opencv在VS2010命令行编译过程

最近这两天一直在研究命令行参数的编译，现代吗如下：

#include <highgui.h>
#include <math.h>
#include <cv.h>

IplImage *Igray = 0, *It = 0, *Iat;

int main( int argc, char** argv )
{
	//输入命令行
	double threshold = (double)atof( argv[1] ); //convert string to double
	int threshold_type = atoi( argv[2] ) ? CV_THRESH_BINARY : CV_THRESH_BINARY_INV;
	int adaptive_method = atoi( argv[3] ) ? CV_ADAPTIVE_THRESH_MEAN_C : CV_ADAPTIVE_THRESH_GAUSSIAN_C;
	int block_size = atoi( argv[4] );
	double offset = (double)atof( argv[5] );
	//加载灰度图
	if( ( Igray = cvLoadImage( argv[6], CV_LOAD_IMAGE_GRAYSCALE ) ) == 0 )
	{
		return -1;
	}
	//创建同样大小8位灰度图用于输出
	It = cvCreateImage( cvSize( Igray -> width, Igray -> height ), IPL_DEPTH_8U, 1 ); //单通道8位灰度图
	Iat = cvCreateImage( cvSize( Igray -> width, Igray -> height ), IPL_DEPTH_8U, 1 );
	//阈值化
	cvThreshold( Igray, It, threshold, 255, threshold_type );
	cvAdaptiveThreshold( Igray, Iat, 255, adaptive_method, threshold_type, block_size, offset );
	//命名窗体输出
	cvNamedWindow( "Raw", 1 );
	cvNamedWindow( "Threshold", 1 );
	cvNamedWindow( "Adaptive Threshold", 1 );
	cvShowImage( "Raw", Igray );
	cvShowImage( "Threshold", It );
	cvShowImage( "Adaptive Threshold", Iat );
	cvWaitKey(0);
	//回收内存
	cvReleaseImage( &Igray );
	cvReleaseImage( &It );
	cvReleaseImage( &Iat );
	cvDestroyWindow( "Raw" );
	cvDestroyWindow( "Threshold" );
	cvDestroyWindow( "Adaptive Threshold" );

	return 0;
}

　　上述代码是二值化和自适应二值化的比较，在该工程文件夹同级目录下面的Debug文件找到 自适应阈值.exe 文件，然后打开命令行提示符，针对上述文件可进行下面操作：

      1，首先进到Debug文件，找到.exe文件，如D:\myopencv\opencv\Code\Opencv\Debug

      2，在命令行输入下面：

         D:\myopencv\opencv\Code\Opencv\Debug>自适应阈值.exe 15 1 1 71 15 D:\myopencv\opencv\Code\Opencv\自适应阈值\2.jpg

      3，结果如下：

             

简单的和大家分享一下。