(转)Loadrunner监控Linux的17个指标

1、Average load:Average number of processes simultaneously in Ready state during the last minute.

  上一分钟同时处于“就绪”状态的平均进程数
2、Collision rate:Collisions per second detected on the Ethernet.
    每秒钟在以太网上检测到的冲突数。
3、Context switches rate:Number of switches between processes or threads, per second
    每秒钟在进程或线程之间的切换次数。
4、CPU utilization:Percent of time that the CPU is utilized
    CPU 的使用时间百分比。
5、Disk Traffic:Rate of disk transfers
    磁盘传输速率。
6、Incoming packets error rate:Errors per second while receiving Ethernet packets
    接收以太网数据包时每秒钟接收到的错误数。
7、Incoming packets rate:Incoming Ethernet packets per second
    每秒钟传入的以太网数据包数。
8、Interrupt rate:Number of device interrupts per second
    每秒内的设备中断数。
9、Outgoing packets errors rate:Errors per second while sending Ethernet packets
    发送以太网数据包时每秒钟发送的错误数。
10、Outgoing packets rate:Outgoing Ethernet packets per second
    每秒钟传出的以太网数据包数。
11、Page-in rate:Number of pages read to physical memory, per second
    指标表明的是每秒交换到物理内存中的页面数。
12、Page-out rate:Number of pages written to pagefile(s) and removed from physical memory, per second
    表示每秒从物理内存中移出或者写入到页面数。
13、Paging rate:Number of pages read to physical memory or written to pagefile(s), per second
    每秒钟读入物理内存或写入页面文件中的页数。
14、Swap-in rate:Number of processes being swapped
    每秒交换到内存的进程数。
15、Swap-out rate:Number of processes being swapped
    每秒从内存交换出来的进程数。
16、System mode CPU utilization:Percent of time that the CPU is utilized in system mode 
    在系统模式下使用 CPU 的时间百分比。
17、User mode CPU utilization:Percent of time CPU is utilized in user mode
    在用户模式下使用 CPU 的时间百分比。
posted @ 2016-06-08 08:50  海上浪子  阅读(251)  评论(0编辑  收藏  举报