飞腾PSSE系统配置静态IP

首先查看自己的活动网口

[root@localhost ~]# ifconfig
enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.31.34.96 netmask 255.255.255.0 broadcast 10.31.34.255
ether 00:1b:21:39:47:07 txqueuelen 1000 (Ethernet)
RX packets 2365 bytes 571335 (557.9 KiB)
RX errors 0 dropped 112 overruns 0 frame 0
TX packets 170 bytes 34821 (34.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 54 memory 0x581c0000-581e0000

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 17 bytes 3121 (3.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 17 bytes 3121 (3.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:ff:3b:0d txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

配置文件

vi /etc/sysconfig/network-scripts/ifcfg-enp1s0

添加如下内容

TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=enp1s0
UUID=73f96cc2-7b74-4976-8079-3110e345ff69
DEVICE=enp1s0
ONBOOT=yes
IPADDR="192.168.1.96"
NETMASK="255.255.255.0"
GATEWAY="192.168.1.254"
DNS1="114.114.114.114"

网卡UUID的查询方法

nmcli con show

重启机器