Installing Oracle 10g Enterprise Edition on Red Hat Enterprise Linux 5

Requirements

1、Hardware Requirements

Memory requirements:
• 1 GB for the instance with Database Control
Disk space requirements:
• 1.5 GB of swap space
• 400 MB of disk space in the /tmp directory
• Between 1.5 GB and 3.5 GB for the Oracle software
• 1.2 GB for the precongured database (optional)
• 2.4 GB for the ash recovery area (optional)

Software Requirements

Make sure that you have the following packages (libs): libXp, compat-libstdc++
It is required to have the following packages which you can check with the
following command:

rpm -q binutils compat-db control-center gcc gcc-c++ \
glibc glibc-common gnome-libs libstdc++ libstdc++-devel \
make pdksh sysstat xscreensaver

Changing the Red Hat Release

As RHEL5 has been released after Oracle 10g was, Oracle 10g does not support
RHEL5 officially. The latest version 10g supports in RHEL4. So we have to get
round it by changing the release conguration:

echo "rhel4" > /etc/redhat-release

Creating the oracle user account

We need to create oinstall and dba groups and an oracle account belonging to
them. When logged as root user,
/usr/sbin/groupadd oinstall
/usr/sbin/groupadd dba
/usr/sbin/useradd -m -g oinstall -G dba oracle
Set the password for the oracle user:
passwd oracle
(You can set "oracle" as the password too)

Creating the Installation Path and Setting the Permissions

mkdir -p /u01/app/oracle
chown -R oracle:oinstall /u01/app/oracle
chmod -R 775 /u01/app/oracle

Configuring Kernel Parameters

We can set the kernel parameters with the following command:

cat >> /etc/sysctl.conf << EOF
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 658576
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.wmem_default = 262144
net.core.rmem_max = 1048536
net.core.wmem_max = 1048536
EOF

Activate the modication with the following command:

/sbin/sysctl  p

 

Configuring Shell Limits

cat >> /etc/security/limits.conf << EOF
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
EOF
cat >> /etc/pam.d/login << EOF
session required /lib/security/pam_limits.so
EOF
cat >> /etc/profile << EOF
if [ \$USER = "oracle" ]; then
if [ \$SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
umask 022
fi
EOF
cat >> /etc/csh.login << EOF
if ( \$USER == "oracle" ) then
limit maxproc 16384
limit descriptors 65536
umask 022
endif
EOF

Environment Settings for Oracle User

In this section, we'll use oracle user.

su - oracle

To set the environment variables, apply the following command to append
Oracle-specific contents to /home/oracle/.bash_profile:

cat >> /home/oracle/.bash_profile << EOF
# User specific environment and startup programs
umask 022
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
export LD_LIBRARY_PATH=/usr/lib:/usr/X11R6/lib
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=\$ORACLE_BASE/product/10.2.0/db_1
export ORACLE_SID=orcl
PATH=\$ORACLE_HOME/bin:\$ORACLE_HOME/jdk/jre/lib/i386/server:\
\$ORACLE_HOME/rdbms/lib:\$ORACLE_HOME/lib:\$LD_LIBRARY_PATH:\
/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/sbin:\
/usr/sbin:/root/bin:\$PATH
PATH=\$PATH:\$HOME/bin
export PATH
unset USERNAME
EOF

Activate these variables and the paths with:

source ~/.bash_profile

Installation

In a root terminal,

su - oracle
Extract the 10201_database_linux32.zip file into /u01, or somewhere else where
oracle user has read right:

unzip 10201_database_linux32.zip -d /u01
cd /u01/database  ./runInstaller

The installation dialog will now start. If you face errors about some libs are
not found, consider installing the following packages: libXp compat-libstdc++
from http://www.rpm%1cnd.net/

Installation Steps

1. Select "Advanced Installation" and click Next.
2. Leave "Inventory directory path" and "group name" as it is and click
Next.
3. Leave "Enterprise Edition" selected and click Next.
4. Verify that the following information is true:
Name: OraDb10g_home1
Path: /u01/app/oracle/product/10.2.0/db_1
Be careful that it is not /u01/app/oracle/oracle/product/10.2.0/db_1
5. It will check the prerequisites. Do not start if there are any errors and be
careful about memory and environment variable warnings.
6
6. Leave "Create a database" selected and click Next.
7. Select Advanced and click Next.
8. Click Install and it will install the database system. Then DBCA starts
automatically, conguring the components you installed so far.
9. Select General Purpose and click Next.
10. Set orcl for Database Name and SID and click Next.
11. Leave "Congure the Database with Enterprise" checkbox selected and
click Next.
12. Assisgn a common password for SYS account, such as "oracle" and click
next.
13. Select Filesystem and click Next.
14. Select "Oracle-Managed Files" and click Next.
15. Leave recovery area as it is and click Next.
16. If you face a "Database Content" dialog, click Next with no additional
setting.
17. Set Use Unicode (AL32UTF8) as Database Character set and UTF16 as
National Character Set on the "Character Sets" tab.
18. Click Next and OK until you get a conrmation to create the database.
19. Close the information after the database is created. Click Exit.
20. The "Conguration assistant"s will start the components you installed
earlier.
21. You will face a dialog which wants you to execute two sh scripts. Open a
new terminal (as root) and run those scripts:
sh /u01/app/oracle/oraInventory/orainstRoot.sh
sh /u01/app/oracle/product/10.2.0/db_1/root.sh
22. Click OK after you run the scripts.
23. Click Exit.

Post-Installation

Starting the services

Now, the Oracle instance should be installed and working. Let's check it:
su - oracle
sqlplus / as sysdba
If it says "Connected to an idle instance", it means that the instance is not
started. Do the following:
lsnrctl start
emctl start dbconsole
sqlplus / as sysdba
startup (in sqlplus session)
You will get some feedback about the current status of the services and the
results of the commands.

Starting Oracle Instance up on System Startup

Open a text editor (as root) and put the content below in it, saving the file as
/etc/init.d/dbora :
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
#
# Set ORA_HOME to be equivalent to the $ORACLE_HOME
# from which you wish to execute dbstart and dbshut;

#
# Set ORA_OWNER to the user id of the owner of the
# Oracle database in ORA_HOME.
ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
if [ ! -f $ORA_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
su - $ORA_OWNER -c $ORA_HOME/bin/dbstart
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl start dbconsole"
;;
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl stop dbconsole"
su - $ORA_OWNER -c $ORA_HOME/bin/dbshut
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
;;
esac

Then, open a root terminal and give the file executable rights:
chmod 755 /etc/init.d/dbora
Then link this script to the files inside /etc/rc3.d:
ln -s /etc/init.d/dbora /etc/rc3.d/S99dbora
ln -s /etc/init.d/dbora /etc/rc4.d/S99dbora
ln -s /etc/init.d/dbora /etc/rc5.d/S99dbora
ln -s /etc/init.d/dbora /etc/rc0.d/K10dbora
ln -s /etc/init.d/dbora /etc/rc6.d/K10dbora

Fixing the dbstart script

The dbstart script, which is called inside the dbora script, has some errors. Open
the file /u01/app/oracle/product/10.2.0/db_1/bin/dbstart as oracle user and
change

ORACLE_HOME_LISTNER=/ade/vikrkuma_new/oracle
to
ORACLE_HOME_LISTNER=$ORACLE_HOME

Otherwise, your listener might not get started.

Flagging the orcl instance to be started

We open the /etc/oratab le and change the last letter from N to Y:
orcl:/u01/app/oracle/product/10.2.0/db_1:N
to
orcl:/u01/app/oracle/product/10.2.0/db_1:Y

Setting the IP Address
If the instance is running, shut it down with (as oracle user):
sqlplus / as sysdba
shutdown immediate (might cause data loss)
Then, open the /u01/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
le and set your hostname/static IP Address:
HOST = oracle10
Start the instance in sqlplus session:
startup

Good luck to you!