雾老师

沐雨

导航

二进制k8s安装

二进制方式安装kubernetes

一.角色分配：

master: 192.168.8.22
nodes: 192.168.8.23,192.168.8.24
#----------------------------------------------------------------------------------------
192.168.8.22 docker,etcd,flanneld，kubelet,kube_proxy,kube-apiserver、kube-controller-manager、kube-scheduler
192.168.8.23 docker,etcd,flanneld,kubelet,kube_proxy
192.168.8.24 docker,etcd,flanneld,kubelet,kube_proxy

二.环境准备：

1.关闭防火墙（三台机器同时进行）：

systemctl stop firewalld && systemctl disable firewalld

2.关闭SELINUX（三台机器同时进行）：

#将selinux改成disabled保存并退出
vi /etc/selinux/config
SELINUX=disabled

3.关闭Swap（三台机器同时进行）：

swapoff -a && sysctl -w vm.swappiness=0
#将内容里面的UUID进行注释
vi /etc/fstab
#UUID=75db221b-5797-4f81-ac79-d75622cdf625 /boot

4.安装Docker（三台机器同时进行）：

#运行该脚本就可以安装Docker18.09版本，若Docker版本太高，安装k8s会出现问题
#!/bin/bash
yum remove docker-*
yum update -y
yum install -y yum-utils   device-mapper-persistent-data   lvm2
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum -y install docker-ce-18.09.0 docker-ce-cli-18.09.0
systemctl start docker
systemctl enable docker
echo '{ 
"registry-mirrors": ["https://b24tskqv.mirror.aliyuncs.com"] 
}' > /etc/docker/daemon.json 
systemctl daemon-reload
systemctl restart docker

5.配置主机名和ip地址的对应关系：

vi /etc/hosts
#在该文件中添加（三台机器一起添加）
192.168.8.22 master
192.168.8.23 node1
192.168.8.24 node2
vi /etc/hostname
#配置主机名（分别添加）
在192.168.8.22中添加master，并将之前的内容删除
在192.168.8.23中添加node1，并将之前的内容删除
在192.168.8.24中添加node2，并将之前的内容删除
#执行完之后进行重启
reboot

6.免密码登录（三台机器两两配置免密码登录）：

#三台机器一起执行
ssh-keygen -t rsa
#上面这条命令生成公钥和私钥（一路执行回车）
#将公钥拷贝给对方，实现免密码登录
ssh-copy-id -i .ssh/id_rsa.pub root@master
ssh-copy-id -i .ssh/id_rsa.pub root@node1
ssh-copy-id -i .ssh/id_rsa.pub root@node2

7.创建安装目录（三台机器同时执行）：

mkdir -p /k8s/etcd/{bin,cfg,ssl} 
mkdir -p /k8s/kubernetes/{bin,cfg,ssl}

8.安装包的下载链接：

Client Binaries
https://dl.k8s.io/v1.13.1/kubernetes-client-linux-amd64.tar.gz
Server Binaries
https://dl.k8s.io/v1.13.1/kubernetes-server-linux-amd64.tar.gz
Node Binaries
https://dl.k8s.io/v1.13.1/kubernetes-node-linux-amd64.tar.gz
etcd
https://github.com/etcd-io/etcd/releases/download/v3.3.10/etcd-v3.3.10-linux-amd64.tar.gz
flannel
https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz

#百度网盘下载安装包
#地址：
https://pan.baidu.com/s/1wO6T7byhaJYBuu2JlhZvkQ
#密码：
pm9u

安装kubernetes：

1.安装wget：
yum -y install wget
2.安装及配置CFSSL（在master节点执行然后进行拷贝）：
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo

3.创建认证证书:

  • 创建 ETCD 证书
cat << EOF | tee ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "www": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}
EOF
  • 创建 ETCD CA 配置文件
cat << EOF | tee ca-csr.json
{
    "CN": "etcd CA",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen"
        }
    ]
}
EOF
  • 创建 ETCD Server 证书
cat << EOF | tee server-csr.json
{
    "CN": "etcd",
    "hosts": [
    "192.168.8.22",
    "192.168.8.23",
    "192.168.8.24"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen"
        }
    ]
}
EOF
  • 生成 ETCD CA 证书和私钥
cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server
  • 创建 Kubernetes CA 证书
cat << EOF | tee ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}
EOF

cat << EOF | tee ca-csr.json
{
    "CN": "kubernetes",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen",
            "O": "k8s",
            "OU": "System"
        }
    ]
}
EOF

cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
  • 生成API_SERVER证书
cat << EOF | tee server-csr.json
{
    "CN": "kubernetes",
    "hosts": [
      "10.0.0.1",
      "127.0.0.1",
      "192.168.8.22",
      "kubernetes",
      "kubernetes.default",
      "kubernetes.default.svc",
      "kubernetes.default.svc.cluster",
      "kubernetes.default.svc.cluster.local"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen",
            "O": "k8s",
            "OU": "System"
        }
    ]
}
EOF

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes server-csr.json | cfssljson -bare server
  • 创建 Kubernetes Proxy 证书
cat << EOF | tee kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "L": "Shenzhen",
      "ST": "Shenzhen",
      "O": "k8s",
      "OU": "System"
    }
  ]
}
EOF

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
3.部署ETCD
  • 解压安装文件
tar -xvf etcd-v3.3.10-linux-amd64.tar.gz
cd etcd-v3.3.10-linux-amd64/
cp etcd etcdctl /k8s/etcd/bin/
  • 创建etcd配置文件
vim /k8s/etcd/cfg/etcd   

#[Member]
ETCD_NAME="etcd01"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.8.22:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.8.22:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.8.22:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.8.22:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.8.22:2380,etcd02=https://192.168.8.23:2380,etcd03=https://192.168.8.24:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
  • 创建 etcd的 systemd unit 文件
vim /usr/lib/systemd/system/etcd.service 

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/k8s/etcd/cfg/etcd
ExecStart=/k8s/etcd/bin/etcd \
--name=${ETCD_NAME} \
--data-dir=${ETCD_DATA_DIR} \
--listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \
--listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \
--advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \
--initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \
--initial-cluster=${ETCD_INITIAL_CLUSTER} \
--initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} \
--initial-cluster-state=new \
--cert-file=/k8s/etcd/ssl/server.pem \
--key-file=/k8s/etcd/ssl/server-key.pem \
--peer-cert-file=/k8s/etcd/ssl/server.pem \
--peer-key-file=/k8s/etcd/ssl/server-key.pem \
--trusted-ca-file=/k8s/etcd/ssl/ca.pem \
--peer-trusted-ca-file=/k8s/etcd/ssl/ca.pem
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
  • 拷贝证书文件
cp ca*pem server*pem /k8s/etcd/ssl
  • 启动ETCD服务
systemctl daemon-reload
systemctl enable etcd
systemctl start etcd
  • 将启动文件、配置文件拷贝到 节点1、节点2
cd /k8s/ 
scp -r etcd node1:/k8s/
scp -r etcd node2:/k8s/
scp /usr/lib/systemd/system/etcd.service  node1:/usr/lib/systemd/system/etcd.service
scp /usr/lib/systemd/system/etcd.service  node2:/usr/lib/systemd/system/etcd.service 

#在node1上面操作
vim /k8s/etcd/cfg/etcd 
#[Member]
ETCD_NAME="etcd02"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.8.23:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.8.23:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.8.23:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.8.23:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.8.22:2380,etcd02=https://192.168.8.23:2380,etcd03=https://192.168.8.24:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

#在node2上面操作
vim /k8s/etcd/cfg/etcd

#[Member]
ETCD_NAME="etcd03"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.8.24:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.8.24:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.8.24:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.8.24:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.8.22:2380,etcd02=https://192.168.8.23:2380,etcd03=https://192.168.8.24:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
  • 验证集群是否正常运行（在master上操作）
./etcdctl \
--ca-file=/k8s/etcd/ssl/ca.pem \
--cert-file=/k8s/etcd/ssl/server.pem \
--key-file=/k8s/etcd/ssl/server-key.pem \
--endpoints="https://192.168.8.22:2379,\
https://192.168.8.23:2379,\
https://192.168.8.24:2379" cluster-health


member 1f8487ed3c45c380 is healthy: got healthy result from https://192.168.8.24:2379
member 436741d3c44540b2 is healthy: got healthy result from https://192.168.8.22:2379
member ad1fe97d38022a78 is healthy: got healthy result from https://192.168.8.23:2379
cluster is healthy

#注意：启动节点失败将/var/lib/etcd的东西删掉
#启动ETCD集群同时启动二个节点，启动一个节点集群是无法正常启动的；
4.部署Flannel网络
  • 向 etcd 写入集群 Pod 网段信息
cd /k8s/etcd/ssl/
/k8s/etcd/bin/etcdctl \
--ca-file=ca.pem --cert-file=server.pem \
--key-file=server-key.pem \
--endpoints="https://192.168.8.22:2379,\
https://192.168.8.23:2379,https://192.168.8.24:2379" \
set /coreos.com/network/config  '{ "Network": "172.18.0.0/16", "Backend": {"Type": "vxlan"}}'
  • 解压安装flannel
tar -zxvf flannel-v0.10.0-linux-amd64.tar.gz
mv flanneld mk-docker-opts.sh /k8s/kubernetes/bin/
  • 配置Flannel
vim /k8s/kubernetes/cfg/flanneld

FLANNEL_OPTIONS="--etcd-endpoints=https://192.168.8.22:2379,https://192.168.8.23:2379,https://192.168.8.24:2379 -etcd-cafile=/k8s/etcd/ssl/ca.pem -etcd-certfile=/k8s/etcd/ssl/server.pem -etcd-keyfile=/k8s/etcd/ssl/server-key.pem"
  • 创建 flanneld 的 systemd unit 文件
vim /usr/lib/systemd/system/flanneld.service

[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service

[Service]
Type=notify
EnvironmentFile=/k8s/kubernetes/cfg/flanneld
ExecStart=/k8s/kubernetes/bin/flanneld --ip-masq $FLANNEL_OPTIONS
ExecStartPost=/k8s/kubernetes/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure

[Install]
WantedBy=multi-user.target
  • mk-docker-opts.sh 脚本将分配给 flanneld 的 Pod 子网网段信息写入 /run/flannel/docker 文件，后续 docker 启动时 使用这个文件中的环境变量配置 docker0 网桥；
  • flanneld 使用系统缺省路由所在的接口与其它节点通信，对于有多个网络接口（如内网和公网）的节点，可以用 -iface 参数指定通信接口，如上面的 eth0 接口;
  • flanneld 运行时需要 root 权限；
  • 配置Docker启动指定子网段
vim /usr/lib/systemd/system/docker.service 
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target
  • 将flanneld systemd unit 文件到所有节点
cd /k8s/
scp -r kubernetes node1:/k8s/
scp -r kubernetes node2:/k8s/
scp /k8s/kubernetes/cfg/flanneld node1:/k8s/kubernetes/cfg/flanneld
scp /k8s/kubernetes/cfg/flanneld node2:/k8s/kubernetes/cfg/flanneld
scp /usr/lib/systemd/system/docker.service  node1:/usr/lib/systemd/system/docker.service 
scp /usr/lib/systemd/system/docker.service  node2:/usr/lib/systemd/system/docker.service
scp /usr/lib/systemd/system/flanneld.service  node1:/usr/lib/systemd/system/flanneld.service 
scp /usr/lib/systemd/system/flanneld.service node2:/usr/lib/systemd/system/flanneld.service 

#启动服务（三个节点同时执行）
systemctl daemon-reload
systemctl start flanneld
systemctl enable flanneld
systemctl restart docker
5.部署 master 节点（kube-apiserver，kube-scheduler，kube-controller-manager）
  • 将二进制文件解压拷贝到master 节点
tar -zxvf kubernetes-server-linux-amd64.tar.gz 
cd kubernetes/server/bin/
cp kube-scheduler kube-apiserver kube-controller-manager kubectl /k8s/kubernetes/bin/
  • 拷贝认证
cp *pem /k8s/kubernetes/ssl/
部署 kube-apiserver 组件
  • 创建 TLS Bootstrapping Token
head -c 16 /dev/urandom | od -An -t x | tr -d ' '
8d38ad6d7df6b109901bac9d07aaaefe

vim /k8s/kubernetes/cfg/token.csv
8d38ad6d7df6b109901bac9d07aaaefe,kubelet-bootstrap,10001,"system:kubelet-bootstrap"
  • 创建apiserver配置文件
vim /k8s/kubernetes/cfg/kube-apiserver 

KUBE_APISERVER_OPTS="--logtostderr=true \
--v=4 \
--etcd-servers=https://192.168.8.22:2379,https://192.168.8.23:2379,https://192.168.8.24:2379 \
--bind-address=192.168.8.22 \
--secure-port=6443 \
--advertise-address=192.168.8.22 \
--allow-privileged=true \
--service-cluster-ip-range=10.0.0.0/24 \
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota,NodeRestriction \
--authorization-mode=RBAC,Node \
--enable-bootstrap-token-auth \
--token-auth-file=/k8s/kubernetes/cfg/token.csv \
--service-node-port-range=30000-50000 \
--tls-cert-file=/k8s/kubernetes/ssl/server.pem  \
--tls-private-key-file=/k8s/kubernetes/ssl/server-key.pem \
--client-ca-file=/k8s/kubernetes/ssl/ca.pem \
--service-account-key-file=/k8s/kubernetes/ssl/ca-key.pem \
--etcd-cafile=/k8s/etcd/ssl/ca.pem \
--etcd-certfile=/k8s/etcd/ssl/server.pem \
--etcd-keyfile=/k8s/etcd/ssl/server-key.pem"

#脚本
#启动脚本命令：
#bash apiserver.sh  192.168.8.22 https://192.168.8.22:2379,https://192.168.8.23:2379,https://192.168.8.24:2379
#!/bin/bash

MASTER_ADDRESS=${1:-"192.168.1.195"}
ETCD_SERVERS=${2:-"http://127.0.0.1:2379"}

cat <<EOF >/opt/kubernetes/cfg/kube-apiserver

KUBE_APISERVER_OPTS="--logtostderr=true \\
--v=4 \\
--etcd-servers=${ETCD_SERVERS} \\
--insecure-bind-address=127.0.0.1 \\
--bind-address=${MASTER_ADDRESS} \\
--insecure-port=8080 \\
--secure-port=6443 \\
--advertise-address=${MASTER_ADDRESS} \\
--allow-privileged=true \\
--service-cluster-ip-range=10.10.10.0/24 \\
--admission-control=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota,NodeRestriction \
--authorization-mode=RBAC,Node \\
--kubelet-https=true \\
--enable-bootstrap-token-auth \\
--token-auth-file=/opt/kubernetes/cfg/token.csv \\
--service-node-port-range=30000-50000 \\
--tls-cert-file=/opt/kubernetes/ssl/server.pem  \\
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \\
--client-ca-file=/opt/kubernetes/ssl/ca.pem \\
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--etcd-cafile=/opt/kubernetes/ssl/ca.pem \\
--etcd-certfile=/opt/kubernetes/ssl/server.pem \\
--etcd-keyfile=/opt/kubernetes/ssl/server-key.pem"

EOF

cat <<EOF >/usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-apiserver
ExecStart=/opt/kubernetes/bin/kube-apiserver \$KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl restart kube-apiserver
  • 创建 kube-apiserver systemd unit 文件
vim /usr/lib/systemd/system/kube-apiserver.service 

[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-apiserver
ExecStart=/k8s/kubernetes/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
  • 启动服务
systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
  • 查看apiserver是否运行
ps -ef |grep kube-apiserver
部署kube-scheduler
  • 创建kube-scheduler配置文件
vim  /k8s/kubernetes/cfg/kube-scheduler 

KUBE_SCHEDULER_OPTS="--logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect"
  • –address：在 127.0.0.1:10251 端口接收 http /metrics 请求；kube-scheduler 目前还不支持接收 https 请求；
  • –kubeconfig：指定 kubeconfig 文件路径，kube-scheduler 使用它连接和验证 kube-apiserver；
  • –leader-elect=true：集群运行模式，启用选举功能；被选为 leader 的节点负责处理工作，其它节点为阻塞状态；
  • 创建kube-scheduler systemd unit 文件
vim /usr/lib/systemd/system/kube-scheduler.service 

[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-scheduler
ExecStart=/k8s/kubernetes/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
  • 启动服务
systemctl daemon-reload
systemctl enable kube-scheduler.service 
systemctl start kube-scheduler.service
  • 查看kube-scheduler是否运行
ps -ef |grep kube-scheduler
部署kube-controller-manager
  • 创建kube-controller-manager配置文件
vim /k8s/kubernetes/cfg/kube-controller-manager

KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=true \
--v=4 \
--master=127.0.0.1:8080 \
--leader-elect=true \
--address=127.0.0.1 \
--service-cluster-ip-range=10.0.0.0/24 \
--cluster-name=kubernetes \
--cluster-signing-cert-file=/k8s/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/k8s/kubernetes/ssl/ca-key.pem  \
--root-ca-file=/k8s/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/k8s/kubernetes/ssl/ca-key.pem"
  • 创建kube-controller-manager systemd unit 文件
vim /usr/lib/systemd/system/kube-controller-manager.service 

[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-controller-manager
ExecStart=/k8s/kubernetes/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
  • 启动服务
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl restart kube-controller-manager
  • 查看kube-controller-manager是否启动
systemctl status kube-controller-manager
  • 将可执行文件路/k8s/kubernetes/ 添加到 PATH 变量中
vim /etc/profile
PATH=/k8s/kubernetes/bin:$PATH:$HOME/bin
source /etc/profile
  • 查看master集群状态
kubectl get cs,nodes

NAME                                 STATUS    MESSAGE             ERROR
componentstatus/controller-manager   Healthy   ok                  
componentstatus/scheduler            Healthy   ok                  
componentstatus/etcd-0               Healthy   {"health":"true"}   
componentstatus/etcd-1               Healthy   {"health":"true"}   
componentstatus/etcd-2               Healthy   {"health":"true"}
6.部署node 节点(kubelet,kube-proxy)
  • ublet 运行在每个 worker 节点上，接收 kube-apiserver 发送的请求，管理 Pod 容器，执行交互式命令，如exec、run、logs 等;
  • kublet 启动时自动向 kube-apiserver 注册节点信息，内置的 cadvisor 统计和监控节点的资源使用情况;
  • 为确保安全，本文档只开启接收 https 请求的安全端口，对请求进行认证和授权，拒绝未授权的访问(如apiserver、heapster)。
  • 将kubelet 二进制文件拷贝node节点
#在master节点上执行
cp kubelet kube-proxy /k8s/kubernetes/bin/
scp kubelet kube-proxy 192.168.8.23:/k8s/kubernetes/bin/
scp kubelet kube-proxy 192.168.8.24:/k8s/kubernetes/bin/
  • 创建 kubelet bootstrap kubeconfig 文件
#在master节点上执行
#注：将ca.pem，environment.sh，kube-proxy-key.pem，kube-proxy.pem四个文件放到一个目录下
vim  environment.sh
# 创建kubelet bootstrapping kubeconfig 
BOOTSTRAP_TOKEN=8d38ad6d7df6b109901bac9d07aaaefe
KUBE_APISERVER="https://192.168.8.22:6443"
# 设置集群参数
kubectl config set-cluster kubernetes \
  --certificate-authority=./ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=bootstrap.kubeconfig

# 设置客户端认证参数
kubectl config set-credentials kubelet-bootstrap \
  --token=${BOOTSTRAP_TOKEN} \
  --kubeconfig=bootstrap.kubeconfig

# 设置上下文参数
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kubelet-bootstrap \
  --kubeconfig=bootstrap.kubeconfig

# 设置默认上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig

#----------------------

# 创建kube-proxy kubeconfig文件

kubectl config set-cluster kubernetes \
  --certificate-authority=./ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-credentials kube-proxy \
  --client-certificate=./kube-proxy.pem \
  --client-key=./kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
  • 将bootstrap kubeconfig和kube-proxy.kubeconfig 文件拷贝到所有 nodes节点
cp bootstrap.kubeconfig kube-proxy.kubeconfig /k8s/kubernetes/cfg/
scp bootstrap.kubeconfig kube-proxy.kubeconfig 192.168.8.23:/k8s/kubernetes/cfg/
scp bootstrap.kubeconfig kube-proxy.kubeconfig 192.168.8.24:/k8s/kubernetes/cfg/
  • 创建kubelet 参数配置文件拷贝到所有 nodes节点
#在master上操作
vim /k8s/kubernetes/cfg/kubelet.config

kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 192.168.8.22
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS: ["10.0.0.2"]
clusterDomain: cluster.local.
failSwapOn: false
authentication:
  anonymous:
    enabled: true
    

#将参数配置文件拷贝到其他节点并且ip需要改成自己的ip
scp /k8s/kubernetes/cfg/kubelet.config node1:/k8s/kubernetes/cfg/
scp /k8s/kubernetes/cfg/kubelet.config node2:/k8s/kubernetes/cfg/
  • 创建kubelet配置文件
#在master上操作
vim /k8s/kubernetes/cfg/kubelet

KUBELET_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.8.22 \
--kubeconfig=/k8s/kubernetes/cfg/kubelet.kubeconfig \
--bootstrap-kubeconfig=/k8s/kubernetes/cfg/bootstrap.kubeconfig \
--config=/k8s/kubernetes/cfg/kubelet.config \
--cert-dir=/k8s/kubernetes/ssl \
--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0"

#将文件拷贝到其他节点上并修改对应的ip
scp /k8s/kubernetes/cfg/kubelet node1:/k8s/kubernetes/cfg/kubelet
scp /k8s/kubernetes/cfg/kubelet node2:/k8s/kubernetes/cfg/kubelet
  • 创建kubelet systemd unit 文件
#在master上操作
vim /usr/lib/systemd/system/kubelet.service 

[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service

[Service]
EnvironmentFile=/k8s/kubernetes/cfg/kubelet
ExecStart=/k8s/kubernetes/bin/kubelet $KUBELET_OPTS
Restart=on-failure
KillMode=process

[Install]
WantedBy=multi-user.target

#将文件拷贝到其他节点上
scp /usr/lib/systemd/system/kubelet.service node1:/usr/lib/systemd/system/kubelet.service
scp /usr/lib/systemd/system/kubelet.service node2:/usr/lib/systemd/system/kubelet.service
  • 将kubelet-bootstrap用户绑定到系统集群角色
#master节点上执行
kubectl create clusterrolebinding kubelet-bootstrap \
  --clusterrole=system:node-bootstrapper \
  --user=kubelet-bootstrap
  
  
 clusterrolebinding.rbac.authorization.k8s.io/kubelet-bootstrap created
  • 启动服务
#在两个节点上执行
systemctl daemon-reload
systemctl enable kubelet
systemctl restart kubelet
  • 查看 CSR 列表
kubectl get csr

NAME                                                   AGE   REQUESTOR           CONDITION
node-csr-HjaojHavfm-vFzime9FfPUB4rNCuBAgUiUR8GrjaKeM   10m   kubelet-bootstrap   Pending
node-csr-bfl0GRKg5hWleaClBFAcXVvNOvNhRUJ0f11J3vNN9rY   10m   kubelet-bootstrap   Pending
  • 手动 approve CSR 请求
kubectl certificate approve node-csr-HjaojHavfm-vFzime9FfPUB4rNCuBAgUiUR8GrjaKeM
kubectl certificate approve node-csr-bfl0GRKg5hWleaClBFAcXVvNOvNhRUJ0f11J3vNN9rY
  • 查看集群状态
kubectl get nodes
部署kebu-proxy
  • 创建 kube-proxy文件
vim /k8s/kubernetes/cfg/kube-proxy
KUBE_PROXY_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.8.22 \
--cluster-cidr=10.0.0.0/24 \
--kubeconfig=/k8s/kubernetes/cfg/kube-proxy.kubeconfig"

#文件拷贝并且ip要改成自己的ip
scp /k8s/kubernetes/cfg/kube-proxy node1:/k8s/kubernetes/cfg/
scp /k8s/kubernetes/cfg/kube-proxy node2:/k8s/kubernetes/cfg/
  • 创建kube-proxy systemd unit 文件
vim /usr/lib/systemd/system/kube-proxy.service 

[Unit]
Description=Kubernetes Proxy
After=network.target

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-proxy
ExecStart=/k8s/kubernetes/bin/kube-proxy $KUBE_PROXY_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target


#文件拷贝
scp /usr/lib/systemd/system/kube-proxy.service node1:/usr/lib/systemd/system/
scp /usr/lib/systemd/system/kube-proxy.service node2:/usr/lib/systemd/system/
  • 启动服务
systemctl daemon-reload
systemctl enable kube-proxy
systemctl restart kube-proxy
  • 打node 或者master 节点的标签
kubectl label node 192.168.8.22  node-role.kubernetes.io/master='master'
kubectl label node 192.168.8.23  node-role.kubernetes.io/node='node'
kubectl label node 192.168.8.24  node-role.kubernetes.io/node='node'
  • 最终效果

posted on 2020-08-12 22:33  雾老师  阅读(722)  评论(0)    收藏  举报