network,telnet,protocol,wiki
Telnet is a network protocol used on the Internet or local area networks to provide a bidirectional interactive text-oriented communication facility using a virtual terminal connection. User data is interspersed in-band with Telnet control information in an 8-bit byte oriented data connection over the Transmission Control Protocol (TCP).
Telnet was developed in 1969 beginning with RFC 15, extended in RFC 854, and standardized as Internet Engineering Task Force (IETF) Internet Standard STD 8, one of the first Internet standards.
Historically, Telnet provided access to a command-line interface (usually, of an operating system) on a remote host. Most network equipment and operating systems with a TCP/IP stack support a Telnet service for remote configuration (including systems based on Windows NT). However, because of serious security issues when using Telnet over an open network such as the Internet, its use for this purpose has waned significantly[citation needed] in favor of SSH.
The term telnet may also refer to the software that implements the client part of the protocol. Telnet client applications are available for virtually all computer platforms. Telnet is also used as a verb. To telnet means to establish a connection with the Telnet protocol, either with command line client or with a programmatic interface. For example, a common directive might be: "To change your password, telnet to the server, log in and run the passwd command." Most often, a user will betelnetting to a Unix-like server system or a network device (such as a router) and obtain a login prompt to a command line text interface or a character-based full-screen manager.
| Internet protocol suite |
|---|
| Application layer |
| Transport layer |
| Internet layer |
| Link layer |
Contents
[hide]History and standards
Telnet is a client-server protocol, based on a reliable connection-orientedtransport. Typically this protocol is used to establish a connection to Transmission Control Protocol (TCP) port number 23, where a Telnet server application (telnetd) is listening. Telnet, however, predates TCP/IP and was originally run over Network Control Program (NCP) protocols.
Before March 5, 1973, Telnet was an ad hoc protocol with no official definition.[1]Essentially, it used an 8-bit channel to exchange 7-bit ASCII data. Any byte with the high bit set was a special Telnet character. On March 5, 1973, a Telnet protocol standard was defined at UCLA[2] with the publication of two NIC documents: Telnet Protocol Specification, NIC #15372, and Telnet Option Specifications, NIC #15373.
Because of negotiable options protocol architecture, many extensions were made for it, some of which have been adopted asInternet standards, IETF documents STD 27 through STD 32. Some extensions have been widely implemented and others are proposed standards on the IETF standards track (see below)
Security
 |
This section does not cite any references or sources. (April 2010) |
When Telnet was initially developed in 1969, most users of networked computers were in the computer departments of academic institutions, or at large private and government research facilities. In this environment, security was not nearly as much a concern as it became after the bandwidth explosion of the 1990s. The rise in the number of people with access to the Internet, and by extension the number of people attempting to hack other people's servers, made encrypted alternatives much more necessary.
Experts in computer security, such as SANS Institute, recommend that the use of Telnet for remote logins should be discontinued under all normal circumstances, for the following reasons:
- Telnet, by default, does not encrypt any data sent over the connection (including passwords), and so it is often practical to eavesdrop on the communications and use the password later for malicious purposes; anybody who has access to a router,switch, hub or gateway located on the network between the two hosts where Telnet is being used can intercept the packets passing by and obtain login, password and whatever else is typed with a packet analyzer.
- Most implementations of Telnet have no authentication that would ensure communication is carried out between the two desired hosts and not intercepted in the middle.
- Several vulnerabilities have been discovered over the years in commonly used Telnet daemons.
These security-related shortcomings have seen the usage of the Telnet protocol drop rapidly[citation needed], especially on the public Internet, in favor of the Secure Shell (SSH) protocol, first released in 1995. SSH provides much of the functionality of telnet, with the addition of strong encryption to prevent sensitive data such as passwords from being intercepted, andpublic key authentication, to ensure that the remote computer is actually who it claims to be. As has happened with other early Internet protocols, extensions to the Telnet protocol provide Transport Layer Security (TLS) security and Simple Authentication and Security Layer (SASL) authentication that address the above issues. However, most Telnet implementations do not support these extensions; and there has been relatively little interest in implementing these as SSH is adequate for most purposes.
Telnet 5250
IBM 5250 or 3270 workstation emulation is supported via custom telnet clients, TN5250/TN3270, and IBM servers. Clients and servers designed to pass IBM 5250 data streams over Telnet generally do support SSL encryption, as SSH does not include 5250 emulation. Under OS/400, port 992 is the default port for secured telnet.[citation needed]
Telnet data
All data octets except \377 are transmitted over the TCP transport as is. Therefore, a Telnet client application may also be used to establish an interactive raw TCP session, and it is commonly believed that such session which does not use the IAC (\377 character, or 255 in decimal) is functionally identical.[citation needed] This is not the case, however, because there are other network virtual terminal (NVT) rules, such as the requirement for a bare carriage return character (CR, ASCII 13) to be followed by a NULL (ASCII 0) character, that distinguish the telnet protocol from raw TCP sessions.[clarification needed]On the other hand, many systems now possess true raw TCP clients, such as netcat or socat on UNIX and PuTTY on Windows, which also can be used to manually "talk" to other services without specialized client software. Nevertheless, Telnet is still sometimes used in debugging network services such as SMTP, IRC, HTTP, FTP or POP3 servers, to issue commands to a server and examine the responses, but of all these protocols only FTP really uses Telnet data format.
Another difference of Telnet from a raw TCP session is that Telnet is not 8-bit clean by default. 8-bit mode may be negotiated, but high-bit-set octets may be garbled until this mode was requested, and it obviously will not be requested in non-Telnet connection. The 8-bit mode (so named binary option) is intended to transmit binary data, not characters though. The standard suggests the interpretation of codes \000–\176 as ASCII, but does not offer any meaning for high-bit-set dataoctets. There was an attempt to introduce a switchable character encoding support like HTTP has,[3] but nothing is known about its actual software support.
Current status
|
|
This section does not cite any references or sources. (January 2013) |
As of mid-2010, the Telnet protocol itself has been mostly superseded for remote login. Telnet is still popular in various application areas:
- Enterprise networks to access host applications, e.g., on IBM Mainframes.
- Administration of network elements, e.g., in configuring routers on a home network, in commissioning, integration and maintenance of core network elements in mobile communication networks, and many industrial control systems.
- MUD games played over the Internet, as well as talkers, MUSHes, MUCKs and MOOs.
- Connection to Bulletin Board Systems.
- Internet game clubs, like the Internet Chess Club, the Free Internet Chess Server and the Internet Go server.
- Connection to Amateur Radio DX clusters.
- Embedded systems.
- Mobile data collection applications where telnet runs over secure networks
- Troubleshooting and testing of basic TCP functionality between IP endpoints, often as a response to editing firewall rules, initial endpoint configuration, or partial connectivity loss.
