ActiveReports使用

　　最近要研究下ActiveReports,一开始先去网上找了个for .net 的版本.结果一开始就出问题了.按照网上的教程,结果到了添加报表文件这一项的时候，突然发现vs2008中的添加模版中没有ActiveReports文件.后来网上找了下,有的说是版问题,下了几个版本都不行.

　　后来在一个帖子中,内容如下,发现了问题所在,大概就是说vs2008需要下一个支持的版本.结果下载了之后,终于可以正常添加报表文件了.接下来继续研究,blog以后陆续更新关于ActiveReports的问题

原文地址: http://www.datadynamics.com/forums/112517/PrintPost.aspx

No ActiveReports project template in VS2008 after installing AR3

---

04-01-2008, 10:53 AM
I've installed a licensed AR3 onto VS2008. When I attempt to add a new project, I do not see an ActiveReports project template. Do I need to manually add it? How? Should the installation not have done that automatically?

Re: No ActiveReports project template in VS2008 after installing AR3

---

04-01-2008, 11:03 AM
Ooops. Sorry, :( I misread the instructions. There's no such thing as AR project template.

Re: No ActiveReports project template in VS2008 after installing AR3

---

04-01-2008, 11:05 AM
In the future, please post new threads in the correct forum.  This is the forum for ActiveReports for .NET 1.  The version 3 forums can be found here: http://www.datadynamics.com/forums/73/ShowForum.aspx

What build of ActiveReports have you installed?  You will need build 5.2.3.685 or newer in order to use ActiveReports in VS2008.  This build can be downloaded here: http://www.datadynamics.com/forums/72/ShowForum.aspx

Also, if you installed VS2008 after installing ActiveReports, you will need to re-install ActiveReports.