项目执行shell脚本

#!/bin/sh
export PROFILE=dev
export JINLI_CONFIG_PASSWORD=jinli
export JINLI_ACCOUNT_PASSWORD=jinli
export JINLI_BUSINESS_PASSWORD=jinli
export JINLI_CONFIG_PORT=8888
export JINLI_REGISTRY_PORT=8761
export JINLI_AUTH_PORT=4000
export JINLI_ACCOUNT_PORT=5000
export JINLI_BUSINESS_PORT=7000
export JINLI_ZUUL_PORT=8080
export JAVA_HOME=/home/jdk/jdk1.8.0_271

case "$1" in
start)
    case "$2" in
        jinli-config)
            echo "jinli-config starting ..."
            nohup $JAVA_HOME/bin/java -jar -Xmx200m $(dirname $0)/jinli-config.jar >/dev/null 2>&1 &
            JINLI_CONFIG_PID=`lsof -i:$JINLI_CONFIG_PORT|grep "LISTEN"|awk '{print $2}'`
　　　　　　　　## -n 字符串长度大于1   grep "listen" 取出改字符所在的行，  awk 取出第二个参数
            until [ -n "$JINLI_CONFIG_PID" ]
                do
                  JINLI_CONFIG_PID=`lsof -i:$JINLI_CONFIG_PORT|grep "LISTEN"|awk '{print $2}'`
                done
            echo "jinli-config started, pid is $JINLI_CONFIG_PID"
            ;;
        jinli-registry)
            echo "jinli-registry starting ..."
            nohup $JAVA_HOME/bin/java -jar -Xmx256m $(dirname $0)/jinli-registry.jar >/dev/null 2>&1 &
            JINLI_REGISTRY_PID=`lsof -i:$JINLI_REGISTRY_PORT|grep "LISTEN"|awk '{print $2}'`
            until [ -n "$JINLI_REGISTRY_PID" ]
                do
                  JINLI_REGISTRY_PID=`lsof -i:$JINLI_REGISTRY_PORT|grep "LISTEN"|awk '{print $2}'`
                done
            echo "jinli-registry started, pid is $JINLI_REGISTRY_PID"
            ;;
        jinli-auth)
            echo "jinli-auth starting ..."
            nohup $JAVA_HOME/bin/java -jar -Dspring.profiles.active=$PROFILE -Xmx200m $(dirname $0)/jinli-auth.jar >/dev/null 2>&1 &
            JINLI_AUTH_PID=`lsof -i:$JINLI_AUTH_PORT|grep "LISTEN"|awk '{print $2}'`
            until [ -n "$JINLI_AUTH_PID" ]
                do
                  JINLI_AUTH_PID=`lsof -i:$JINLI_AUTH_PORT|grep "LISTEN"|awk '{print $2}'`
                done
            echo "jinli-auth started, pid is $JINLI_AUTH_PID"
            ;;
        jinli-account)
            echo "jinli-account starting ..."
            nohup $JAVA_HOME/bin/java -jar -Dspring.profiles.active=$PROFILE -Xmx200m $(dirname $0)/jinli-account.jar >/dev/null 2>&1 &
            JINLI_ACCOUNT_PID=`lsof -i:$JINLI_ACCOUNT_PORT|grep "LISTEN"|awk '{print $2}'`
            until [ -n "$JINLI_ACCOUNT_PID" ]
                do
                  JINLI_ACCOUNT_PID=`lsof -i:$JINLI_ACCOUNT_PORT|grep "LISTEN"|awk '{print $2}'`
                done
            echo "jinli-account started, pid is $JINLI_ACCOUNT_PID"
            ;;
        jinli-business)
            echo "jinli-business starting ..."
            nohup $JAVA_HOME/bin/java -jar -Dspring.profiles.active=$PROFILE -Xmx200m $(dirname $0)/jinli-business.jar >/dev/null 2>&1 &
            JINLI_BUSINESS_PID=`lsof -i:$JINLI_BUSINESS_PORT|grep "LISTEN"|awk '{print $2}'`
            until [ -n "$JINLI_BUSINESS_PID" ]
                do
                  JINLI_BUSINESS_PID=`lsof -i:$JINLI_BUSINESS_PORT|grep "LISTEN"|awk '{print $2}'`
                done
            echo "jinli-business started, pid is $JINLI_BUSINESS_PID"
            ;;
        jinli-zuul)
            echo "jinli-zuul starting ..."
            nohup $JAVA_HOME/bin/java -jar -Dspring.profiles.active=$PROFILE -Xmx200m $(dirname $0)/jinli-zuul.jar >/dev/null 2>&1 &
            JINLI_ZUUL_PID=`lsof -i:$JINLI_ZUUL_PORT|grep "LISTEN"|awk '{print $2}'`
            until [ -n "$JINLI_ZUUL_PID" ]
                do
                  JINLI_ZUUL_PID=`lsof -i:$JINLI_ZUUL_PORT|grep "LISTEN"|awk '{print $2}'`
                done
            echo "jinli-zuul started, pid is $JINLI_ZUUL_PID"
            ;;
        *)
　　　　　　## $0 代表文件名  如果没有第二个参数 那么依次执行以下命令
            $0 start jinli-config
            $0 start jinli-registry
            $0 start jinli-auth
            $0 start jinli-account
            $0 start jinli-business
            $0 start jinli-zuul
            echo "JINLI started success"
            ;;
    esac
    ;;
 stop)
    case "$2" in
        jinli-config)
            P_ID=`ps -ef | grep -w jinli-config.jar | grep -v "grep" | awk '{print $2}'`
            if [ "$P_ID" == "" ]; then
                echo "jinli-config process not exists or stop success"
            else
                kill -9 $P_ID
                echo "jinli-config killed success"
            fi
            ;;
        jinli-registry)
            P_ID=`ps -ef | grep -w jinli-registry.jar | grep -v "grep" | awk '{print $2}'`
            if [ "$P_ID" == "" ]; then
                echo "jinli-registry process not exists or stop success"
            else
                kill -9 $P_ID
                echo "jinli-registry killed success"
            fi
            ;;
        jinli-auth)
            P_ID=`ps -ef | grep -w jinli-auth.jar | grep -v "grep" | awk '{print $2}'`
            if [ "$P_ID" == "" ]; then
                echo "jinli-authprocess not exists or stop success"
            else
                kill -9 $P_ID
                echo "jinli-auth killed success"
            fi
            ;;
        jinli-account)
            P_ID=`ps -ef | grep -w jinli-account.jar | grep -v "grep" | awk '{print $2}'`
            if [ "$P_ID" == "" ]; then
                echo "jinli-account process not exists or stop success"
            else
                kill -9 $P_ID
                echo "jinli-account killed success"
            fi  
            ;;
        jinli-business)
            P_ID=`ps -ef | grep -w jinli-business.jar | grep -v "grep" | awk '{print $2}'`
            if [ "$P_ID" == "" ]; then
                echo "jinli-business process not exists or stop success"
            else
                kill -9 $P_ID
                echo "jinli-business killed success"
            fi
            ;;
        jinli-zuul)
            P_ID=`ps -ef | grep -w jinli-zuul.jar | grep -v "grep" | awk '{print $2}'`
            if [ "$P_ID" == "" ]; then
                echo "jinli-zuul process not exists or stop success"
            else
                kill -9 $P_ID
                echo "jinli-zuul killed success"
            fi
            ;;
        *)
            $0 stop jinli-config
            $0 stop jinli-registry
            $0 stop jinli-auth
            $0 stop jinli-account
            $0 stop jinli-business
            $0 stop jinli-zuul
            echo "JINLI stopped success"
            ;;
    esac
    ;;     
restart)
        $0 stop
        sleep 2
        $0 start
        echo "JINLI restarted success"
        ;;
*)
    echo "Usage: `basename $0` start|stop|restart [jinli-config | jinli-registry | jinli-auth | jinli-account | jinli-business  | jinli-zuul]"
    ;;   
esac    
exit 0