端的MFPC置1,MFPR置0,STA端的MFPC置0或1,MFPR置0时,允许STA上线,并回应关联响应报文,PMFStatus字段的值为Inactive;若STA端的MFPC置1,MFPR置1,也允许STA上线,回应关联响应报文,P...