c#后台线程更新界面

参考文章《C# 线程更新UI界面》

 

主窗口

        public frmMain()
        {
            InitializeComponent();
        }

        /// <summary>
        /// 主窗口加载事件
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        private void frmMain_Load(object sender, EventArgs e)
        {
            try
            {

                //设置默认状态
                mc_MachineStatusHander = new Common.MachineStatusHandler();                
                mc_MachineStatusHander.mc_MachineProduceStatusHandler.UpdateMachineSignalDelegate += UpdateMachineSignalStatus;//后台线程中指定委托为更新界面方法

                mc_MachineStatusHander.ChangeStatus("Online", "运行", "WesChen", "001A");
                SettingLight();

            }
            catch (Exception ex)
            {
                ShowErrorMessage(ex.Message, "系统初始化");
                this.Close();
            }
        }

 

界面更新主方法

        /// <summary>
        /// 获取机器信号，并更新界面
        /// </summary>
        /// <param name="singnal">机器信号</param>
        delegate void UpdateMachineProduceSignalDelegate(Common.MachineProduceStatusHandler.SignalType singnal);
        private void UpdateMachineSignalStatus(Common.MachineProduceStatusHandler.SignalType signal)
        {
            if (InvokeRequired)
            {
                this.Invoke(new UpdateMachineProduceSignalDelegate(delegate (Common.MachineProduceStatusHandler.SignalType s)
                {

                    if (signal.ToString().IndexOf("X01") != -1)
                    {
                        btn_SignalX01.BackColor= System.Drawing.Color.FromArgb(255, 255, 255);
                        btn_SignalX01.ForeColor = System.Drawing.Color.FromArgb(0, 0, 0);
                    }
                    else
                    {
                        btn_SignalX01.BackColor = System.Drawing.Color.FromArgb(38, 45, 58);
                        btn_SignalX01.ForeColor = System.Drawing.Color.FromArgb(255, 255, 255);
                    }                    

                    lab_ProductCount.Text = "累计生产数量：" + mc_MachineStatusHander.mc_MachineProduceStatusHandler.ProductCount;
                    lab_LastLifeCycleTime.Text = "最后一次生产用时：" + Common.CommonFunction.FormatMilliseconds(mc_MachineStatusHander.mc_MachineProduceStatusHandler.LastProductUseMilliseconds);

                }), signal);
            }
            else
            {
                if (signal.ToString().IndexOf("X01") != -1)
                {
                    btn_SignalX01.BackColor = System.Drawing.Color.FromArgb(255, 255, 255);
                    btn_SignalX01.ForeColor = System.Drawing.Color.FromArgb(0, 0, 0);
                }
                else
                {
                    btn_SignalX01.BackColor = System.Drawing.Color.FromArgb(38, 45, 58);
                    btn_SignalX01.ForeColor = System.Drawing.Color.FromArgb(255, 255, 255);
                }               

                lab_ProductCount.Text = "累计生产数量：" + mc_MachineStatusHander.mc_MachineProduceStatusHandler.ProductCount;
                lab_LastLifeCycleTime.Text = "最后一次生产用时：" + Common.CommonFunction.FormatMilliseconds(mc_MachineStatusHander.mc_MachineProduceStatusHandler.LastProductUseMilliseconds);

            }
        }

后台线程

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

using System.Text.RegularExpressions;
using System.Diagnostics;

namespace MES_MonitoringClient.Common
{
    /// <summary>
    /// 机器生产状态
    /// </summary>
    public class MachineProduceStatusHandler
    {

        /// <summary>
        /// 信号类型
        /// </summary>
        public enum SignalType
        {
            Unknow,

            X01,
            X02,
            X03,

            X01_X02,
            X01_X03,

            X02_X03,

            X01_X02_X03
        }

        /// <summary>
        /// 回复信号前缀
        /// </summary>
        private static string singnalDefaultStart = Common.ConfigFileHandler.GetAppConfig("GetSerialPortDataDefaultSignal_StartPrefix");
        /// <summary>
        /// 回复信号后缀
        /// </summary>
        private static string singnalDefaultEnd = Common.ConfigFileHandler.GetAppConfig("GetSerialPortDataDefaultSignal_EndPrefix");

        /*-------------------------------------------------------------------------------------*/


        /// <summary>
        /// 产品生命周期（计算时间）
        /// </summary>
        //private List<MachineProcedure> _MachineProcedureListForTime=null;

        /// <summary>
        /// 产品生命周期（计算次数）
        /// </summary>
        private List<MachineProcedure> _MachineProcedureListForCount=null;


        /// <summary>
        /// 产品周期计数（生产数量）
        /// </summary>
        public int ProductCount = 0;

        /// <summary>
        /// 空产品周期计数（不完整[空啤]生产数量）
        /// </summary>
        public int ProductErrorCount = 0;

        /// <summary>
        /// 单次产品周期秒数
        /// </summary>
        public long LastProductUseMilliseconds = 0;

        /// <summary>
        /// 
        /// </summary>
        public Nullable<DateTime> LastX03SignalGetTime = null;

        /// <summary>
        /// 上一个信号
        /// </summary>
        public SignalType LastSignal;


        /// <summary>
        /// 更新机器信号后更新界面的方法与委托
        /// </summary>
        /// <param name="signalType"></param>
        public delegate void UpdateMachineSignal(SignalType signalType);
        public UpdateMachineSignal UpdateMachineSignalDelegate;

        /*-------------------------------------------------------------------------------------*/

        /// <summary>
        /// 构造函数，处理初始化的参数
        /// </summary>
        public MachineProduceStatusHandler()
        {
            //产品生命周期（计算时间）
            //_MachineProcedureListForTime = new List<MachineProcedure>();

            //产品生命周期（计算次数）
            _MachineProcedureListForCount = new List<MachineProcedure>();
        }


        /*-------------------------------------------------------------------------------------*/

        /// <summary>
        /// 更新信号方法
        /// </summary>
        /// <param name="newSingnal">新信号</param>
        public void ChangeSignal(string newSingnal)
        {
            string convertSingnalString = ConvertSingnalString(newSingnal);

            //判断是正常的信号
            if (!string.IsNullOrEmpty(convertSingnalString))
            {
                //判断X信号
                SignalType convertSingnalStatusType = ConvertSingnalStatus(convertSingnalString);

                if (convertSingnalStatusType != LastSignal)
                {
                    

                    #region 与上一次信号不同

                    if (convertSingnalStatusType == SignalType.X03)
                    {
                        #region 自动信号（区分上一个信号）


                        _MachineProcedureListForCount.Add(new MachineProcedure()
                        {
                            ProcedureID = convertSingnalString,
                            ProcedureCode = convertSingnalStatusType.ToString(),
                            ProcedureName = "自动",
                        });


                        if (LastSignal == SignalType.X01_X03)
                        {
                            //结束产品周期并计时
                            if (LastX03SignalGetTime.HasValue)
                            {
                                LastProductUseMilliseconds = (System.DateTime.Now - LastX03SignalGetTime.Value).Milliseconds;
                            }
                            LastX03SignalGetTime = System.DateTime.Now;
                        }
                        else if (LastSignal == SignalType.X02_X03)
                        {
                            //必须包含完整的生命周期才计数
                            if (CheckHaveRealProduceProcess(_MachineProcedureListForCount))
                            {
                                //计数
                                ProductCount++;

                                _MachineProcedureListForCount.Clear();
                                _MachineProcedureListForCount.Add(new MachineProcedure()
                                {
                                    ProcedureID = convertSingnalString,
                                    ProcedureCode = convertSingnalStatusType.ToString(),
                                    ProcedureName = "自动",
                                });
                            }
                        }

                        #endregion
                    }
                    else if (convertSingnalStatusType == SignalType.X01_X03 || convertSingnalStatusType == SignalType.X02_X03)
                    {
                        #region 开模完成==射胶完成（不区分上一个信号）
                        //产品生命周期（计算数量）
                        if (_MachineProcedureListForCount != null && _MachineProcedureListForCount.Count > 0)
                        {
                            //信号
                            string procedureNameString = string.Empty;
                            if (convertSingnalStatusType == SignalType.X01_X03) procedureNameString = "开模完成";
                            else if (convertSingnalStatusType == SignalType.X02_X03) procedureNameString = "自动射胶";

                            _MachineProcedureListForCount.Add(new MachineProcedure()
                            {
                                ProcedureID = convertSingnalString,
                                ProcedureCode = convertSingnalStatusType.ToString(),
                                ProcedureName = procedureNameString,
                            });
                        }

                        #endregion
                    }

                    #endregion

                    //上一个信号
                    LastSignal = convertSingnalStatusType;

                    //根据信号更新界面
                    UpdateMachineSignalDelegate(LastSignal);
                }
            }
        }

        /// <summary>
        /// 匹配信号是否正常
        /// 并返回信号中的模式数字
        /// </summary>
        /// <param name="inputSingnal">原信号</param>
        /// <returns></returns>
        private string ConvertSingnalString(string inputSingnal)
        {
            Regex regex = new Regex("^" + singnalDefaultStart + "[a-fA-F0-9]{4}" + singnalDefaultEnd + "$");
            Match match = regex.Match(inputSingnal);

            if (match.Success)
            {
                Regex regexMiddle = new Regex("(?<=(" + singnalDefaultStart + "))[.\\s\\S]*?(?=(" + singnalDefaultEnd + "))", RegexOptions.Multiline | RegexOptions.Singleline);
                Match matchMiddle = regexMiddle.Match(inputSingnal);

                return matchMiddle.Value;
            }
            else
            {
                return null;
            }
        }

        /// <summary>
        /// 模式数字转换为X[]信号
        /// </summary>
        /// <param name="inputSingnal">模式数字[0800,0400,0200,0C00,0A00,0600,0E00等模式数字]</param>
        /// <returns></returns>
        private SignalType ConvertSingnalStatus(string inputSingnal)
        {
            if (inputSingnal == "0800") return SignalType.X01; //开模终止信号
            else if (inputSingnal == "0400") return SignalType.X02;//射胶信号
            else if (inputSingnal == "0200") return SignalType.X03;//自动运行模式信号

            else if (inputSingnal == "0C00") return SignalType.X01_X02;
            else if (inputSingnal == "0A00") return SignalType.X01_X03;
            else if (inputSingnal == "0600") return SignalType.X02_X03;

            else if (inputSingnal == "0E00") return SignalType.X01_X02_X03;

            else return SignalType.Unknow;
        }

        /// <summary>
        /// 判断是否是真实的生产流程
        /// </summary>
        /// <param name="oldMachineProcedureList"></param>
        /// <returns></returns>
        private bool CheckHaveRealProduceProcess(List<MachineProcedure> oldMachineProcedureList)
        {
            bool resultFlag = false;

            bool isX01_X03 = false;
            bool isX02_X03 = false;
            bool isX03 = false;

            //判断是否有完整的信号
            foreach (var processItem in oldMachineProcedureList)
            {
                if (processItem.ProcedureCode == SignalType.X01_X03.ToString()) isX01_X03 = true;
                if (processItem.ProcedureCode == SignalType.X02_X03.ToString()) isX02_X03 = true;
                if (processItem.ProcedureCode == SignalType.X03.ToString()) isX03 = true;
            }

            //完整的信号则算正常生产流程
            if (isX01_X03 && isX02_X03 && isX03) resultFlag = true;

            return resultFlag;
        }
    }
}

 

 以上方法是可以正常从类内部更新winform界面的