ABAP-字符串常用处理方法

字符串处理

SPLIT dobj AT sep INTO { {result1 result2 ...} | {TABLE result_tab} }

必须指定足够目标字段。否则，用字段dobj的剩余部分填充最后目标字段并包含分界符；或者使用内表动态接收

DATA: L_STR  TYPE STRING,
      L_STR1 TYPE C,
      L_STR2 TYPE C.

DATA: BEGIN OF LT_STR OCCURS 0,
        STR TYPE C,
      END OF LT_STR.
      
L_STR = '1/2'.
SPLIT L_STR AT '/' INTO L_STR1 L_STR2.  "根据‘/’截断字符创 L_STR 放于L_STR1、L_STR2
WRITE: L_STR1,L_STR2,/.

SPLIT L_STR AT '/' INTO TABLE LT_STR.  "根据‘/’截断字符创 L_STR 放于表LT_STR
LOOP AT LT_STR.
  WRITE: LT_STR-STR,/.
ENDLOOP.

SHIFT dobj { [ {BY num PLACES} | { UP TO sub_string } ] [ [ LEFT|RIGHT ] [ CIRCULAR ] ] }

| { { LEFT DELETING LEADING } | { RIGHT DELETING LEADING } } pattern

对于固定长度字符串类型，shift产生的空位会使用空格或十六进制的0（如果为X类型串时）来填充

向右移动时前面会补空格，固定长度类型字符串与String结果是不一样：String类型右移后不会被截断，只是字串前面补相应数量的空格，但如果是C类型时，则会截断；左移后后面是否被空格要看是否是固定长度类型的字符串还是变长的String类型串，左移后C类型会补空格，String类型串不会（会缩短）

CIRCULAR：将移出的字符串放在左边或者左边

pattern：只要前导或尾部字符在指定的pattern字符集里就会被去掉，直到第一个不在模式pattern的字符止

DATA(STR) = `0123456789`.
SHIFT STR.		"打印出 123456789	

DATA: TEXT TYPE STRING VALUE 'I know  you know',
      OFF  TYPE I.
FIND 'you' IN TEXT MATCH OFFSET OFF.
SHIFT TEXT BY OFF PLACES.	"从 ‘you’ 的地方截断字符串TEXT，保留'you' 和之后的字符串 you know
*SHIFT TEXT UP TO 'you'.	"从 ‘you’ 的地方截断字符串TEXT，保留'you' 和之后的字符串 you know	

DATA(TEXT) = '0123456789'.
*SHIFT TEXT RIGHT.	"从右边截断第一个字符		012345678	
SHIFT TEXT LEFT.	"从左边截断第一个字符		123456789

SHIFT TEXT UP TO 'you' LEFT CIRCULAR.	"打印出来是 ‘you know I know’
SHIFT TEXT UP TO 'you' RIGHT CIRCULAR.  "打印出来是 ‘know I know you’

DATA(xstr) = CONV xstring( `AABBCCDDEEFF` ). 
SHIFT xstr IN BYTE MODE. 	"打印出来 BBCCDDEEFF

DATA TEXT TYPE STRING VALUE `I know you know `.
SHIFT TEXT RIGHT DELETING TRAILING 'no kw'.   "I know you

DATA TXT TYPE STRING VALUE '0000011111'.
SHIFT TXT RIGHT DELETING TRAILING '1'.   "00000
SHIFT TXT LEFT  DELETING LEADING  '0'.   "11111

CONDENSE [NO-GAPS].

如果是C类型只去掉前面的空格（因为是定长，即使后面空格去掉了，左对齐时后面会补上空格），如果是String类型，则后面空格也会被去掉；

字符串中间的多个连续的空格使用一个空格替换(String类型也是这样)；

NO-GAPS：字符串中间的所有空格都也都会去除(String类型也是这样)；空格去掉后会左对齐

DATA: BEGIN OF SENTENCE,
        WORD1 TYPE C LENGTH 30 VALUE 'She',
        WORD2 TYPE C LENGTH 30 VALUE 'feeds',
        WORD3 TYPE C LENGTH 30 VALUE 'you',
        WORD4 TYPE C LENGTH 30 VALUE 'tea',
        WORD5 TYPE C LENGTH 30 VALUE 'and',
        WORD6 TYPE C LENGTH 30 VALUE 'oranges',
      END OF SENTENCE,
      TEXT TYPE STRING.
TEXT = SENTENCE.
CONDENSE TEXT.	" She feeds you tea and oranges
CONDENSE TEXT NO-GAPS.	"Shefeedsyouteaandoranges

CONCATENATE { dobj1 dobj2 ...} | { LINES OF itab } INTO result [SEPARATED BY sep] [RESPECTING BLANKS].

C、D、N、T类型的前导空格会保留，尾部空格都会被去掉，但对String类型所有空格都会保留；对于C、D、N、T类型的字符串有一个RESPECTING BLANKS选项可使用，表示尾部空格也会保留。注：使用 `` 对String类型进行赋值时才会保留尾部空格
```
TYPES HEX TYPE X LENGTH 1.
DATA ITAB TYPE TABLE OF HEX WITH EMPTY KEY.

ITAB = VALUE #(
( CONV HEX( '48' ) )
( CONV HEX( '65' ) )
( CONV HEX( '6C' ) )
( CONV HEX( '6C' ) )
( CONV HEX( '6F' ) ) ).

CONCATENATE LINES OF ITAB INTO DATA(XSTR) IN BYTE MODE.	"48656C6C6F
```

strlen(arg)、Xstrlen(arg)

String类型的尾部空格会计入字符个数中，但C类型的变量尾部空格不会计算入

DATA: STR TYPE STRING      VALUE `12345     `,
      TXT TYPE C LENGTH 10 VALUE '12345     ',
      LEN TYPE I.

LEN = STRLEN( STR ).		"10
LEN = STRLEN( TXT ).		"5

substring( val = TEXT [off = off] [len = len] )

DATA  RESULT TYPE STRING.
RESULT = SUBSTRING( VAL = 'ABCDEFGH' OFF = 2 LEN = 2 ).		"CD
RESULT = SUBSTRING_FROM( VAL = 'ABCDEFGH' SUB = 'CD' ).		"CDEFGH
RESULT = SUBSTRING_AFTER( VAL = 'ABCDEFGH' SUB = 'CD' ).	"EFGH
RESULT = SUBSTRING_BEFORE( VAL = 'ABCDEFGH' SUB = 'CD' ).	"AB
RESULT = SUBSTRING_TO( VAL = 'ABCDEFGH' SUB = 'CD' ).		"ABCD

count( val = TEXT {sub = substring}|{regex = regex} )

匹配指定字符串substring或正则式regex出现的子串次数，返回的类型为i整型类型

DATA(RESULT1) = COUNT(            VAL = `xxx123yyy` REGEX = `\d+` ).	"1
DATA(RESULT2) = COUNT_ANY_OF(     VAL = `xxx123yyy` SUB   = `123` ).	"3
DATA(RESULT3) = COUNT_ANY_NOT_OF( VAL = `xxx123yyy` SUB   = `x`   ).	"6

match( val = TEXT REGEX = REGEX occ = occ)

返回的为匹配到的字符串。注：每次只匹配一个。

occ：表示需匹配到第几次出现的子串。如果为正，则从头往后开始计算，如果为负，则从尾部向前计算
```
MATCH( VAL = 'x1 x2 x3' REGEX = 'x.' OCC = 2 )	"x2
```

find( val = TEXT {sub = substring}|{regex = regex}[occ = occ] )

查找substring或者匹配regex的子串的位置。如果未找到，则返回 -1，返回的为offset，所以从0开始

DATA(RESULT1) = FIND(            VAL = `xxx123yyy` REGEX = `\d+` ).	"3
DATA(RESULT2) = FIND_END(        VAL = `xxx123yyy` REGEX = `\d+` ).	"6
DATA(RESULT3) = FIND_ANY_OF(     VAL = `xxx123yyy` SUB   = `123` ).	"3
DATA(RESULT4) = FIND_ANY_NOT_OF( VAL = `xxx123yyy` SUB   = `x`   ).	"3

posted @ 2020-10-30 14:54 花开半夏930420 阅读(873) 评论(0) 收藏举报

刷新页面返回顶部

花开半夏930420

ABAP-字符串常用处理方法

字符串处理

公告