zabbix_agent监控

实验环境

[root@linux-node1 ~]# cat /etc/redhat-release 
CentOS Linux release 7.2.1511 (Core) 

[root@linux-node1 ~]# cat /etc/hosts
192.168.56.11 linux-node1 linux-node1.example.com
192.168.56.12 linux-node2 linux-node2.example.com

[root@linux-node1 ~]# ip a | grep .11
    inet 192.168.56.11/24 brd 192.168.56.255 scope global eth0
    inet 172.16.0.11/24 brd 172.16.0.255 scope global eth1

一般所有的机器的agent都使用yum安装，zabbix_server的版本必须比zabbix_agent的要高。

rpm -ivh http://repo.zabbix.com/zabbix/3.0/rhel/7/x86_64/zabbix-release-3.0-1.el7.noarch.rpm
yum install zabbix-agent -y

修改agent的配置

[root@linux-node2 ~]# grep "^[a-Z]" /etc/zabbix/zabbix_agentd.conf
PidFile=/var/run/zabbix/zabbix_agentd.pid
LogFile=/var/log/zabbix/zabbix_agentd.log
LogFileSize=0
Server=192.168.56.11
ServerActive=127.0.0.1
Hostname=linux-node2.example.com
Include=/etc/zabbix/zabbix_agentd.d/
UnsafeUserParameters=1

加入开机自启动后查看端口

[root@linux-node2 ~]# systemctl start zabbix-agent.service

[root@linux-node2 ~]# systemctl enable zabbix-agent

[root@linux-node2 ~]# netstat -lntup | grep zabbix
tcp 0 0 0.0.0.0:10050 0.0.0.0:* LISTEN 18336/zabbix_agentd 
tcp6 0 0 :::10050 :::* LISTEN 18336/zabbix_agentd

 做好描述

选择模版

修改字体

选择控制面板的字体，把微软雅黑拷贝出来。上传到/usr/share/fonts/dejavu目录下，替换DejaVuSans.ttf。

[root@linux-node1 ~]# cd /usr/share/fonts/dejavu/
[root@linux-node1 dejavu]# ls
msyhbd.ttc  msyh.ttc

mv DejaVuSans.ttf DejaVuSans.ttf.bak
mv msyh.ttc DejaVuSans.ttf