MD5算法简单的来说就是把任意长度的字串变换成固定长度（通常是128位）的16进制串。RFC 1321定义了MD5算法。
该文档可从http://www.ietf.org/rfc/rfc1321.txt 获得。MD5的用途主要有：
一致性验证。比如我们从网上下载了某个文件，网站上一般会给出该文件的MD5值，我们下载下来后，可以利用工具计算出
新的MD5值，与正确的MD5值进行对照，如果不一样，则可以断定该文件下载出错或被篡改了。
数字签名。可以用MD5算法对发布的程序或发布的消息生成MD5值作为签名等。
密码存储。在传输过程中或存储过程中，直接用明文的密码都是很危险的。可以在传输之前先用MD5加密，存储也不用存储
明文，可以直接存储MD5值。在验证时，先把输入的密码转换成MD5值再与存储值进行对比。
MD5的一个实现版本：
md5.h
/* Copyright (C) 1999, 2002 Aladdin Enterprises. All rights reserved. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. L. Peter Deutsch ghost@aladdin.com */ /* $Id: md5.h,v 1.2 2007/12/24 05:58:37 lilyco Exp $ */ /* Independent implementation of MD5 (RFC 1321). This code implements the MD5 Algorithm defined in RFC 1321, whose text is available at http://www.ietf.org/rfc/rfc1321.txt The code is derived from the text of the RFC, including the test suite (section A.5) but excluding the rest of Appendix A. It does not include any code or documentation that is identified in the RFC as being copyrighted. The original and principal author of md5.h is L. Peter Deutsch <ghost@aladdin.com>. Other authors are noted in the change history that follows (in reverse chronological order): 2002-04-13 lpd Removed support for non-ANSI compilers; removed references to Ghostscript; clarified derivation from RFC 1321; now handles byte order either statically or dynamically. 1999-11-04 lpd Edited comments slightly for automatic TOC extraction. 1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5); added conditionalization for C++ compilation from Martin Purschke <purschke@bnl.gov>. 1999-05-03 lpd Original version. */ #ifndef md5_INCLUDED # define md5_INCLUDED /* * This package supports both compile-time and run-time determination of CPU * byte order. If ARCH_IS_BIG_ENDIAN is defined as 0, the code will be * compiled to run only on little-endian CPUs; if ARCH_IS_BIG_ENDIAN is * defined as non-zero, the code will be compiled to run only on big-endian * CPUs; if ARCH_IS_BIG_ENDIAN is not defined, the code will be compiled to * run on either big- or little-endian CPUs, but will run slightly less * efficiently on either one than if ARCH_IS_BIG_ENDIAN is defined. */ typedef unsigned char md5_byte_t; /* 8-bit byte */ typedef unsigned int md5_word_t; /* 32-bit word */ /* Define the state of the MD5 Algorithm. */ typedef struct md5_state_s { md5_word_t count[2]; /* message length in bits, lsw first */ md5_word_t abcd[4]; /* digest buffer */ md5_byte_t buf[64]; /* accumulate block */ } md5_state_t; #ifdef __cplusplus extern "C" { #endif /* Initialize the algorithm. */ void md5_init(md5_state_t *pms); /* Append a string to the message. */ void md5_append(md5_state_t *pms, const md5_byte_t *data, int nbytes); /* Finish the message and return the digest. */ void md5_finish(md5_state_t *pms, md5_byte_t digest[16]); #ifdef __cplusplus } /* end extern "C" */ #endif #endif /* md5_INCLUDED */
md5.cpp
/* Copyright (C) 1999, 2000, 2002 Aladdin Enterprises. All rights reserved. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. L. Peter Deutsch ghost@aladdin.com */ /* $Id: md5.cpp,v 1.3 2008/01/20 22:52:04 lilyco Exp $ */ /* Independent implementation of MD5 (RFC 1321). This code implements the MD5 Algorithm defined in RFC 1321, whose text is available at http://www.ietf.org/rfc/rfc1321.txt The code is derived from the text of the RFC, including the test suite (section A.5) but excluding the rest of Appendix A. It does not include any code or documentation that is identified in the RFC as being copyrighted. The original and principal author of md5.c is L. Peter Deutsch <ghost@aladdin.com>. Other authors are noted in the change history that follows (in reverse chronological order): 2002-04-13 lpd Clarified derivation from RFC 1321; now handles byte order either statically or dynamically; added missing #include <string.h> in library. 2002-03-11 lpd Corrected argument list for main(), and added int return type, in test program and T value program. 2002-02-21 lpd Added missing #include <stdio.h> in test program. 2000-07-03 lpd Patched to eliminate warnings about "constant is unsigned in ANSI C, signed in traditional"; made test program self-checking. 1999-11-04 lpd Edited comments slightly for automatic TOC extraction. 1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5). 1999-05-03 lpd Original version. */ #include "md5.h" #include <string.h> #undef BYTE_ORDER /* 1 = big-endian, -1 = little-endian, 0 = unknown */ #ifdef ARCH_IS_BIG_ENDIAN # define BYTE_ORDER (ARCH_IS_BIG_ENDIAN ? 1 : -1) #else # define BYTE_ORDER 0 #endif #define T_MASK ((md5_word_t)~0) #define T1 /* 0xd76aa478 */ (T_MASK ^ 0x28955b87) #define T2 /* 0xe8c7b756 */ (T_MASK ^ 0x173848a9) #define T3 0x242070db #define T4 /* 0xc1bdceee */ (T_MASK ^ 0x3e423111) #define T5 /* 0xf57c0faf */ (T_MASK ^ 0x0a83f050) #define T6 0x4787c62a #define T7 /* 0xa8304613 */ (T_MASK ^ 0x57cfb9ec) #define T8 /* 0xfd469501 */ (T_MASK ^ 0x02b96afe) #define T9 0x698098d8 #define T10 /* 0x8b44f7af */ (T_MASK ^ 0x74bb0850) #define T11 /* 0xffff5bb1 */ (T_MASK ^ 0x0000a44e) #define T12 /* 0x895cd7be */ (T_MASK ^ 0x76a32841) #define T13 0x6b901122 #define T14 /* 0xfd987193 */ (T_MASK ^ 0x02678e6c) #define T15 /* 0xa679438e */ (T_MASK ^ 0x5986bc71) #define T16 0x49b40821 #define T17 /* 0xf61e2562 */ (T_MASK ^ 0x09e1da9d) #define T18 /* 0xc040b340 */ (T_MASK ^ 0x3fbf4cbf) #define T19 0x265e5a51 #define T20 /* 0xe9b6c7aa */ (T_MASK ^ 0x16493855) #define T21 /* 0xd62f105d */ (T_MASK ^ 0x29d0efa2) #define T22 0x02441453 #define T23 /* 0xd8a1e681 */ (T_MASK ^ 0x275e197e) #define T24 /* 0xe7d3fbc8 */ (T_MASK ^ 0x182c0437) #define T25 0x21e1cde6 #define T26 /* 0xc33707d6 */ (T_MASK ^ 0x3cc8f829) #define T27 /* 0xf4d50d87 */ (T_MASK ^ 0x0b2af278) #define T28 0x455a14ed #define T29 /* 0xa9e3e905 */ (T_MASK ^ 0x561c16fa) #define T30 /* 0xfcefa3f8 */ (T_MASK ^ 0x03105c07) #define T31 0x676f02d9 #define T32 /* 0x8d2a4c8a */ (T_MASK ^ 0x72d5b375) #define T33 /* 0xfffa3942 */ (T_MASK ^ 0x0005c6bd) #define T34 /* 0x8771f681 */ (T_MASK ^ 0x788e097e) #define T35 0x6d9d6122 #define T36 /* 0xfde5380c */ (T_MASK ^ 0x021ac7f3) #define T37 /* 0xa4beea44 */ (T_MASK ^ 0x5b4115bb) #define T38 0x4bdecfa9 #define T39 /* 0xf6bb4b60 */ (T_MASK ^ 0x0944b49f) #define T40 /* 0xbebfbc70 */ (T_MASK ^ 0x4140438f) #define T41 0x289b7ec6 #define T42 /* 0xeaa127fa */ (T_MASK ^ 0x155ed805) #define T43 /* 0xd4ef3085 */ (T_MASK ^ 0x2b10cf7a) #define T44 0x04881d05 #define T45 /* 0xd9d4d039 */ (T_MASK ^ 0x262b2fc6) #define T46 /* 0xe6db99e5 */ (T_MASK ^ 0x1924661a) #define T47 0x1fa27cf8 #define T48 /* 0xc4ac5665 */ (T_MASK ^ 0x3b53a99a) #define T49 /* 0xf4292244 */ (T_MASK ^ 0x0bd6ddbb) #define T50 0x432aff97 #define T51 /* 0xab9423a7 */ (T_MASK ^ 0x546bdc58) #define T52 /* 0xfc93a039 */ (T_MASK ^ 0x036c5fc6) #define T53 0x655b59c3 #define T54 /* 0x8f0ccc92 */ (T_MASK ^ 0x70f3336d) #define T55 /* 0xffeff47d */ (T_MASK ^ 0x00100b82) #define T56 /* 0x85845dd1 */ (T_MASK ^ 0x7a7ba22e) #define T57 0x6fa87e4f #define T58 /* 0xfe2ce6e0 */ (T_MASK ^ 0x01d3191f) #define T59 /* 0xa3014314 */ (T_MASK ^ 0x5cfebceb) #define T60 0x4e0811a1 #define T61 /* 0xf7537e82 */ (T_MASK ^ 0x08ac817d) #define T62 /* 0xbd3af235 */ (T_MASK ^ 0x42c50dca) #define T63 0x2ad7d2bb #define T64 /* 0xeb86d391 */ (T_MASK ^ 0x14792c6e) static void md5_process(md5_state_t *pms, const md5_byte_t *data /*[64]*/) { md5_word_t a = pms->abcd[0], b = pms->abcd[1], c = pms->abcd[2], d = pms->abcd[3]; md5_word_t t; #if BYTE_ORDER > 0 /* Define storage only for big-endian CPUs. */ md5_word_t X[16]; #else /* Define storage for little-endian or both types of CPUs. */ md5_word_t xbuf[16]; const md5_word_t *X; #endif { #if BYTE_ORDER == 0 /* * Determine dynamically whether this is a big-endian or * little-endian machine, since we can use a more efficient * algorithm on the latter. */ static const int w = 1; if (*((const md5_byte_t *)&w)) /* dynamic little-endian */ #endif #if BYTE_ORDER <= 0 /* little-endian */ { /* * On little-endian machines, we can process properly aligned * data without copying it. */ if (!((data - (const md5_byte_t *)0) & 3)) { /* data are properly aligned */ X = (const md5_word_t *)data; } else { /* not aligned */ memcpy(xbuf, data, 64); X = xbuf; } } #endif #if BYTE_ORDER == 0 else /* dynamic big-endian */ #endif #if BYTE_ORDER >= 0 /* big-endian */ { /* * On big-endian machines, we must arrange the bytes in the * right order. */ const md5_byte_t *xp = data; int i; # if BYTE_ORDER == 0 X = xbuf; /* (dynamic only) */ # else # define xbuf X /* (static only) */ # endif for (i = 0; i < 16; ++i, xp += 4) xbuf[i] = xp[0] + (xp[1] << 8) + (xp[2] << 16) + (xp[3] << 24); } #endif } #define ROTATE_LEFT(x, n) (((x) << (n)) | ((x) >> (32 - (n)))) /* Round 1. */ /* Let [abcd k s i] denote the operation a = b + ((a + F(b,c,d) + X[k] + T[i]) <<< s). */ #define F(x, y, z) (((x) & (y)) | (~(x) & (z))) #define SET(a, b, c, d, k, s, Ti)\ t = a + F(b,c,d) + X[k] + Ti;\ a = ROTATE_LEFT(t, s) + b /* Do the following 16 operations. */ SET(a, b, c, d, 0, 7, T1); SET(d, a, b, c, 1, 12, T2); SET(c, d, a, b, 2, 17, T3); SET(b, c, d, a, 3, 22, T4); SET(a, b, c, d, 4, 7, T5); SET(d, a, b, c, 5, 12, T6); SET(c, d, a, b, 6, 17, T7); SET(b, c, d, a, 7, 22, T8); SET(a, b, c, d, 8, 7, T9); SET(d, a, b, c, 9, 12, T10); SET(c, d, a, b, 10, 17, T11); SET(b, c, d, a, 11, 22, T12); SET(a, b, c, d, 12, 7, T13); SET(d, a, b, c, 13, 12, T14); SET(c, d, a, b, 14, 17, T15); SET(b, c, d, a, 15, 22, T16); #undef SET /* Round 2. */ /* Let [abcd k s i] denote the operation a = b + ((a + G(b,c,d) + X[k] + T[i]) <<< s). */ #define G(x, y, z) (((x) & (z)) | ((y) & ~(z))) #define SET(a, b, c, d, k, s, Ti)\ t = a + G(b,c,d) + X[k] + Ti;\ a = ROTATE_LEFT(t, s) + b /* Do the following 16 operations. */ SET(a, b, c, d, 1, 5, T17); SET(d, a, b, c, 6, 9, T18); SET(c, d, a, b, 11, 14, T19); SET(b, c, d, a, 0, 20, T20); SET(a, b, c, d, 5, 5, T21); SET(d, a, b, c, 10, 9, T22); SET(c, d, a, b, 15, 14, T23); SET(b, c, d, a, 4, 20, T24); SET(a, b, c, d, 9, 5, T25); SET(d, a, b, c, 14, 9, T26); SET(c, d, a, b, 3, 14, T27); SET(b, c, d, a, 8, 20, T28); SET(a, b, c, d, 13, 5, T29); SET(d, a, b, c, 2, 9, T30); SET(c, d, a, b, 7, 14, T31); SET(b, c, d, a, 12, 20, T32); #undef SET /* Round 3. */ /* Let [abcd k s t] denote the operation a = b + ((a + H(b,c,d) + X[k] + T[i]) <<< s). */ #define H(x, y, z) ((x) ^ (y) ^ (z)) #define SET(a, b, c, d, k, s, Ti)\ t = a + H(b,c,d) + X[k] + Ti;\ a = ROTATE_LEFT(t, s) + b /* Do the following 16 operations. */ SET(a, b, c, d, 5, 4, T33); SET(d, a, b, c, 8, 11, T34); SET(c, d, a, b, 11, 16, T35); SET(b, c, d, a, 14, 23, T36); SET(a, b, c, d, 1, 4, T37); SET(d, a, b, c, 4, 11, T38); SET(c, d, a, b, 7, 16, T39); SET(b, c, d, a, 10, 23, T40); SET(a, b, c, d, 13, 4, T41); SET(d, a, b, c, 0, 11, T42); SET(c, d, a, b, 3, 16, T43); SET(b, c, d, a, 6, 23, T44); SET(a, b, c, d, 9, 4, T45); SET(d, a, b, c, 12, 11, T46); SET(c, d, a, b, 15, 16, T47); SET(b, c, d, a, 2, 23, T48); #undef SET /* Round 4. */ /* Let [abcd k s t] denote the operation a = b + ((a + I(b,c,d) + X[k] + T[i]) <<< s). */ #define I(x, y, z) ((y) ^ ((x) | ~(z))) #define SET(a, b, c, d, k, s, Ti)\ t = a + I(b,c,d) + X[k] + Ti;\ a = ROTATE_LEFT(t, s) + b /* Do the following 16 operations. */ SET(a, b, c, d, 0, 6, T49); SET(d, a, b, c, 7, 10, T50); SET(c, d, a, b, 14, 15, T51); SET(b, c, d, a, 5, 21, T52); SET(a, b, c, d, 12, 6, T53); SET(d, a, b, c, 3, 10, T54); SET(c, d, a, b, 10, 15, T55); SET(b, c, d, a, 1, 21, T56); SET(a, b, c, d, 8, 6, T57); SET(d, a, b, c, 15, 10, T58); SET(c, d, a, b, 6, 15, T59); SET(b, c, d, a, 13, 21, T60); SET(a, b, c, d, 4, 6, T61); SET(d, a, b, c, 11, 10, T62); SET(c, d, a, b, 2, 15, T63); SET(b, c, d, a, 9, 21, T64); #undef SET /* Then perform the following additions. (That is increment each of the four registers by the value it had before this block was started.) */ pms->abcd[0] += a; pms->abcd[1] += b; pms->abcd[2] += c; pms->abcd[3] += d; } void md5_init(md5_state_t *pms) { pms->count[0] = pms->count[1] = 0; pms->abcd[0] = 0x67452301; pms->abcd[1] = /*0xefcdab89*/ T_MASK ^ 0x10325476; pms->abcd[2] = /*0x98badcfe*/ T_MASK ^ 0x67452301; pms->abcd[3] = 0x10325476; } void md5_append(md5_state_t *pms, const md5_byte_t *data, int nbytes) { const md5_byte_t *p = data; int left = nbytes; int offset = (pms->count[0] >> 3) & 63; md5_word_t nbits = (md5_word_t)(nbytes << 3); if (nbytes <= 0) return; /* Update the message length. */ pms->count[1] += nbytes >> 29; pms->count[0] += nbits; if (pms->count[0] < nbits) pms->count[1]++; /* Process an initial partial block. */ if (offset) { int copy = (offset + nbytes > 64 ? 64 - offset : nbytes); memcpy(pms->buf + offset, p, copy); if (offset + copy < 64) return; p += copy; left -= copy; md5_process(pms, pms->buf); } /* Process full blocks. */ for (; left >= 64; p += 64, left -= 64) md5_process(pms, p); /* Process a final partial block. */ if (left) memcpy(pms->buf, p, left); } void md5_finish(md5_state_t *pms, md5_byte_t digest[16]) { static const md5_byte_t pad[64] = { 0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; md5_byte_t data[8]; int i; /* Save the length before padding. */ for (i = 0; i < 8; ++i) data[i] = (md5_byte_t)(pms->count[i >> 2] >> ((i & 3) << 3)); /* Pad to 56 bytes mod 64. */ md5_append(pms, pad, ((55 - (pms->count[0] >> 3)) & 63) + 1); /* Append the length. */ md5_append(pms, data, 8); for (i = 0; i < 16; ++i) digest[i] = (md5_byte_t)(pms->abcd[i >> 2] >> ((i & 3) << 3)); }
使用实例：
#include <stdio.h> #include "md5.h" #include <string.h> int main() { md5_state_t s; md5_init(&s); char *ss = ""; md5_append(&s, (const unsigned char *)ss, strlen(ss)); unsigned char result[17] = {0}; md5_finish(&s, (unsigned char *)result); for (int i=0; i<16; i++) { printf("%x%x", (result[i]>>4)&(char)0x0f, result[i]&(char)0x0f); } printf("\n"); //空字符串的MD5值是：d41d8cd98f00b204e9800998ecf8427e return 0; }
