http 状态码 504 502
/* * ==================================================================== * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * ==================================================================== * * This software consists of voluntary contributions made by many * individuals on behalf of the Apache Software Foundation. For more * information on the Apache Software Foundation, please see * <http://www.apache.org/>. * */ package org.apache.http; /** * Constants enumerating the HTTP status codes. * All status codes defined in RFC1945 (HTTP/1.0), RFC2616 (HTTP/1.1), and * RFC2518 (WebDAV) are listed. * * @see StatusLine * * @since 4.0 */ public interface HttpStatus { // --- 1xx Informational --- /** <tt>100 Continue</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_CONTINUE = 100; /** <tt>101 Switching Protocols</tt> (HTTP/1.1 - RFC 2616)*/ public static final int SC_SWITCHING_PROTOCOLS = 101; /** <tt>102 Processing</tt> (WebDAV - RFC 2518) */ public static final int SC_PROCESSING = 102; // --- 2xx Success --- /** <tt>200 OK</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_OK = 200; /** <tt>201 Created</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_CREATED = 201; /** <tt>202 Accepted</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_ACCEPTED = 202; /** <tt>203 Non Authoritative Information</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_NON_AUTHORITATIVE_INFORMATION = 203; /** <tt>204 No Content</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_NO_CONTENT = 204; /** <tt>205 Reset Content</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_RESET_CONTENT = 205; /** <tt>206 Partial Content</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_PARTIAL_CONTENT = 206; /** * <tt>207 Multi-Status</tt> (WebDAV - RFC 2518) or <tt>207 Partial Update * OK</tt> (HTTP/1.1 - draft-ietf-http-v11-spec-rev-01?) */ public static final int SC_MULTI_STATUS = 207; // --- 3xx Redirection --- /** <tt>300 Mutliple Choices</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_MULTIPLE_CHOICES = 300; /** <tt>301 Moved Permanently</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_MOVED_PERMANENTLY = 301; /** <tt>302 Moved Temporarily</tt> (Sometimes <tt>Found</tt>) (HTTP/1.0 - RFC 1945) */ public static final int SC_MOVED_TEMPORARILY = 302; /** <tt>303 See Other</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_SEE_OTHER = 303; /** <tt>304 Not Modified</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_NOT_MODIFIED = 304; /** <tt>305 Use Proxy</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_USE_PROXY = 305; /** <tt>307 Temporary Redirect</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_TEMPORARY_REDIRECT = 307; // --- 4xx Client Error --- /** <tt>400 Bad Request</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_BAD_REQUEST = 400; /** <tt>401 Unauthorized</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_UNAUTHORIZED = 401; /** <tt>402 Payment Required</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_PAYMENT_REQUIRED = 402; /** <tt>403 Forbidden</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_FORBIDDEN = 403; /** <tt>404 Not Found</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_NOT_FOUND = 404; /** <tt>405 Method Not Allowed</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_METHOD_NOT_ALLOWED = 405; /** <tt>406 Not Acceptable</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_NOT_ACCEPTABLE = 406; /** <tt>407 Proxy Authentication Required</tt> (HTTP/1.1 - RFC 2616)*/ public static final int SC_PROXY_AUTHENTICATION_REQUIRED = 407; /** <tt>408 Request Timeout</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_REQUEST_TIMEOUT = 408; /** <tt>409 Conflict</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_CONFLICT = 409; /** <tt>410 Gone</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_GONE = 410; /** <tt>411 Length Required</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_LENGTH_REQUIRED = 411; /** <tt>412 Precondition Failed</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_PRECONDITION_FAILED = 412; /** <tt>413 Request Entity Too Large</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_REQUEST_TOO_LONG = 413; /** <tt>414 Request-URI Too Long</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_REQUEST_URI_TOO_LONG = 414; /** <tt>415 Unsupported Media Type</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_UNSUPPORTED_MEDIA_TYPE = 415; /** <tt>416 Requested Range Not Satisfiable</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_REQUESTED_RANGE_NOT_SATISFIABLE = 416; /** <tt>417 Expectation Failed</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_EXPECTATION_FAILED = 417; /** * Static constant for a 418 error. * <tt>418 Unprocessable Entity</tt> (WebDAV drafts?) * or <tt>418 Reauthentication Required</tt> (HTTP/1.1 drafts?) */ // not used // public static final int SC_UNPROCESSABLE_ENTITY = 418; /** * Static constant for a 419 error. * <tt>419 Insufficient Space on Resource</tt> * (WebDAV - draft-ietf-webdav-protocol-05?) * or <tt>419 Proxy Reauthentication Required</tt> * (HTTP/1.1 drafts?) */ public static final int SC_INSUFFICIENT_SPACE_ON_RESOURCE = 419; /** * Static constant for a 420 error. * <tt>420 Method Failure</tt> * (WebDAV - draft-ietf-webdav-protocol-05?) */ public static final int SC_METHOD_FAILURE = 420; /** <tt>422 Unprocessable Entity</tt> (WebDAV - RFC 2518) */ public static final int SC_UNPROCESSABLE_ENTITY = 422; /** <tt>423 Locked</tt> (WebDAV - RFC 2518) */ public static final int SC_LOCKED = 423; /** <tt>424 Failed Dependency</tt> (WebDAV - RFC 2518) */ public static final int SC_FAILED_DEPENDENCY = 424; // --- 5xx Server Error --- /** <tt>500 Server Error</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_INTERNAL_SERVER_ERROR = 500; /** <tt>501 Not Implemented</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_NOT_IMPLEMENTED = 501; /** <tt>502 Bad Gateway</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_BAD_GATEWAY = 502; /** <tt>503 Service Unavailable</tt> (HTTP/1.0 - RFC 1945) */ public static final int SC_SERVICE_UNAVAILABLE = 503; /** <tt>504 Gateway Timeout</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_GATEWAY_TIMEOUT = 504; /** <tt>505 HTTP Version Not Supported</tt> (HTTP/1.1 - RFC 2616) */ public static final int SC_HTTP_VERSION_NOT_SUPPORTED = 505; /** <tt>507 Insufficient Storage</tt> (WebDAV - RFC 2518) */ public static final int SC_INSUFFICIENT_STORAGE = 507; }
http 各个状态返回值
code 定义在 org.apache.http.HttpStatus
转载来自于:http://desert3.iteye.com/blog/1136548
502 Bad Gateway:tomcat没有启动起来
504 Gateway Time-out: nginx报出来的错误,一般是nginx做为反向代理服务器的时候,所连接的应用服务器譬如tomcat无相应导致的
302(临时移动) 服务器目前正从不同位置的网页响应请求,但请求者应继续使用原有位置来进行以后的请求,302响应时,临时URL通过Location 字段返回给客户端。
304(未修改) 自从上次请求后,请求的网页未被修改过。服务器返回此响应时,不会返回网页内容。
307 - Temporary Redirect 许多浏览器会错误地响应302应答进行重定向,即使原来的请求是POST,即使它实际上只能在POST请求的应答是303时 才能重定向。由于这个原因,HTTP 1.1新增了307,以便更加清除地区分几个状态代码:当出现303应答时,浏览器可以跟随重定向的GET和POST请求;如果是307,301,302应答,则浏览器只能跟随对GET、HEAD请求的重定向。(HTTP 1.1新)
根据RFC2616D定义,对于HTTP Response响应码301、302、307,如果请求不是GET或者HEAD,而response返回的状态码是302,那么浏览器禁止重定向到新的请求,除非得到用户的确认!因为这可能会导致请求条件变更而出现。参考:RFC2616 Hypertext Transfer Protocol -- HTTP/1.1
相应的Java的HTTP Client包就是根据这个规范进行处理的,如果对返回Response状态码是307,301,302的POST请求设置setFollowRedirects,系统就会报错:java.lang.IllegalArgumentException: Entity enclosing requests cannot be redirected without user intervention!如果可以的话,把POST改成Get后即使在307响应码的情况下也能自动重定向
1xx响应信息提示
这些状态代码表示临时的响应。客户端在收到常规响应之前,应准备接收一个或多个1xx
• 100 - Continue 初始的请求已经接受,客户应当继续发送请求的其余部分。(HTTP 1.1新)
• 101 - Switching Protocols 服务器将遵从客户的请求转换到另外一种协议(HTTP 1.1新)
2xx - 成功
这类状态代码表明服务器成功地接受了客户端请求。
• 200 - OK 一切正常,对GET和POST请求的应答文档跟在后面。
• 201 - Created 服务器已经创建了文档,Location头给出了它的URL。
• 202 - Accepted 已经接受请求,但处理尚未完成。
• 203 - Non-Authoritative Information 文档已经正常地返回,但一些应答头可能不正确,因为使用的是文档的拷贝,非权威性信息(HTTP 1.1新)。
• 204 - No Content 没有新文档,浏览器应该继续显示原来的文档。如果用户定期地刷新页面,而Servlet可以确定用户文档足够新,这个状态代码是很有用的。
• 205 - Reset Content 没有新的内容,但浏览器应该重置它所显示的内容。用来强制浏览器清除表单输入内容(HTTP 1.1新)。
• 206 - Partial Content 客户发送了一个带有Range头的GET请求(分块请求),服务器完成了它(HTTP 1.1新)。
3xx - 重定向
客户端浏览器必须采取更多操作来实现请求。例如,浏览器可能不得不请求服务器上的不同的页面,或通过代理服务器重复该请求。
• 300 - Multiple Choices 客户请求的文档可以在多个位置找到,这些位置已经在返回的文档内列出。如果服务器要提出优先选择,则应该在Location应答头指明。
• 301 - Moved Permanently 客户请求的文档在其他地方,新的URL在Location头中给出,GET、HEAD请求时浏览器应该自动地访问新的URL。
• 302 - Found 类似于301,但新的URL应该被视为临时性的替代,而不是永久性的。注意,在HTTP1.0中对应的状态信息是“Moved Temporatily”。出现该状态代码时,浏览器能够自动访问新的URL,因此它是一个很有用的状态代码。注意这个状态代码有时候可以和301替换使 用。例如,如果浏览器错误地请求 http://host/~user (缺少了后面的斜杠),有的服务器返回301,有的则返回302。严格地说,我们只能假定只有当原来的请求是GET、HEAD时浏览器才会自动重定向。请参见307。
• 303 - See Other 类似于301/302,不同之处在于,如果原来的请求是POST,Location头指定的重定向目标文档应该通过GET提取,即该状态码存在的最主要意义是为了处理POST请求重定向到GET请求的情况(HTTP 1.1新)。
• 304 - Not Modified 客户端有缓冲的文档并发出了一个条件性的请求(一般是提供If-Modified-Since头表示客户只想比指定日期更新的文档)。服务器告诉客户,原来缓冲的文档还可以继续使用。
• 305 - Use Proxy 客户请求的文档应该通过Location头所指明的代理服务器提取(HTTP 1.1新)。
• 307 - Temporary Redirect 许多浏览器会错误地响应302应答进行重定向,即使原来的请求是POST,即使它实际上只能在POST请求的应答是303时 才能重定向。由于这个原因,HTTP 1.1新增了307,以便更加清除地区分几个状态代码:当出现303应答时,浏览器可以跟随重定向的GET和POST请求;如果是307,301,302应答,则浏览器只能跟随对GET、HEAD请求的重定向。(HTTP 1.1新)
4xx - 客户端错误
发生错误,客户端似乎有问题。例如,客户端请求不存在的页面,客户端未提供有效的身份验证信息。
• 400 - Bad Request 请求出现语法错误。
• 401 - Unauthorized 访问被拒绝,客户试图未经授权访问受密码保护的页面。应答中会包含一个WWW-Authenticate头,浏览器据此显示用户名字/密码对话框,然后在 填写合适的Authorization头后再次发出请求。IIS 定义了许多不同的 401 错误,它们指明更为具体的错误原因。这些具体的错误代码在浏览器中显示,但不在 IIS 日志中显示:
• 401.1 - 登录失败。
• 401.2 - 服务器配置导致登录失败。
• 401.3 - 由于 ACL 对资源的限制而未获得授权。
• 401.4 - 筛选器授权失败。
• 401.5 - ISAPI/CGI 应用程序授权失败。
• 401.7 –访问被 Web 服务器上的 URL 授权策略拒绝。这个错误代码为 IIS 6.0 所专用。
• 403 - Forbidden 资源不可用。服务器理解客户的请求,但拒绝处理它。通常由于服务器上文件或目录的权限设置导致。禁止访问:IIS 定义了许多不同的 403 错误,它们指明更为具体的错误原因:
• 403.1 - 执行访问被禁止。
• 403.2 - 读访问被禁止。
• 403.3 - 写访问被禁止。
• 403.4 - 要求 SSL。
• 403.5 - 要求 SSL 128。
• 403.6 - IP 地址被拒绝。
• 403.7 - 要求客户端证书。
• 403.8 - 站点访问被拒绝。
• 403.9 - 用户数过多。
• 403.10 - 配置无效。
• 403.11 - 密码更改。
• 403.12 - 拒绝访问映射表。
• 403.13 - 客户端证书被吊销。
• 403.14 - 拒绝目录列表。
• 403.15 - 超出客户端访问许可。
• 403.16 - 客户端证书不受信任或无效。
• 403.17 - 客户端证书已过期或尚未生效。
• 403.18 - 在当前的应用程序池中不能执行所请求的 URL。这个错误代码为 IIS 6.0 所专用。
• 403.19 - 不能为这个应用程序池中的客户端执行 CGI。这个错误代码为 IIS 6.0 所专用。
• 403.20 - Passport 登录失败。这个错误代码为 IIS 6.0 所专用。
• 404 - Not Found 无法找到指定位置的资源。这也是一个常用的应答。
• 404.0 -(无) – 没有找到文件或目录。
• 404.1 - 无法在所请求的端口上访问 Web 站点。
• 404.2 - Web 服务扩展锁定策略阻止本请求。
• 404.3 - MIME 映射策略阻止本请求。
• 405 - Method Not Allowed 请求方法(GET、POST、HEAD、DELETE、PUT、TRACE等)对指定的资源不适用,用来访问本页面的 HTTP 谓词不被允许(方法不被允许)(HTTP 1.1新)
• 406 - Not Acceptable 指定的资源已经找到,但它的MIME类型和客户在Accpet头中所指定的不兼容,客户端浏览器不接受所请求页面的 MIME 类型(HTTP 1.1新)。
• 407 - Proxy Authentication Required 要求进行代理身份验证,类似于401,表示客户必须先经过代理服务器的授权。(HTTP 1.1新)
• 408 - Request Timeout 在服务器许可的等待时间内,客户一直没有发出任何请求。客户可以在以后重复同一请求。(HTTP 1.1新)
• 409 - Conflict 通常和PUT请求有关。由于请求和资源的当前状态相冲突,因此请求不能成功。(HTTP 1.1新)
• 410 - Gone 所请求的文档已经不再可用,而且服务器不知道应该重定向到哪一个地址。它和404的不同在于,返回407表示文档永久地离开了指定的位置,而404表示由于未知的原因文档不可用。(HTTP 1.1新)
• 411 - Length Required 服务器不能处理请求,除非客户发送一个Content-Length头。(HTTP 1.1新)
• 412 - Precondition Failed 请求头中指定的一些前提条件失败(HTTP 1.1新)。
• 413 – Request Entity Too Large 目标文档的大小超过服务器当前愿意处理的大小。如果服务器认为自己能够稍后再处理该请求,则应该提供一个Retry-After头(HTTP 1.1新)。
• 414 - Request URI Too Long URI太长(HTTP 1.1新)。
• 415 – 不支持的媒体类型。
• 416 – Requested Range Not Satisfiable 服务器不能满足客户在请求中指定的Range头。(HTTP 1.1新) • 417 – 执行失败。
• 423 – 锁定的错误。
5xx - 服务器错误
服务器由于遇到错误而不能完成该请求。
• 500 - Internal Server Error 服务器遇到了意料不到的情况,不能完成客户的请求。
• 500.12 - 应用程序正忙于在 Web 服务器上重新启动。
• 500.13 - Web 服务器太忙。
• 500.15 - 不允许直接请求 Global.asa。
• 500.16 – UNC 授权凭据不正确。这个错误代码为 IIS 6.0 所专用。
• 500.18 – URL 授权存储不能打开。这个错误代码为 IIS 6.0 所专用。
• 500.100 - 内部 ASP 错误。
• 501 - Not Implemented 服务器不支持实现请求所需要的功能,页眉值指定了未实现的配置。例如,客户发出了一个服务器不支持的PUT请求。
• 502 - Bad Gateway 服务器作为网关或者代理时,为了完成请求访问下一个服务器,但该服务器返回了非法的应答。 亦说Web 服务器用作网关或代理服务器时收到了无效响应。
• 502.1 - CGI 应用程序超时。
• 502.2 - CGI 应用程序出错。
• 503 - Service Unavailable 服务不可用,服务器由于维护或者负载过重未能应答。例如,Servlet可能在数据库连接池已满的情况下返回503。服务器返回503时可以提供一个 Retry-After头。这个错误代码为 IIS 6.0 所专用。
• 504 - Gateway Timeout 网关超时,由作为代理或网关的服务器使用,表示不能及时地从远程服务器获得应答。(HTTP 1.1新) 。
• 505 - HTTP Version Not Supported 服务器不支持请求中所指明的HTTP版本。(HTTP 1.1新)
浙公网安备 33010602011771号