Linux下清理内存和Cache方法见下文:

暂时目前的环境处理方法比较简单:

在root用户下添加计划任务:

*/10 * * * * sync;echo 3 > /proc/sys/vm/drop_caches;     

每十分钟执行一次,先将脏数据写回硬盘,之后释放缓存页和入口信息和节点信息等;

-------------------参考链接:

http://man.linuxde.net/sync

https://www.linuxidc.com/Linux/2010-03/24939.htm

sync命令

 

sync命令用于强制被改变的内容立刻写入磁盘,更新超块信息。

在Linux/Unix系统中,在文件或数据处理过程中一般先放到内存缓冲区中,等到适当的时候再写入磁盘,以提高系统的运行效率。sync命令则可用来强制将内存缓冲区中的数据立即写入磁盘中。用户通常不需执行sync命令,系统会自动执行update或bdflush操作,将缓冲区的数据写 入磁盘。只有在update或bdflush无法执行或用户需要非正常关机时,才需手动执行sync命令。

语法

sync(选项)

选项

--help:显示帮助;
 --version:显示版本信息。

buffer与cache

  • buffer:为了解决写磁盘的效率
  • cache:为了解决读磁盘的效率

linux系统为了提高读写磁盘的效率,会先将数据放在一块buffer中。在写磁盘时并不是立即将数据写到磁盘中,而是先写入这块buffer中了。此时如果重启系统,就可能造成数据丢失。

sync命令用来flush文件系统buffer,这样数据才会真正的写到磁盘中,并且buffer才能够释放出来,flush就是用来清空buffer。sync命令会强制将数据写入磁盘中,并释放该数据对应的buffer,所以常常会在写磁盘后输入sync命令来将数据真正的写入磁盘。

如果不去手动的输入sync命令来真正的去写磁盘,linux系统也会周期性的去sync数据。

----------------------

 

Linux下清理内存和Cache方法 /proc/sys/vm/drop_caches


Linux下清理内存和Cache方法 /proc/sys/vm/drop_caches
 

频繁的文件访问会导致系统的Cache使用量大增

$ free -m
total used free shared buffers cached
Mem: 3955 3926 28 0 55 3459
-/+ buffers/cache: 411 3544
Swap: 5726 0 5726

free内存减少到几十兆,系统运行缓慢

运行sync将dirty的内容写回硬盘
$sync

通过修改proc系统的drop_caches清理free的cache
$echo 3 > /proc/sys/vm/drop_caches

drop_caches的详细文档如下:
Writing to this will cause the kernel to drop clean caches, dentries and inodes from memory, causing that memory to become free.
To free pagecache:
* echo 1 > /proc/sys/vm/drop_caches
To free dentries and inodes:
* echo 2 > /proc/sys/vm/drop_caches
To free pagecache, dentries and inodes:
* echo 3 > /proc/sys/vm/drop_caches
As this is a non-destructive operation, and dirty objects are notfreeable, the user should run "sync" first in order to make sure allcached objects are freed.
This tunable was added in 2.6.16.

修改/etc/sysctl.conf 添加如下选项后就不会内存持续增加
vm.dirty_ratio = 1
vm.dirty_background_ratio=1
vm.dirty_writeback_centisecs=2
vm.dirty_expire_centisecs=3
vm.drop_caches=3
vm.swappiness =100
vm.vfs_cache_pressure=163
vm.overcommit_memory=2
vm.lowmem_reserve_ratio=32 32 8
kern.maxvnodes=3

上面的设置比较粗暴,使cache的作用基本无法发挥。需要根据机器的状况进行适当的调节寻找最佳的折衷。

posted @ 2018-04-11 20:45  the_tops  阅读(1200)  评论(0编辑  收藏  举报