华为网络设备初始化登录配置

华为交换机telnet 登录配置

 

 

1. <Quidway> system-view

   [Quidway] interface gigabitethernet 1/0/0

   [Quidway-GigabitEthernet1/0/0] undo shutdown

   [Quidway-GigabitEthernet1/0/0] ip address 202.38.160.92 255.255.0.0

   [Quidway-GigabitEthernet1/0/0] quit

   # 配置登录验证方式

   [Quidway] aaa

   [Quidway-aaa] local-user huawei password cipher test2

   [Quidway-aaa] local-user huawei service-type telnet

   [Quidway-aaa] local-user huawei level 3

   [Quidway-aaa] quit

   [Quidway] user-interface vty 0 4

   [Quidway-ui-vty0-4] authentication-mode aaa

华为交换机ssh登录配置

 

 

1. 生成本地密钥对

    

   <Quidway> system-view
   [Quidway] rsa local-key-pair create
   The key name will be: Quidway_Host
   The range of public key size is (512 ~ 2048).
   NOTES: If the key modulus is greater than 512,
          It will take a few minutes.
   Input the bits in the modulus[default = 512]:
   Generating keys...
   .......++++++++++++
   ..........++++++++++++
   ...................................++++++++
   ......++++++++
   

    

2. 创建SSH用户

    

   说明：

   如果SSH用户的认证方式为password,必须配置同名的local-user用户。

   # 配置VTY用户界面。

   [Quidway] user-interface vty 0 4
   [Quidway-ui-vty0-4] authentication-mode aaa
   [Quidway-ui-vty0-4] protocol inbound ssh
   [Quidway-ui-vty0-4] quit
   

   # 新建用户名为Client001的SSH用户，且认证方式为password。

   <Quidway> system-view
   [Quidway] ssh user client001 authentication-type password
   

   # 为SSH用户Client001配置密码为huawei。

   [Quidway] aaa
   [Quidway-aaa] local-user client001 password simple huawei
   [Quidway-aaa] local-user client001 service-type ssh