ZooKeeper（三）：请求处理链路的创建过程解析

　　我们知道，zk就是一个个处理链组成的。

　　但是，这些处理链是在什么创建的呢？

 

　　ZooKeeper 中有三种角色的服务节点存在: Leader, Follower, Observer . 

　　而每个服务节点的承担的任务是不一样的，所以处理任务的逻辑是不一样的。而在ZK中，则是巧妙的通过责任链模式将各自节点的处理能力建立起来的。

　　而这个创建时机是在什么时候呢？服务一启动的时候？还是每个请求进来的时候？

　　其实ZK服务节点的处理链路是在角色被确定下来了之后，才创建的！我们一起看一下过程！

 

一、选举线程会一直工作

　　QuorumPeer 线程会一直循环检查当前节点的状态，当当前节点的决定确认之后，其处理链自然就定了！

　　所以，我们需要先来看一下他是如何处理当前角色的先！

    // org.apache.zookeeper.server.quorum.QuorumPeer#run
    @Override
    public void run() {
        updateThreadName();

        // 注册jmx 度量信息
        LOG.debug("Starting quorum peer");
        try {
            jmxQuorumBean = new QuorumBean(this);
            MBeanRegistry.getInstance().register(jmxQuorumBean, null);
            for (QuorumServer s : getView().values()) {
                ZKMBeanInfo p;
                if (getId() == s.id) {
                    p = jmxLocalPeerBean = new LocalPeerBean(this);
                    try {
                        MBeanRegistry.getInstance().register(p, jmxQuorumBean);
                    } catch (Exception e) {
                        LOG.warn("Failed to register with JMX", e);
                        jmxLocalPeerBean = null;
                    }
                } else {
                    RemotePeerBean rBean = new RemotePeerBean(this, s);
                    try {
                        MBeanRegistry.getInstance().register(rBean, jmxQuorumBean);
                        jmxRemotePeerBean.put(s.id, rBean);
                    } catch (Exception e) {
                        LOG.warn("Failed to register with JMX", e);
                    }
                }
            }
        } catch (Exception e) {
            LOG.warn("Failed to register with JMX", e);
            jmxQuorumBean = null;
        }

        try {
            /*
             * Main loop
             */
             // 死循环，一直检测当前节点的状态，当确认角色后，进行正式工作循环
             // 当状态再次变更时，会抛出相应异常，从而进行重新选举操作
            while (running) {
                switch (getPeerState()) {
                // LOOKING 将触发选举，很关键，但我们后续再来解析这块东西
                case LOOKING:
                    LOG.info("LOOKING");
                    ServerMetrics.getMetrics().LOOKING_COUNT.add(1);

                    if (Boolean.getBoolean("readonlymode.enabled")) {
                        LOG.info("Attempting to start ReadOnlyZooKeeperServer");

                        // Create read-only server but don't start it immediately
                        final ReadOnlyZooKeeperServer roZk = new ReadOnlyZooKeeperServer(logFactory, this, this.zkDb);

                        // Instead of starting roZk immediately, wait some grace
                        // period before we decide we're partitioned.
                        //
                        // Thread is used here because otherwise it would require
                        // changes in each of election strategy classes which is
                        // unnecessary code coupling.
                        Thread roZkMgr = new Thread() {
                            public void run() {
                                try {
                                    // lower-bound grace period to 2 secs
                                    sleep(Math.max(2000, tickTime));
                                    if (ServerState.LOOKING.equals(getPeerState())) {
                                        roZk.startup();
                                    }
                                } catch (InterruptedException e) {
                                    LOG.info("Interrupted while attempting to start ReadOnlyZooKeeperServer, not started");
                                } catch (Exception e) {
                                    LOG.error("FAILED to start ReadOnlyZooKeeperServer", e);
                                }
                            }
                        };
                        try {
                            roZkMgr.start();
                            reconfigFlagClear();
                            if (shuttingDownLE) {
                                shuttingDownLE = false;
                                startLeaderElection();
                            }
                            setCurrentVote(makeLEStrategy().lookForLeader());
                        } catch (Exception e) {
                            LOG.warn("Unexpected exception", e);
                            setPeerState(ServerState.LOOKING);
                        } finally {
                            // If the thread is in the the grace period, interrupt
                            // to come out of waiting.
                            roZkMgr.interrupt();
                            roZk.shutdown();
                        }
                    } else {
                        try {
                            reconfigFlagClear();
                            if (shuttingDownLE) {
                                shuttingDownLE = false;
                                startLeaderElection();
                            }
                            setCurrentVote(makeLEStrategy().lookForLeader());
                        } catch (Exception e) {
                            LOG.warn("Unexpected exception", e);
                            setPeerState(ServerState.LOOKING);
                        }
                    }
                    break;
                // OBSERVING 节点只会接收来自 Leader 的数据
                case OBSERVING:
                    try {
                        LOG.info("OBSERVING");
                        setObserver(makeObserver(logFactory));
                        observer.observeLeader();
                    } catch (Exception e) {
                        LOG.warn("Unexpected exception", e);
                    } finally {
                        observer.shutdown();
                        setObserver(null);
                        updateServerState();

                        // Add delay jitter before we switch to LOOKING
                        // state to reduce the load of ObserverMaster
                        if (isRunning()) {
                            Observer.waitForObserverElectionDelay();
                        }
                    }
                    break;
                // FOLLOWING 节点将参与数据的决策
                case FOLLOWING:
                    try {
                        LOG.info("FOLLOWING");
                        setFollower(makeFollower(logFactory));
                        follower.followLeader();
                    } catch (Exception e) {
                        LOG.warn("Unexpected exception", e);
                    } finally {
                        follower.shutdown();
                        setFollower(null);
                        updateServerState();
                    }
                    break;
                // LEADING 负责数据的写入，以及维护各Follower的数据同步等
                case LEADING:
                    LOG.info("LEADING");
                    try {
                        setLeader(makeLeader(logFactory));
                        leader.lead();
                        setLeader(null);
                    } catch (Exception e) {
                        LOG.warn("Unexpected exception", e);
                    } finally {
                        if (leader != null) {
                            leader.shutdown("Forcing shutdown");
                            setLeader(null);
                        }
                        updateServerState();
                    }
                    break;
                }
            }
        } finally {
            // 最终退出，可能是异常退出，也可能是主动关闭了（running=false）,总之做好记录、清理工作
            LOG.warn("QuorumPeer main thread exited");
            MBeanRegistry instance = MBeanRegistry.getInstance();
            instance.unregister(jmxQuorumBean);
            instance.unregister(jmxLocalPeerBean);

            for (RemotePeerBean remotePeerBean : jmxRemotePeerBean.values()) {
                instance.unregister(remotePeerBean);
            }

            jmxQuorumBean = null;
            jmxLocalPeerBean = null;
            jmxRemotePeerBean = null;
        }
    }

　　总体来说就是，始终会有一个后台线程，一直去检查当前节点的状态，然后根据状态去分派任务。

　　当任务分派下去之后，没有变化就不要返回了，即一直处理自己任务即可。只要不发生异常，它会一直保持下去。

　　总共有四个状态: LOOKING, OBSERVING, FOLLOWING, LEADING, 也字如其义，做各自的工作。

 

二、Follower 的链路创建过程

// 如下: 1. 创建 Follower 实例; 2. 调用 followLeader() 执行业务逻辑;
    case FOLLOWING:
        try {
            LOG.info("FOLLOWING");
            // 先创建 Follower 实例
            setFollower(makeFollower(logFactory));
            // 然后调用 followLeader() 进行处理
            // 当然，它一般会进行循环处理任务，而不是处理完一次后就退出
            follower.followLeader();
        } catch (Exception e) {
            LOG.warn("Unexpected exception", e);
        } finally {
            follower.shutdown();
            setFollower(null);
            updateServerState();
        }
        break;
    // org.apache.zookeeper.server.quorum.QuorumPeer#makeFollower
    protected Follower makeFollower(FileTxnSnapLog logFactory) throws IOException {
        // FollowerZooKeeperServer 是个关键的实例
        // 将上下文传递到 Follower 中，备用
        return new Follower(this, new FollowerZooKeeperServer(logFactory, this, this.zkDb));
    }
    // org.apache.zookeeper.server.quorum.FollowerZooKeeperServer#FollowerZooKeeperServer
    FollowerZooKeeperServer(FileTxnSnapLog logFactory, QuorumPeer self, ZKDatabase zkDb) throws IOException {
        super(logFactory, self.tickTime, self.minSessionTimeout, self.maxSessionTimeout, self.clientPortListenBacklog, zkDb, self);
        // 使用 ConcurrentLinkedQueue 队列进行消息传递
        this.pendingSyncs = new ConcurrentLinkedQueue<Request>();
    }
    
    // 创建好 follower 实例后，就调用其主要方法 followLeader()
    // 这里承担了所有的 follower 的动作指令
    /**
     * the main method called by the follower to follow the leader
     *
     * @throws InterruptedException
     */
    void followLeader() throws InterruptedException {
        self.end_fle = Time.currentElapsedTime();
        long electionTimeTaken = self.end_fle - self.start_fle;
        self.setElectionTimeTaken(electionTimeTaken);
        ServerMetrics.getMetrics().ELECTION_TIME.add(electionTimeTaken);
        LOG.info("FOLLOWING - LEADER ELECTION TOOK - {} {}", electionTimeTaken, QuorumPeer.FLE_TIME_UNIT);
        self.start_fle = 0;
        self.end_fle = 0;
        fzk.registerJMX(new FollowerBean(this, zk), self.jmxLocalPeerBean);

        long connectionTime = 0;
        boolean completedSync = false;

        // 先做一些准备工作
        try {
            self.setZabState(QuorumPeer.ZabState.DISCOVERY);
            QuorumServer leaderServer = findLeader();
            try {
                connectToLeader(leaderServer.addr, leaderServer.hostname);
                connectionTime = System.currentTimeMillis();
                long newEpochZxid = registerWithLeader(Leader.FOLLOWERINFO);
                if (self.isReconfigStateChange()) {
                    throw new Exception("learned about role change");
                }
                //check to see if the leader zxid is lower than ours
                //this should never happen but is just a safety check
                long newEpoch = ZxidUtils.getEpochFromZxid(newEpochZxid);
                if (newEpoch < self.getAcceptedEpoch()) {
                    LOG.error("Proposed leader epoch "
                              + ZxidUtils.zxidToString(newEpochZxid)
                              + " is less than our accepted epoch "
                              + ZxidUtils.zxidToString(self.getAcceptedEpoch()));
                    throw new IOException("Error: Epoch of leader is lower");
                }
                long startTime = Time.currentElapsedTime();
                try {
                    self.setLeaderAddressAndId(leaderServer.addr, leaderServer.getId());
                    self.setZabState(QuorumPeer.ZabState.SYNCHRONIZATION);
                    // 与 Leader 建立同步，即发起 Socket 连接
                    syncWithLeader(newEpochZxid);
                    self.setZabState(QuorumPeer.ZabState.BROADCAST);
                    completedSync = true;
                } finally {
                    long syncTime = Time.currentElapsedTime() - startTime;
                    ServerMetrics.getMetrics().FOLLOWER_SYNC_TIME.add(syncTime);
                }
                // 如果设置了 observeMasterPort() 则开启相应处理线程
                if (self.getObserverMasterPort() > 0) {
                    LOG.info("Starting ObserverMaster");

                    om = new ObserverMaster(self, fzk, self.getObserverMasterPort());
                    om.start();
                } else {
                    om = null;
                }
                // create a reusable packet to reduce gc impact
                QuorumPacket qp = new QuorumPacket();
                // 会在此处一直循环等待 leader 节点的信息，进行任务处理，直到发生异常退出
                while (this.isRunning()) {
                    readPacket(qp);             
                    processPacket(qp);
                }
            } catch (Exception e) {
                LOG.warn("Exception when following the leader", e);
                closeSocket();

                // clear pending revalidations
                pendingRevalidations.clear();
            }
        } finally {
            if (om != null) {
                om.stop();
            }
            zk.unregisterJMX(this);

            if (connectionTime != 0) {
                long connectionDuration = System.currentTimeMillis() - connectionTime;
                LOG.info(
                    "Disconnected from leader (with address: {}). Was connected for {}ms. Sync state: {}",
                    leaderAddr,
                    connectionDuration,
                    completedSync);
                messageTracker.dumpToLog(leaderAddr.toString());
            }
        }
    }

    // org.apache.zookeeper.server.quorum.Learner#syncWithLeader
    /**
     * Finally, synchronize our history with the Leader (if Follower)
     * or the LearnerMaster (if Observer).
     * @param newLeaderZxid
     * @throws IOException
     * @throws InterruptedException
     */
    protected void syncWithLeader(long newLeaderZxid) throws Exception {
        QuorumPacket ack = new QuorumPacket(Leader.ACK, 0, null, null);
        QuorumPacket qp = new QuorumPacket();
        long newEpoch = ZxidUtils.getEpochFromZxid(newLeaderZxid);

        QuorumVerifier newLeaderQV = null;

        // In the DIFF case we don't need to do a snapshot because the transactions will sync on top of any existing snapshot
        // For SNAP and TRUNC the snapshot is needed to save that history
        boolean snapshotNeeded = true;
        boolean syncSnapshot = false;
        readPacket(qp);
        Deque<Long> packetsCommitted = new ArrayDeque<>();
        Deque<PacketInFlight> packetsNotCommitted = new ArrayDeque<>();
        synchronized (zk) {
            if (qp.getType() == Leader.DIFF) {
                LOG.info("Getting a diff from the leader 0x{}", Long.toHexString(qp.getZxid()));
                self.setSyncMode(QuorumPeer.SyncMode.DIFF);
                snapshotNeeded = false;
            } else if (qp.getType() == Leader.SNAP) {
                self.setSyncMode(QuorumPeer.SyncMode.SNAP);
                LOG.info("Getting a snapshot from leader 0x{}", Long.toHexString(qp.getZxid()));
                // The leader is going to dump the database
                // db is clear as part of deserializeSnapshot()
                zk.getZKDatabase().deserializeSnapshot(leaderIs);
                // ZOOKEEPER-2819: overwrite config node content extracted
                // from leader snapshot with local config, to avoid potential
                // inconsistency of config node content during rolling restart.
                if (!QuorumPeerConfig.isReconfigEnabled()) {
                    LOG.debug("Reset config node content from local config after deserialization of snapshot.");
                    zk.getZKDatabase().initConfigInZKDatabase(self.getQuorumVerifier());
                }
                String signature = leaderIs.readString("signature");
                if (!signature.equals("BenWasHere")) {
                    LOG.error("Missing signature. Got {}", signature);
                    throw new IOException("Missing signature");
                }
                zk.getZKDatabase().setlastProcessedZxid(qp.getZxid());

                // immediately persist the latest snapshot when there is txn log gap
                syncSnapshot = true;
            } else if (qp.getType() == Leader.TRUNC) {
                //we need to truncate the log to the lastzxid of the leader
                self.setSyncMode(QuorumPeer.SyncMode.TRUNC);
                LOG.warn("Truncating log to get in sync with the leader 0x{}", Long.toHexString(qp.getZxid()));
                boolean truncated = zk.getZKDatabase().truncateLog(qp.getZxid());
                if (!truncated) {
                    // not able to truncate the log
                    LOG.error("Not able to truncate the log 0x{}", Long.toHexString(qp.getZxid()));
                    System.exit(ExitCode.QUORUM_PACKET_ERROR.getValue());
                }
                zk.getZKDatabase().setlastProcessedZxid(qp.getZxid());

            } else {
                LOG.error("Got unexpected packet from leader: {}, exiting ... ", LearnerHandler.packetToString(qp));
                System.exit(ExitCode.QUORUM_PACKET_ERROR.getValue());

            }
            zk.getZKDatabase().initConfigInZKDatabase(self.getQuorumVerifier());
            zk.createSessionTracker();

            long lastQueued = 0;

            // in Zab V1.0 (ZK 3.4+) we might take a snapshot when we get the NEWLEADER message, but in pre V1.0
            // we take the snapshot on the UPDATE message, since Zab V1.0 also gets the UPDATE (after the NEWLEADER)
            // we need to make sure that we don't take the snapshot twice.
            boolean isPreZAB1_0 = true;
            //If we are not going to take the snapshot be sure the transactions are not applied in memory
            // but written out to the transaction log
            boolean writeToTxnLog = !snapshotNeeded;
            // we are now going to start getting transactions to apply followed by an UPTODATE
            outerLoop:
            while (self.isRunning()) {
                readPacket(qp);
                switch (qp.getType()) {
                case Leader.PROPOSAL:
                    PacketInFlight pif = new PacketInFlight();
                    pif.hdr = new TxnHeader();
                    pif.rec = SerializeUtils.deserializeTxn(qp.getData(), pif.hdr);
                    if (pif.hdr.getZxid() != lastQueued + 1) {
                        LOG.warn(
                            "Got zxid 0x{} expected 0x{}",
                            Long.toHexString(pif.hdr.getZxid()),
                            Long.toHexString(lastQueued + 1));
                    }
                    lastQueued = pif.hdr.getZxid();

                    if (pif.hdr.getType() == OpCode.reconfig) {
                        SetDataTxn setDataTxn = (SetDataTxn) pif.rec;
                        QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));
                        self.setLastSeenQuorumVerifier(qv, true);
                    }

                    packetsNotCommitted.add(pif);
                    break;
                case Leader.COMMIT:
                case Leader.COMMITANDACTIVATE:
                    pif = packetsNotCommitted.peekFirst();
                    if (pif.hdr.getZxid() == qp.getZxid() && qp.getType() == Leader.COMMITANDACTIVATE) {
                        QuorumVerifier qv = self.configFromString(new String(((SetDataTxn) pif.rec).getData()));
                        boolean majorChange = self.processReconfig(
                            qv,
                            ByteBuffer.wrap(qp.getData()).getLong(), qp.getZxid(),
                            true);
                        if (majorChange) {
                            throw new Exception("changes proposed in reconfig");
                        }
                    }
                    if (!writeToTxnLog) {
                        if (pif.hdr.getZxid() != qp.getZxid()) {
                            LOG.warn(
                                "Committing 0x{}, but next proposal is 0x{}",
                                Long.toHexString(qp.getZxid()),
                                Long.toHexString(pif.hdr.getZxid()));
                        } else {
                            zk.processTxn(pif.hdr, pif.rec);
                            packetsNotCommitted.remove();
                        }
                    } else {
                        packetsCommitted.add(qp.getZxid());
                    }
                    break;
                case Leader.INFORM:
                case Leader.INFORMANDACTIVATE:
                    PacketInFlight packet = new PacketInFlight();
                    packet.hdr = new TxnHeader();

                    if (qp.getType() == Leader.INFORMANDACTIVATE) {
                        ByteBuffer buffer = ByteBuffer.wrap(qp.getData());
                        long suggestedLeaderId = buffer.getLong();
                        byte[] remainingdata = new byte[buffer.remaining()];
                        buffer.get(remainingdata);
                        packet.rec = SerializeUtils.deserializeTxn(remainingdata, packet.hdr);
                        QuorumVerifier qv = self.configFromString(new String(((SetDataTxn) packet.rec).getData()));
                        boolean majorChange = self.processReconfig(qv, suggestedLeaderId, qp.getZxid(), true);
                        if (majorChange) {
                            throw new Exception("changes proposed in reconfig");
                        }
                    } else {
                        packet.rec = SerializeUtils.deserializeTxn(qp.getData(), packet.hdr);
                        // Log warning message if txn comes out-of-order
                        if (packet.hdr.getZxid() != lastQueued + 1) {
                            LOG.warn(
                                "Got zxid 0x{} expected 0x{}",
                                Long.toHexString(packet.hdr.getZxid()),
                                Long.toHexString(lastQueued + 1));
                        }
                        lastQueued = packet.hdr.getZxid();
                    }
                    if (!writeToTxnLog) {
                        // Apply to db directly if we haven't taken the snapshot
                        zk.processTxn(packet.hdr, packet.rec);
                    } else {
                        packetsNotCommitted.add(packet);
                        packetsCommitted.add(qp.getZxid());
                    }

                    break;
                // 无需更新数据时，直接退出 while
                case Leader.UPTODATE:
                    LOG.info("Learner received UPTODATE message");
                    if (newLeaderQV != null) {
                        boolean majorChange = self.processReconfig(newLeaderQV, null, null, true);
                        if (majorChange) {
                            throw new Exception("changes proposed in reconfig");
                        }
                    }
                    if (isPreZAB1_0) {
                        zk.takeSnapshot(syncSnapshot);
                        self.setCurrentEpoch(newEpoch);
                    }
                    self.setZooKeeperServer(zk);
                    self.adminServer.setZooKeeperServer(zk);
                    break outerLoop;
                case Leader.NEWLEADER: // Getting NEWLEADER here instead of in discovery
                    // means this is Zab 1.0
                    LOG.info("Learner received NEWLEADER message");
                    if (qp.getData() != null && qp.getData().length > 1) {
                        try {
                            QuorumVerifier qv = self.configFromString(new String(qp.getData()));
                            self.setLastSeenQuorumVerifier(qv, true);
                            newLeaderQV = qv;
                        } catch (Exception e) {
                            e.printStackTrace();
                        }
                    }

                    if (snapshotNeeded) {
                        zk.takeSnapshot(syncSnapshot);
                    }

                    self.setCurrentEpoch(newEpoch);
                    writeToTxnLog = true; //Anything after this needs to go to the transaction log, not applied directly in memory
                    isPreZAB1_0 = false;
                    writePacket(new QuorumPacket(Leader.ACK, newLeaderZxid, null, null), true);
                    break;
                }
            }
        }
        ack.setZxid(ZxidUtils.makeZxid(newEpoch, 0));
        writePacket(ack, true);
        sock.setSoTimeout(self.tickTime * self.syncLimit);
        self.setSyncMode(QuorumPeer.SyncMode.NONE);
        // 将 zk 拉起来
        zk.startup();
        /*
         * Update the election vote here to ensure that all members of the
         * ensemble report the same vote to new servers that start up and
         * send leader election notifications to the ensemble.
         *
         * @see https://issues.apache.org/jira/browse/ZOOKEEPER-1732
         */
        self.updateElectionVote(newEpoch);

        // We need to log the stuff that came in between the snapshot and the uptodate
        if (zk instanceof FollowerZooKeeperServer) {
            FollowerZooKeeperServer fzk = (FollowerZooKeeperServer) zk;
            for (PacketInFlight p : packetsNotCommitted) {
                fzk.logRequest(p.hdr, p.rec);
            }
            for (Long zxid : packetsCommitted) {
                fzk.commit(zxid);
            }
        } else if (zk instanceof ObserverZooKeeperServer) {
            // Similar to follower, we need to log requests between the snapshot
            // and UPTODATE
            ObserverZooKeeperServer ozk = (ObserverZooKeeperServer) zk;
            for (PacketInFlight p : packetsNotCommitted) {
                Long zxid = packetsCommitted.peekFirst();
                if (p.hdr.getZxid() != zxid) {
                    // log warning message if there is no matching commit
                    // old leader send outstanding proposal to observer
                    LOG.warn(
                        "Committing 0x{}, but next proposal is 0x{}",
                        Long.toHexString(zxid),
                        Long.toHexString(p.hdr.getZxid()));
                    continue;
                }
                packetsCommitted.remove();
                Request request = new Request(null, p.hdr.getClientId(), p.hdr.getCxid(), p.hdr.getType(), null, null);
                request.setTxn(p.rec);
                request.setHdr(p.hdr);
                ozk.commitRequest(request);
            }
        } else {
            // New server type need to handle in-flight packets
            throw new UnsupportedOperationException("Unknown server type");
        }
    }
    // org.apache.zookeeper.server.ZooKeeperServer#startup
    public synchronized void startup() {
        if (sessionTracker == null) {
            createSessionTracker();
        }
        startSessionTracker();
        // 此实现由子类实现,创建处理链
        setupRequestProcessors();

        startRequestThrottler();

        registerJMX();

        startJvmPauseMonitor();

        registerMetrics();

        setState(State.RUNNING);

        requestPathMetricsCollector.start();

        localSessionEnabled = sessionTracker.isLocalSessionsEnabled();
        notifyAll();
    }
    
    // org.apache.zookeeper.server.quorum.FollowerZooKeeperServer#setupRequestProcessors
    @Override
    protected void setupRequestProcessors() {
        //最后一个处理器是 FinalRequestProcessor
        RequestProcessor finalProcessor = new FinalRequestProcessor(this);
        // 倒数第二个处理器是 CommitProcessor
        commitProcessor = new CommitProcessor(finalProcessor, Long.toString(getServerId()), true, getZooKeeperServerListener());
        commitProcessor.start();
        // 倒数第三个处理器是 FollowerRequestProcessor
        // 所以，最终的调用链是 FollowerRequestProcessor -> CommitProcessor -> FinalRequestProcessor 
        firstProcessor = new FollowerRequestProcessor(this, commitProcessor);
        ((FollowerRequestProcessor) firstProcessor).start();
        // 另外还有一个 SyncRequestProcessor 单独启动
        syncProcessor = new SyncRequestProcessor(this, new SendAckRequestProcessor(getFollower()));
        syncProcessor.start();
    }

 

三、Leader 的处理链的建立

    // LEADING 时，创建 Leader 实例， 调用 lead() 处理，仍然会存在内部处理，抛出异常后进行重新获取状态判定
    case LEADING:
        LOG.info("LEADING");
        try {
            setLeader(makeLeader(logFactory));
            leader.lead();
            setLeader(null);
        } catch (Exception e) {
            LOG.warn("Unexpected exception", e);
        } finally {
            if (leader != null) {
                leader.shutdown("Forcing shutdown");
                setLeader(null);
            }
            updateServerState();
        }
        break;
    }
    // org.apache.zookeeper.server.quorum.QuorumPeer#makeLeader
    protected Leader makeLeader(FileTxnSnapLog logFactory) throws IOException, X509Exception {
        // LeaderZooKeeperServer 负责进行通信类，数据类操作
        // Leader 本身则只进行调度服务
        return new Leader(this, new LeaderZooKeeperServer(logFactory, this, this.zkDb));
    }
    
    // org.apache.zookeeper.server.quorum.Leader#lead
    /**
     * This method is main function that is called to lead
     *
     * @throws IOException
     * @throws InterruptedException
     */
    void lead() throws IOException, InterruptedException {
        self.end_fle = Time.currentElapsedTime();
        long electionTimeTaken = self.end_fle - self.start_fle;
        self.setElectionTimeTaken(electionTimeTaken);
        ServerMetrics.getMetrics().ELECTION_TIME.add(electionTimeTaken);
        LOG.info("LEADING - LEADER ELECTION TOOK - {} {}", electionTimeTaken, QuorumPeer.FLE_TIME_UNIT);
        self.start_fle = 0;
        self.end_fle = 0;

        // 环境初始化
        zk.registerJMX(new LeaderBean(this, zk), self.jmxLocalPeerBean);

        try {
            self.setZabState(QuorumPeer.ZabState.DISCOVERY);
            self.tick.set(0);
            zk.loadData();

            leaderStateSummary = new StateSummary(self.getCurrentEpoch(), zk.getLastProcessedZxid());

            // Start thread that waits for connection requests from
            // new followers.
            // 开启服务端接收数据线程， sock 端口已在构造函数中初始化好了
            cnxAcceptor = new LearnerCnxAcceptor();
            cnxAcceptor.start();

            long epoch = getEpochToPropose(self.getId(), self.getAcceptedEpoch());

            zk.setZxid(ZxidUtils.makeZxid(epoch, 0));

            synchronized (this) {
                lastProposed = zk.getZxid();
            }

            newLeaderProposal.packet = new QuorumPacket(NEWLEADER, zk.getZxid(), null, null);

            if ((newLeaderProposal.packet.getZxid() & 0xffffffffL) != 0) {
                LOG.info("NEWLEADER proposal has Zxid of {}", Long.toHexString(newLeaderProposal.packet.getZxid()));
            }

            QuorumVerifier lastSeenQV = self.getLastSeenQuorumVerifier();
            QuorumVerifier curQV = self.getQuorumVerifier();
            if (curQV.getVersion() == 0 && curQV.getVersion() == lastSeenQV.getVersion()) {
                // This was added in ZOOKEEPER-1783. The initial config has version 0 (not explicitly
                // specified by the user; the lack of version in a config file is interpreted as version=0).
                // As soon as a config is established we would like to increase its version so that it
                // takes presedence over other initial configs that were not established (such as a config
                // of a server trying to join the ensemble, which may be a partial view of the system, not the full config).
                // We chose to set the new version to the one of the NEWLEADER message. However, before we can do that
                // there must be agreement on the new version, so we can only change the version when sending/receiving UPTODATE,
                // not when sending/receiving NEWLEADER. In other words, we can't change curQV here since its the committed quorum verifier,
                // and there's still no agreement on the new version that we'd like to use. Instead, we use
                // lastSeenQuorumVerifier which is being sent with NEWLEADER message
                // so its a good way to let followers know about the new version. (The original reason for sending
                // lastSeenQuorumVerifier with NEWLEADER is so that the leader completes any potentially uncommitted reconfigs
                // that it finds before starting to propose operations. Here we're reusing the same code path for
                // reaching consensus on the new version number.)

                // It is important that this is done before the leader executes waitForEpochAck,
                // so before LearnerHandlers return from their waitForEpochAck
                // hence before they construct the NEWLEADER message containing
                // the last-seen-quorumverifier of the leader, which we change below
                try {
                    QuorumVerifier newQV = self.configFromString(curQV.toString());
                    newQV.setVersion(zk.getZxid());
                    self.setLastSeenQuorumVerifier(newQV, true);
                } catch (Exception e) {
                    throw new IOException(e);
                }
            }

            newLeaderProposal.addQuorumVerifier(self.getQuorumVerifier());
            if (self.getLastSeenQuorumVerifier().getVersion() > self.getQuorumVerifier().getVersion()) {
                newLeaderProposal.addQuorumVerifier(self.getLastSeenQuorumVerifier());
            }

            // We have to get at least a majority of servers in sync with
            // us. We do this by waiting for the NEWLEADER packet to get
            // acknowledged

            waitForEpochAck(self.getId(), leaderStateSummary);
            self.setCurrentEpoch(epoch);
            self.setLeaderAddressAndId(self.getQuorumAddress(), self.getId());
            self.setZabState(QuorumPeer.ZabState.SYNCHRONIZATION);

            try {
                waitForNewLeaderAck(self.getId(), zk.getZxid());
            } catch (InterruptedException e) {
                shutdown("Waiting for a quorum of followers, only synced with sids: [ "
                         + newLeaderProposal.ackSetsToString()
                         + " ]");
                HashSet<Long> followerSet = new HashSet<Long>();

                for (LearnerHandler f : getLearners()) {
                    if (self.getQuorumVerifier().getVotingMembers().containsKey(f.getSid())) {
                        followerSet.add(f.getSid());
                    }
                }
                boolean initTicksShouldBeIncreased = true;
                for (Proposal.QuorumVerifierAcksetPair qvAckset : newLeaderProposal.qvAcksetPairs) {
                    if (!qvAckset.getQuorumVerifier().containsQuorum(followerSet)) {
                        initTicksShouldBeIncreased = false;
                        break;
                    }
                }
                if (initTicksShouldBeIncreased) {
                    LOG.warn("Enough followers present. Perhaps the initTicks need to be increased.");
                }
                return;
            }

            // 开启服务器，进入链路创建
            startZkServer();

            /**
             * WARNING: do not use this for anything other than QA testing
             * on a real cluster. Specifically to enable verification that quorum
             * can handle the lower 32bit roll-over issue identified in
             * ZOOKEEPER-1277. Without this option it would take a very long
             * time (on order of a month say) to see the 4 billion writes
             * necessary to cause the roll-over to occur.
             *
             * This field allows you to override the zxid of the server. Typically
             * you'll want to set it to something like 0xfffffff0 and then
             * start the quorum, run some operations and see the re-election.
             */
            String initialZxid = System.getProperty("zookeeper.testingonly.initialZxid");
            if (initialZxid != null) {
                long zxid = Long.parseLong(initialZxid);
                zk.setZxid((zk.getZxid() & 0xffffffff00000000L) | zxid);
            }

            if (!System.getProperty("zookeeper.leaderServes", "yes").equals("no")) {
                self.setZooKeeperServer(zk);
            }

            self.setZabState(QuorumPeer.ZabState.BROADCAST);
            self.adminServer.setZooKeeperServer(zk);

            // Everything is a go, simply start counting the ticks
            // WARNING: I couldn't find any wait statement on a synchronized
            // block that would be notified by this notifyAll() call, so
            // I commented it out
            //synchronized (this) {
            //    notifyAll();
            //}
            // We ping twice a tick, so we only update the tick every other
            // iteration
            boolean tickSkip = true;
            // If not null then shutdown this leader
            String shutdownMessage = null;

            while (true) {
                synchronized (this) {
                    long start = Time.currentElapsedTime();
                    long cur = start;
                    long end = start + self.tickTime / 2;
                    while (cur < end) {
                        wait(end - cur);
                        cur = Time.currentElapsedTime();
                    }

                    if (!tickSkip) {
                        self.tick.incrementAndGet();
                    }

                    // We use an instance of SyncedLearnerTracker to
                    // track synced learners to make sure we still have a
                    // quorum of current (and potentially next pending) view.
                    SyncedLearnerTracker syncedAckSet = new SyncedLearnerTracker();
                    syncedAckSet.addQuorumVerifier(self.getQuorumVerifier());
                    if (self.getLastSeenQuorumVerifier() != null
                        && self.getLastSeenQuorumVerifier().getVersion() > self.getQuorumVerifier().getVersion()) {
                        syncedAckSet.addQuorumVerifier(self.getLastSeenQuorumVerifier());
                    }

                    syncedAckSet.addAck(self.getId());

                    for (LearnerHandler f : getLearners()) {
                        if (f.synced()) {
                            syncedAckSet.addAck(f.getSid());
                        }
                    }

                    // check leader running status
                    if (!this.isRunning()) {
                        // set shutdown flag
                        shutdownMessage = "Unexpected internal error";
                        break;
                    }

                    if (!tickSkip && !syncedAckSet.hasAllQuorums()) {
                        // Lost quorum of last committed and/or last proposed
                        // config, set shutdown flag
                        shutdownMessage = "Not sufficient followers synced, only synced with sids: [ "
                                          + syncedAckSet.ackSetsToString()
                                          + " ]";
                        break;
                    }
                    tickSkip = !tickSkip;
                }
                for (LearnerHandler f : getLearners()) {
                    f.ping();
                }
            }
            if (shutdownMessage != null) {
                shutdown(shutdownMessage);
                // leader goes in looking state
            }
        } finally {
            zk.unregisterJMX(this);
        }
    }
    
    // org.apache.zookeeper.server.quorum.Leader#startZkServer
    /**
     * Start up Leader ZooKeeper server and initialize zxid to the new epoch
     */
    private synchronized void startZkServer() {
        // Update lastCommitted and Db's zxid to a value representing the new epoch
        lastCommitted = zk.getZxid();
        LOG.info("Have quorum of supporters, sids: [{}]; starting up and setting last processed zxid: 0x{}",
                 newLeaderProposal.ackSetsToString(),
                 Long.toHexString(zk.getZxid()));

        /*
         * ZOOKEEPER-1324. the leader sends the new config it must complete
         *  to others inside a NEWLEADER message (see LearnerHandler where
         *  the NEWLEADER message is constructed), and once it has enough
         *  acks we must execute the following code so that it applies the
         *  config to itself.
         */
        QuorumVerifier newQV = self.getLastSeenQuorumVerifier();

        Long designatedLeader = getDesignatedLeader(newLeaderProposal, zk.getZxid());

        self.processReconfig(newQV, designatedLeader, zk.getZxid(), true);
        if (designatedLeader != self.getId()) {
            allowedToCommit = false;
        }

        leaderStartTime = Time.currentElapsedTime();
        // 仍然调用 zk 进行服务创建 
        zk.startup();
        /*
         * Update the election vote here to ensure that all members of the
         * ensemble report the same vote to new servers that start up and
         * send leader election notifications to the ensemble.
         *
         * @see https://issues.apache.org/jira/browse/ZOOKEEPER-1732
         */
        self.updateElectionVote(getEpoch());

        zk.getZKDatabase().setlastProcessedZxid(zk.getZxid());
    }

    // org.apache.zookeeper.server.quorum.LeaderZooKeeperServer#startup
    @Override
    public synchronized void startup() {
        super.startup();
        if (containerManager != null) {
            containerManager.start();
        }
    }
    // org.apache.zookeeper.server.ZooKeeperServer#startup
    // 父类框架
    public synchronized void startup() {
        if (sessionTracker == null) {
            createSessionTracker();
        }
        startSessionTracker();
        setupRequestProcessors();

        startRequestThrottler();

        registerJMX();

        startJvmPauseMonitor();

        registerMetrics();

        setState(State.RUNNING);

        requestPathMetricsCollector.start();

        localSessionEnabled = sessionTracker.isLocalSessionsEnabled();
        notifyAll();
    }

    // org.apache.zookeeper.server.quorum.LeaderZooKeeperServer#setupRequestProcessors
    @Override
    protected void setupRequestProcessors() {
        // 最后一个处理器是 FinalRequestProcessor
        RequestProcessor finalProcessor = new FinalRequestProcessor(this);
        // 倒数第二个处理器是 ToBeAppliedRequestProcessor
        RequestProcessor toBeAppliedProcessor = new Leader.ToBeAppliedRequestProcessor(finalProcessor, getLeader());
        // 倒数第三个处理器是 CommitProcessor
        commitProcessor = new CommitProcessor(toBeAppliedProcessor, Long.toString(getServerId()), false, getZooKeeperServerListener());
        commitProcessor.start();
        // 倒数第四个处理器是 ProposalRequestProcessor
        ProposalRequestProcessor proposalProcessor = new ProposalRequestProcessor(this, commitProcessor);
        proposalProcessor.initialize();
        // 第二个处理器是 PrepRequestProcessor
        prepRequestProcessor = new PrepRequestProcessor(this, proposalProcessor);
        prepRequestProcessor.start();
        // 第一个处理器是 LeaderRequestProcessor
        firstProcessor = new LeaderRequestProcessor(this, prepRequestProcessor);
        
        // 所以最终的链路是 LeaderRequestProcessor -> PrepRequestProcessor -> ProposalRequestProcessor -> CommitProcessor -> ToBeAppliedRequestProcessor -> FinalRequestProcessor
        setupContainerManager();
    }
    private synchronized void setupContainerManager() {
        containerManager = new ContainerManager(
            getZKDatabase(),
            prepRequestProcessor,
            Integer.getInteger("znode.container.checkIntervalMs", (int) TimeUnit.MINUTES.toMillis(1)),
            Integer.getInteger("znode.container.maxPerMinute", 10000));
    }

 

四、Observer 的链路创建过程

    // 创建 Observer, 调用 observeLeader() 方法
    case OBSERVING:
        try {
            LOG.info("OBSERVING");
            setObserver(makeObserver(logFactory));
            observer.observeLeader();
        } catch (Exception e) {
            LOG.warn("Unexpected exception", e);
        } finally {
            observer.shutdown();
            setObserver(null);
            updateServerState();

            // Add delay jitter before we switch to LOOKING
            // state to reduce the load of ObserverMaster
            if (isRunning()) {
                Observer.waitForObserverElectionDelay();
            }
        }
        break;

    // org.apache.zookeeper.server.quorum.Observer#observeLeader
    /**
     * the main method called by the observer to observe the leader
     * @throws Exception
     */
    void observeLeader() throws Exception {
        zk.registerJMX(new ObserverBean(this, zk), self.jmxLocalPeerBean);
        long connectTime = 0;
        boolean completedSync = false;
        try {
            self.setZabState(QuorumPeer.ZabState.DISCOVERY);
            QuorumServer master = findLearnerMaster();
            try {
                connectToLeader(master.addr, master.hostname);
                connectTime = System.currentTimeMillis();
                long newLeaderZxid = registerWithLeader(Leader.OBSERVERINFO);
                if (self.isReconfigStateChange()) {
                    throw new Exception("learned about role change");
                }

                self.setLeaderAddressAndId(master.addr, master.getId());
                self.setZabState(QuorumPeer.ZabState.SYNCHRONIZATION);
                // 与 Leader 同步时，建立处理链路，调用 父类 Learner 的方法
                syncWithLeader(newLeaderZxid);
                self.setZabState(QuorumPeer.ZabState.BROADCAST);
                completedSync = true;
                QuorumPacket qp = new QuorumPacket();
                // 一直循环处理
                while (this.isRunning() && nextLearnerMaster.get() == null) {
                    readPacket(qp);
                    processPacket(qp);
                }
            } catch (Exception e) {
                LOG.warn("Exception when observing the leader", e);
                closeSocket();

                // clear pending revalidations
                pendingRevalidations.clear();
            }
        } finally {
            currentLearnerMaster = null;
            zk.unregisterJMX(this);
            if (connectTime != 0) {
                long connectionDuration = System.currentTimeMillis() - connectTime;

                LOG.info(
                    "Disconnected from leader (with address: {}). Was connected for {}ms. Sync state: {}",
                    leaderAddr,
                    connectionDuration,
                    completedSync);
                messageTracker.dumpToLog(leaderAddr.toString());
            }
        }
    }

    // org.apache.zookeeper.server.quorum.Learner#syncWithLeader
    /**
     * Finally, synchronize our history with the Leader (if Follower)
     * or the LearnerMaster (if Observer).
     * @param newLeaderZxid
     * @throws IOException
     * @throws InterruptedException
     */
    protected void syncWithLeader(long newLeaderZxid) throws Exception {
        QuorumPacket ack = new QuorumPacket(Leader.ACK, 0, null, null);
        QuorumPacket qp = new QuorumPacket();
        long newEpoch = ZxidUtils.getEpochFromZxid(newLeaderZxid);

        QuorumVerifier newLeaderQV = null;

        // In the DIFF case we don't need to do a snapshot because the transactions will sync on top of any existing snapshot
        // For SNAP and TRUNC the snapshot is needed to save that history
        boolean snapshotNeeded = true;
        boolean syncSnapshot = false;
        readPacket(qp);
        Deque<Long> packetsCommitted = new ArrayDeque<>();
        Deque<PacketInFlight> packetsNotCommitted = new ArrayDeque<>();
        synchronized (zk) {
            if (qp.getType() == Leader.DIFF) {
                LOG.info("Getting a diff from the leader 0x{}", Long.toHexString(qp.getZxid()));
                self.setSyncMode(QuorumPeer.SyncMode.DIFF);
                snapshotNeeded = false;
            } else if (qp.getType() == Leader.SNAP) {
                self.setSyncMode(QuorumPeer.SyncMode.SNAP);
                LOG.info("Getting a snapshot from leader 0x{}", Long.toHexString(qp.getZxid()));
                // The leader is going to dump the database
                // db is clear as part of deserializeSnapshot()
                zk.getZKDatabase().deserializeSnapshot(leaderIs);
                // ZOOKEEPER-2819: overwrite config node content extracted
                // from leader snapshot with local config, to avoid potential
                // inconsistency of config node content during rolling restart.
                if (!QuorumPeerConfig.isReconfigEnabled()) {
                    LOG.debug("Reset config node content from local config after deserialization of snapshot.");
                    zk.getZKDatabase().initConfigInZKDatabase(self.getQuorumVerifier());
                }
                String signature = leaderIs.readString("signature");
                if (!signature.equals("BenWasHere")) {
                    LOG.error("Missing signature. Got {}", signature);
                    throw new IOException("Missing signature");
                }
                zk.getZKDatabase().setlastProcessedZxid(qp.getZxid());

                // immediately persist the latest snapshot when there is txn log gap
                syncSnapshot = true;
            } else if (qp.getType() == Leader.TRUNC) {
                //we need to truncate the log to the lastzxid of the leader
                self.setSyncMode(QuorumPeer.SyncMode.TRUNC);
                LOG.warn("Truncating log to get in sync with the leader 0x{}", Long.toHexString(qp.getZxid()));
                boolean truncated = zk.getZKDatabase().truncateLog(qp.getZxid());
                if (!truncated) {
                    // not able to truncate the log
                    LOG.error("Not able to truncate the log 0x{}", Long.toHexString(qp.getZxid()));
                    System.exit(ExitCode.QUORUM_PACKET_ERROR.getValue());
                }
                zk.getZKDatabase().setlastProcessedZxid(qp.getZxid());

            } else {
                LOG.error("Got unexpected packet from leader: {}, exiting ... ", LearnerHandler.packetToString(qp));
                System.exit(ExitCode.QUORUM_PACKET_ERROR.getValue());

            }
            zk.getZKDatabase().initConfigInZKDatabase(self.getQuorumVerifier());
            zk.createSessionTracker();

            long lastQueued = 0;

            // in Zab V1.0 (ZK 3.4+) we might take a snapshot when we get the NEWLEADER message, but in pre V1.0
            // we take the snapshot on the UPDATE message, since Zab V1.0 also gets the UPDATE (after the NEWLEADER)
            // we need to make sure that we don't take the snapshot twice.
            boolean isPreZAB1_0 = true;
            //If we are not going to take the snapshot be sure the transactions are not applied in memory
            // but written out to the transaction log
            boolean writeToTxnLog = !snapshotNeeded;
            // we are now going to start getting transactions to apply followed by an UPTODATE
            outerLoop:
            while (self.isRunning()) {
                readPacket(qp);
                switch (qp.getType()) {
                case Leader.PROPOSAL:
                    PacketInFlight pif = new PacketInFlight();
                    pif.hdr = new TxnHeader();
                    pif.rec = SerializeUtils.deserializeTxn(qp.getData(), pif.hdr);
                    if (pif.hdr.getZxid() != lastQueued + 1) {
                        LOG.warn(
                            "Got zxid 0x{} expected 0x{}",
                            Long.toHexString(pif.hdr.getZxid()),
                            Long.toHexString(lastQueued + 1));
                    }
                    lastQueued = pif.hdr.getZxid();

                    if (pif.hdr.getType() == OpCode.reconfig) {
                        SetDataTxn setDataTxn = (SetDataTxn) pif.rec;
                        QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));
                        self.setLastSeenQuorumVerifier(qv, true);
                    }

                    packetsNotCommitted.add(pif);
                    break;
                case Leader.COMMIT:
                case Leader.COMMITANDACTIVATE:
                    pif = packetsNotCommitted.peekFirst();
                    if (pif.hdr.getZxid() == qp.getZxid() && qp.getType() == Leader.COMMITANDACTIVATE) {
                        QuorumVerifier qv = self.configFromString(new String(((SetDataTxn) pif.rec).getData()));
                        boolean majorChange = self.processReconfig(
                            qv,
                            ByteBuffer.wrap(qp.getData()).getLong(), qp.getZxid(),
                            true);
                        if (majorChange) {
                            throw new Exception("changes proposed in reconfig");
                        }
                    }
                    if (!writeToTxnLog) {
                        if (pif.hdr.getZxid() != qp.getZxid()) {
                            LOG.warn(
                                "Committing 0x{}, but next proposal is 0x{}",
                                Long.toHexString(qp.getZxid()),
                                Long.toHexString(pif.hdr.getZxid()));
                        } else {
                            zk.processTxn(pif.hdr, pif.rec);
                            packetsNotCommitted.remove();
                        }
                    } else {
                        packetsCommitted.add(qp.getZxid());
                    }
                    break;
                case Leader.INFORM:
                case Leader.INFORMANDACTIVATE:
                    PacketInFlight packet = new PacketInFlight();
                    packet.hdr = new TxnHeader();

                    if (qp.getType() == Leader.INFORMANDACTIVATE) {
                        ByteBuffer buffer = ByteBuffer.wrap(qp.getData());
                        long suggestedLeaderId = buffer.getLong();
                        byte[] remainingdata = new byte[buffer.remaining()];
                        buffer.get(remainingdata);
                        packet.rec = SerializeUtils.deserializeTxn(remainingdata, packet.hdr);
                        QuorumVerifier qv = self.configFromString(new String(((SetDataTxn) packet.rec).getData()));
                        boolean majorChange = self.processReconfig(qv, suggestedLeaderId, qp.getZxid(), true);
                        if (majorChange) {
                            throw new Exception("changes proposed in reconfig");
                        }
                    } else {
                        packet.rec = SerializeUtils.deserializeTxn(qp.getData(), packet.hdr);
                        // Log warning message if txn comes out-of-order
                        if (packet.hdr.getZxid() != lastQueued + 1) {
                            LOG.warn(
                                "Got zxid 0x{} expected 0x{}",
                                Long.toHexString(packet.hdr.getZxid()),
                                Long.toHexString(lastQueued + 1));
                        }
                        lastQueued = packet.hdr.getZxid();
                    }
                    if (!writeToTxnLog) {
                        // Apply to db directly if we haven't taken the snapshot
                        zk.processTxn(packet.hdr, packet.rec);
                    } else {
                        packetsNotCommitted.add(packet);
                        packetsCommitted.add(qp.getZxid());
                    }

                    break;
                case Leader.UPTODATE:
                    LOG.info("Learner received UPTODATE message");
                    if (newLeaderQV != null) {
                        boolean majorChange = self.processReconfig(newLeaderQV, null, null, true);
                        if (majorChange) {
                            throw new Exception("changes proposed in reconfig");
                        }
                    }
                    if (isPreZAB1_0) {
                        zk.takeSnapshot(syncSnapshot);
                        self.setCurrentEpoch(newEpoch);
                    }
                    self.setZooKeeperServer(zk);
                    self.adminServer.setZooKeeperServer(zk);
                    break outerLoop;
                case Leader.NEWLEADER: // Getting NEWLEADER here instead of in discovery
                    // means this is Zab 1.0
                    LOG.info("Learner received NEWLEADER message");
                    if (qp.getData() != null && qp.getData().length > 1) {
                        try {
                            QuorumVerifier qv = self.configFromString(new String(qp.getData()));
                            self.setLastSeenQuorumVerifier(qv, true);
                            newLeaderQV = qv;
                        } catch (Exception e) {
                            e.printStackTrace();
                        }
                    }

                    if (snapshotNeeded) {
                        zk.takeSnapshot(syncSnapshot);
                    }

                    self.setCurrentEpoch(newEpoch);
                    writeToTxnLog = true; //Anything after this needs to go to the transaction log, not applied directly in memory
                    isPreZAB1_0 = false;
                    writePacket(new QuorumPacket(Leader.ACK, newLeaderZxid, null, null), true);
                    break;
                }
            }
        }
        ack.setZxid(ZxidUtils.makeZxid(newEpoch, 0));
        writePacket(ack, true);
        sock.setSoTimeout(self.tickTime * self.syncLimit);
        self.setSyncMode(QuorumPeer.SyncMode.NONE);
        zk.startup();
        /*
         * Update the election vote here to ensure that all members of the
         * ensemble report the same vote to new servers that start up and
         * send leader election notifications to the ensemble.
         *
         * @see https://issues.apache.org/jira/browse/ZOOKEEPER-1732
         */
        self.updateElectionVote(newEpoch);

        // We need to log the stuff that came in between the snapshot and the uptodate
        if (zk instanceof FollowerZooKeeperServer) {
            FollowerZooKeeperServer fzk = (FollowerZooKeeperServer) zk;
            for (PacketInFlight p : packetsNotCommitted) {
                fzk.logRequest(p.hdr, p.rec);
            }
            for (Long zxid : packetsCommitted) {
                fzk.commit(zxid);
            }
        } else if (zk instanceof ObserverZooKeeperServer) {
            // Similar to follower, we need to log requests between the snapshot
            // and UPTODATE
            ObserverZooKeeperServer ozk = (ObserverZooKeeperServer) zk;
            for (PacketInFlight p : packetsNotCommitted) {
                Long zxid = packetsCommitted.peekFirst();
                if (p.hdr.getZxid() != zxid) {
                    // log warning message if there is no matching commit
                    // old leader send outstanding proposal to observer
                    LOG.warn(
                        "Committing 0x{}, but next proposal is 0x{}",
                        Long.toHexString(zxid),
                        Long.toHexString(p.hdr.getZxid()));
                    continue;
                }
                packetsCommitted.remove();
                Request request = new Request(null, p.hdr.getClientId(), p.hdr.getCxid(), p.hdr.getType(), null, null);
                request.setTxn(p.rec);
                request.setHdr(p.hdr);
                ozk.commitRequest(request);
            }
        } else {
            // New server type need to handle in-flight packets
            throw new UnsupportedOperationException("Unknown server type");
        }
    }

    // org.apache.zookeeper.server.ZooKeeperServer#startup
    public synchronized void startup() {
        if (sessionTracker == null) {
            createSessionTracker();
        }
        startSessionTracker();
        setupRequestProcessors();

        startRequestThrottler();

        registerJMX();

        startJvmPauseMonitor();

        registerMetrics();

        setState(State.RUNNING);

        requestPathMetricsCollector.start();

        localSessionEnabled = sessionTracker.isLocalSessionsEnabled();
        notifyAll();
    }

    // org.apache.zookeeper.server.quorum.ObserverZooKeeperServer#setupRequestProcessors
    /**
     * Set up the request processors for an Observer:
     * firstProcesor-&gt;commitProcessor-&gt;finalProcessor
     */
    @Override
    protected void setupRequestProcessors() {
        // We might consider changing the processor behaviour of
        // Observers to, for example, remove the disk sync requirements.
        // Currently, they behave almost exactly the same as followers.
        RequestProcessor finalProcessor = new FinalRequestProcessor(this);
        commitProcessor = new CommitProcessor(finalProcessor, Long.toString(getServerId()), true, getZooKeeperServerListener());
        commitProcessor.start();
        // 最终的处理链路是 ObserverRequestProcessor -> CommitProcessor -> FinalRequestProcessor
        firstProcessor = new ObserverRequestProcessor(this, commitProcessor);
        ((ObserverRequestProcessor) firstProcessor).start();

        /*
         * Observer should write to disk, so that the it won't request
         * too old txn from the leader which may lead to getting an entire
         * snapshot.
         *
         * However, this may degrade performance as it has to write to disk
         * and do periodic snapshot which may double the memory requirements
         */
        if (syncRequestProcessorEnabled) {
            syncProcessor = new SyncRequestProcessor(this, null);
            syncProcessor.start();
        }
    }

 

四、各个处理器的功能简要介绍

　　AckRequestProcessor: 将前一阶段的请求作为ACK转发给Leader。
　　CommitProcessor: 将到来的请求与本地提交的请求进行匹配，这是因为改变系统状态的本地请求的返回结果是到来的请求。
　　FinalRequestProcessor: 通常是请求处理链的最后一个处理器。
　　FollowerRequestProcessor: 将修改了系统状态的请求转发给Leader。
　　ObserverRequestProcessor: 同FollowerRequestProcessor一样，将修改了系统状态的请求转发给Leader。
　　PrepRequestProcessor: 通常是请求处理链的第一个处理器。
　　ProposalRequestProcessor: 将请求转发给AckRequestProcessor和SyncRequestProcessor。
　　ReadOnlyRequestProcessor: 是ReadOnlyZooKeeperServer请求处理链的第一个处理器，将只读请求传递给下个处理器，抛弃改变状态的请求。
　　SendAckRequestProcessor: 发送ACK请求的处理器。
　　SyncRequestProcessor: 发送Sync请求的处理器。
　　ToBeAppliedRequestProcessor: 维护toBeApplied列表，下个处理器必须是FinalRequestProcessor并且FinalRequestProcessor必须同步处理请求。

 

　　在这个创建过程，我们可以看到 几个设计模式的身影: 责任链模式、模板方法模式、状态模式。 以及如何及时处理来自来自服务端的请求。

　　看完各个处理器的整体架构之后，后续我再从各个细节看问题，相信会更容易理解全局。