Fiddler

http://fiddler2.com/documentation/Configure-Fiddler/Tasks/MonitorWindowsPhone7

 

Configure Fiddler

1. Start Fiddler on Fiddler server (the machine that will capture the traffic).

2. Click Tools > Fiddler Options. Click Allow remote clients to connect.

   

3. Restart Fiddler.

4. In the Windows Security Alert dialog, check all three checkboxes and click the Allow Access button.

   

To verify this configuration, enable your Windows Phone 7 WiFi connection and visit http://FIDDLERSERVER:8888, where FIDDLERSERVER is the machine name for the machine running Fiddler. This should display the Fiddler Echo Serviceweb site.

Configure Windows Phone 7

1. Tap Settings > WiFi.

   

2. Tap the active WiFi connection.

   

3. Slide the Proxy Slider to On.

4. In the Server/URL field, type the machine name for the Fiddler server.

5. In the Port field, type 8888.

   

6. Tap the checkmark icon.

Decrypt HTTPS Traffic

1. Configure Fiddler to decrypt HTTPS traffic.

2. On the Windows Phone 7, use Mobile IE to request an HTTPS protocol URL.

3. Under the security warning page, click Continue to website (not recommended).

   

4. Go to http://FIDDLERSERVER:8888/FiddlerRoot.cer.

5. Tap the icon labeled Tap to open the file fiddlerroot.cer.

   

6. Tap install.

   

Note: There is no known resource containing steps to remove security certificates from a Windows 7 Phone. This may prevent connecting to a different Fiddler proxy, which will use a different security certificate.

Disable Monitoring

After Fiddler monitoring is complete:

1. Tap Settings > WiFi.

2. Tap the active WiFi connection.

3. Slide the Proxy Slider to Off.