Hyperledger Fabric2.x fabcar查询、插入和更改拥有者实践

一、概述

上一篇文章，已经介绍了Hyperledger Fabric 2.x 环境搭建，参考链接：https://www.cnblogs.com/xiao987334176/p/13969885.html

接下来介绍如何使用它。

二、Hyperledger Fabric Samples

github地址：https://github.com/hyperledger/fabric-samples

您可以使用Fabric示例开始使用Hyperledger结构，探索重要的结构功能，并学习如何使用Fabric SDK构建与区块链网络交互的应用程序。

接下来介绍，如何将这个智能合约导入进去。

下载智能合约依赖

下载zip包

下载完成后，得到文件fabric-samples-master.zip

将文件上传到/opt目录

解压文件，并执行go命令

cd /opt/
unzip fabric-samples-master.zip
cd /opt/fabric-samples-master/chaincode/fabcar/go
go env -w GO111MODULE=on
go env -w GOPROXY=https://goproxy.cn,direct
go mod init
go mod vendor

执行完毕后，当前文件夹下多出vendor，这个就是放智能合约依赖包的文件夹

与网络互动

网络启动之后，可以使用peer cli客户端去操作网络，可以通过cli客户端去调用部署智能合约，更新通道，或者安装和部署新的智能合约。

首先确保操作目录为test-network目录，比如我的目录是：

/opt/fabric-2.2.1/scripts/fabric-samples/test-network

使用以下命令将二进制文件添加到cli路径：

export PATH=${PWD}/../bin:${PWD}:$PATH

还需要设置FABRIC_CFG_PATH路径指向fabric-samples中的core.yaml文件，命令如下：

export FABRIC_CFG_PATH=$PWD/../config/

组织1（Org1）部署智能合约

设置允许org1操作peer cli的环境变量：

# Environment variables for Org1
export CORE_PEER_TLS_ENABLED=true
export CORE_PEER_LOCALMSPID="Org1MSP"
export CORE_PEER_TLS_ROOTCERT_FILE=${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
export CORE_PEER_MSPCONFIGPATH=${PWD}/organizations/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
export CORE_PEER_ADDRESS=localhost:7051

添加hosts记录

vi /etc/hosts

内容如需：

127.0.0.1 orderer.example.com
127.0.0.1 peer0.org1.example.com
127.0.0.1 peer0.org2.example.com

注意：由于在本机运行，所以ip地址是127.0.0.1

打包智能合约

cd /opt/fabric-samples-master/chaincode/fabcar/go
peer lifecycle chaincode package fabcar.tar.gz --path /opt/fabric-samples-master/chaincode/fabcar/go/ --lang golang --label fabcar_1

ls查看当前目录，发现有了一个fabcar.tar.gz文件

[root@centos7_02 go]# ls
fabcar.go  fabcar.tar.gz  go.mod  go.sum  vendor

安装智能合约（时间会比较久，耐心稍等）

peer lifecycle chaincode install fabcar.tar.gz

输出：

2020-11-16 13:34:09.269 CST [cli.lifecycle.chaincode] submitInstallProposal -> INFO 001 Installed remotely: response:<status:200 payload:"\nIfabcar_1:762e0fe3dbeee0f7b08fb6200adeb4a3a20f649a00f168c0b3c2257e53b6e506\022\010fabcar_1" > 
2020-11-16 13:34:09.269 CST [cli.lifecycle.chaincode] submitInstallProposal -> INFO 002 Chaincode code package identifier: fabcar_1:762e0fe3dbeee0f7b08fb6200adeb4a3a20f649a00f168c0b3c2257e53b6e506

成功后返回status:200等信息

当前组织同意合约定义（需要用到上面一部返回的Package id）

export cafile=/opt/fabric-2.2.1/scripts/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

peer lifecycle chaincode approveformyorg --tls true --cafile $cafile --channelID mychannel --name fabcar --version 1 --init-required --package-id fabcar_1:762e0fe3dbeee0f7b08fb6200adeb4a3a20f649a00f168c0b3c2257e53b6e506 --sequence 1 –waitForEvent

输出：

2020-11-16 13:42:33.922 CST [cli.lifecycle.chaincode] setOrdererClient -> INFO 001 Retrieved channel (mychannel) orderer endpoint: orderer.example.com:7050
2020-11-16 13:42:35.964 CST [chaincodeCmd] ClientWait -> INFO 002 txid [7ac6f8b7673fefdaf87d14b3c31d99d507192bf416e23d740e514dd05de010f1] committed with status (VALID) at localhost:7051

此时检查合约定义是否满足策略

peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name fabcar --version 1 --sequence 1 --output json --init-required

输出：

{
    "approvals": {
        "Org1MSP": true,
        "Org2MSP": false
    }
}

Org2MSP这里显示未同意合约定义
那么需要进入Org2中的环境配置中重复合约安装并同意合约定义

切换环境到Org2

切换环境变量为peer0.org2.example.com的配置

export CORE_PEER_LOCALMSPID="Org2MSP"
export CORE_PEER_TLS_ROOTCERT_FILE=/opt/fabric-2.2.1/scripts/fabric-samples/test-network/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
export CORE_PEER_MSPCONFIGPATH=/opt/fabric-2.2.1/scripts/fabric-samples/test-network/organizations/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
export CORE_PEER_ADDRESS=peer0.org2.example.com:9051

组织2（Org2）部署智能合约

由于Org1已经打包了智能合约，Org2直接安装就可

cd /opt/fabric-samples-master/chaincode/fabcar/go
peer lifecycle chaincode install fabcar.tar.gz

输出：

2020-11-16 13:47:37.740 CST [cli.lifecycle.chaincode] submitInstallProposal -> INFO 001 Installed remotely: response:<status:200 payload:"\nIfabcar_1:762e0fe3dbeee0f7b08fb6200adeb4a3a20f649a00f168c0b3c2257e53b6e506\022\010fabcar_1" > 
2020-11-16 13:47:37.740 CST [cli.lifecycle.chaincode] submitInstallProposal -> INFO 002 Chaincode code package identifier: fabcar_1:762e0fe3dbeee0f7b08fb6200adeb4a3a20f649a00f168c0b3c2257e53b6e506

当前组织同意合约定义（需要用到上面一部返回的Package id）

export cafile=/opt/fabric-2.2.1/scripts/fabric-samples/test-network/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

peer lifecycle chaincode approveformyorg --tls true --cafile $cafile --channelID mychannel --name fabcar --version 1 --init-required --package-id fabcar_1:762e0fe3dbeee0f7b08fb6200adeb4a3a20f649a00f168c0b3c2257e53b6e506 --sequence 1 –waitForEvent

输出：

2020-11-16 13:49:31.806 CST [cli.lifecycle.chaincode] setOrdererClient -> INFO 001 Retrieved channel (mychannel) orderer endpoint: orderer.example.com:7050
2020-11-16 13:49:33.844 CST [chaincodeCmd] ClientWait -> INFO 002 txid [4b74a503343ca2f99a5a1b5827b8ba818eebd4fc059f9a6d62ed508a30fc98ec] committed with status (VALID) at peer0.org2.example.com:9051

再次检查合约定义是否满足策略

peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name fabcar --version 1 --sequence 1 --output json --init-required

输出：

{
    "approvals": {
        "Org1MSP": true,
        "Org2MSP": true
    }
}

过半数组织同意了智能合约定义
那么可以提交智能合约

export org1_CertFiles=/opt/fabric-2.2.1/scripts/fabric-samples/test-network/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
export org2_CertFiles=/opt/fabric-2.2.1/scripts/fabric-samples/test-network/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt

peer lifecycle chaincode commit -o orderer.example.com:7050 --tls true --cafile $cafile --channelID mychannel --name fabcar --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles  $org1_CertFiles --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles  $org2_CertFiles --version 1 --sequence 1 --init-required

输出：

2020-11-16 13:55:48.068 CST [chaincodeCmd] ClientWait -> INFO 001 txid [356869cdf5affcc19974fbe3f4367c570b0676d2ac5d35038382f216112b2f8f] committed with status (VALID) at peer0.org1.example.com:7051
2020-11-16 13:55:48.074 CST [chaincodeCmd] ClientWait -> INFO 002 txid [356869cdf5affcc19974fbe3f4367c570b0676d2ac5d35038382f216112b2f8f] committed with status (VALID) at peer0.org2.example.com:9051

成功后初始化智能合约

peer chaincode invoke -o orderer.example.com:7050 --tls true --cafile $cafile -C mychannel -n fabcar --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles $org1_CertFiles --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles $org2_CertFiles --isInit -c '{"Args":["InitLedger"]}'

输出：

2020-11-16 13:58:13.631 CST [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200

至此智能合约部署完成

调用智能合约

查询所有汽车

peer chaincode query -C mychannel -n fabcar -c '{"Args":["QueryAllCars"]}'

输出：

[{"Key":"CAR0","Record":{"make":"Toyota","model":"Prius","colour":"blue","owner":"Tomoko"}},{"Key":"CAR1","Record":{"make":"Ford","model":"Mustang","colour":"red","owner":"Brad"}},{"Key":"CAR2","Record":{"make":"Hyundai","model":"Tucson","colour":"green","owner":"Jin Soo"}},{"Key":"CAR3","Record":{"make":"Volkswagen","model":"Passat","colour":"yellow","owner":"Max"}},{"Key":"CAR4","Record":{"make":"Tesla","model":"S","colour":"black","owner":"Adriana"}},{"Key":"CAR5","Record":{"make":"Peugeot","model":"205","colour":"purple","owner":"Michel"}},{"Key":"CAR6","Record":{"make":"Chery","model":"S22L","colour":"white","owner":"Aarav"}},{"Key":"CAR7","Record":{"make":"Fiat","model":"Punto","colour":"violet","owner":"Pari"}},{"Key":"CAR8","Record":{"make":"Tata","model":"Nano","colour":"indigo","owner":"Valeria"}},{"Key":"CAR9","Record":{"make":"Holden","model":"Barina","colour":"brown","owner":"Shotaro"}}]

查询单部汽车

peer chaincode query -C mychannel -n fabcar -c '{"Args":["QueryCar","CAR0"]}'

输出：

{"make":"Toyota","model":"Prius","colour":"blue","owner":"Tomoko"}

新增一辆汽车

peer chaincode invoke -o orderer.example.com:7050 --tls true --cafile $cafile -C mychannel -n fabcar --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles $org1_CertFiles --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles $org2_CertFiles -c '{"Args":["CreateCar","CAR10","GEELY","Borui","Blue","Yujialing"]}'

输出：

2020-11-16 14:01:00.005 CST [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200

查询刚刚新增的车辆

peer chaincode query -C mychannel -n fabcar -c '{"Args":["QueryCar","CAR10"]}'

输出：

{"make":"GEELY","model":"Borui","colour":"Blue","owner":"Yujialing"}

更改刚刚新增车辆CAR10的车主为"广东靓仔"

peer chaincode invoke -o orderer.example.com:7050 --tls true --cafile $cafile -C mychannel -n fabcar --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles $org1_CertFiles --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles $org2_CertFiles -c '{"Args":["ChangeCarOwner","CAR10","广东靓仔"]}'

输出：

2020-11-16 14:03:20.053 CST [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200

再次查看CAR10信息看是否修改车主成功

peer chaincode query -C mychannel -n fabcar -c '{"Args":["QueryCar","CAR10"]}'

输出：

{"make":"GEELY","model":"Borui","colour":"Blue","owner":"广东靓仔"}

其他用go语言编写的智能合约也是相同的操作
Hyperledger Fabric 2.0的fabcar实践至此结束

本文参考链接：

https://blog.csdn.net/bean_business/article/details/108015490

posted @ 2020-11-16 14:05 肖祥阅读(1053) 评论(0) 编辑收藏举报

会员力量，点亮园子希望

刷新页面返回顶部

肖祥