实验 7:OpenDaylight 实验——Python 中的 REST API 调用

一、实验目的

对 Python 调用 OpenDaylight 的 REST API 方法有初步了解。

二、实验任务

本实验需要用另一种方法完成上一个实验相同的功能,即通过 Python 程序调用OpenDaylight 的北向接口下发关于硬超时的流表,实现拓扑内主机在一定时间内的网络通断。实验拓扑如下:

三、实验步骤

1. 实验环境

安装了 Ubuntu 18.04.5 Desktop amd64 的虚拟机

2. 实验过程

(1)生成拓扑

$ sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13 

生成拓扑的方法同之前的实验一致

(2)编写 Python 代码和 JSON 格式的请求内容

$ nano odlnorth.py 
#!/usr/bin/python 
 
import requests from requests.auth 
import HTTPBasicAuth 
 
def http_put(url,jstr):     
      url= url     
      headers = {'Content-Type':'application/json'}     
      resp = requests.put(url,jstr,headers=headers,auth=HTTPBasicAuth('admin', 'admin'))   
      return resp           


if __name__ == "__main__":     
      url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1'            
      with open('hardtimeout.json') as f:         
            jstr = f.read()     
      resp = http_put(url,jstr)     
      print resp.content 

由于是下发流表,因此需要有 http 请求的具体内容,同之前的 Postman 一样,也是以 JSON 格式来表示。
编辑 hardtimeout.json 文件:

$ nano hardtimeout.json 

文件中不包含 http 请求的 url 地址

{     
      "flow": [
         {
             "id": "1",
             "match": {
                 "in-port": "1",
                 "ethernet-match": {
                     "ethernet-type": {
                         "type": "0x0800" 
                    }
                 },
                 "ipv4-destination": "10.0.0.3/32"
             },
             "instructions": {
                 "instruction": [
                     {
                         "order": "0",
                         "apply-actions": {
                             "action": [
                                 {
                                     "order": "0",
                                     "drop-action": {}
                                 }
                             ]
                         }
                     }
                 ]
             },
             "flow-name": "flow1",
             "priority": "65535",
             "hard-timeout": "10",
             "cookie": "2",
             "table_id": "0"
         }
     ]
 } 

(3)运行 Python 代码,完成流表下发

$ python odlnorth.py 

结果验证方法同实验 6。

h1 ping h3 差不多有 10 秒时间是中断的,结果符合预期。

posted @ 2020-10-21 12:38  在云端7  阅读(106)  评论(0编辑  收藏  举报