ASP.NET MVC项目框架快速搭建实战

MVC项目搭建笔记----

 

项目框架采用ASP.NET MVC+Entity Framwork+Spring.Net等技术搭建,采用”Domain Model as View Model“的MVC开发模式,结合了抽象工厂的思想降低了三层之间的耦合,可以使用此套框架进行MVC项目的快速搭建。本框架的架构图如下:

 

第一步(创建分类文件夹):

创建5个文件夹。分别为UI,Model,BLL,DAL,Common,以便于将各模块分类整理。

第二步(项目类库的创建):

在UI文件夹创建ASP.NET MVC4项目模板选择基本。

在Model文件夹创建Model类库项目。

在BLL文件夹创建BLL和IBLL类库项目。

在DAL文件夹创建DAL,IDAL,DALFactory类库项目。

在Common文件夹创建Common类库项目。

第三步(创建EF实体):

在数据库管理工具新建一个数据库,在Model层添加一个ADO.Net实体模型。

建好实体模型,右键选择“根据模型生成数据库”,也可以先建好数据库再右键“从数据库更新模型”。

第四步(各层内容的创建,重点!):

在DAL层创建一个EFDbContextFactory类。(CallContext是类似于方法调用的线程本地存储区的专用集合对象,并提供对每个逻辑执行线程都唯一的数据槽。数据槽不在其他逻线程上的调用上下文之间共享。)

 1 public class EFDbContextFactory
 2     {
 3         public static DbContext GetCurrentDbContext()
 4         {
 5             //线程内的单例:保证线程内实例唯一
 6             DbContext db = (DbContext)CallContext.GetData("DbContext");
 7             if (db == null)
 8             {
 9                 db = new Model1Container();
10 
11                 CallContext.SetData("DbContext", db);
12             }
13             return db;
14         }
15     }

在DAL层创建一个BaseDal类,作为所有Dal的基类,封装crud方法。

 1 public class BaseDal<T> where T : class , new()
 2     {
 3         private DbContext db
 4         {
 5             get
 6             {
 7                 return EFDbContextFactory.GetCurrentDbContext();
 8             }
 9         }
10         public virtual T Add(T entity)
11         {
12             db.Set<T>().Add(entity);
13             return entity;
14         }
15 
16         public virtual bool Update(T entity)
17         {
18             db.Entry(entity).State = EntityState.Modified;
19             return true;
20         }
21 
22         public virtual bool Delete(T entity)
23         {
24             db.Entry(entity).State = EntityState.Deleted;
25             return true;
26 
27         }
28 
29         public virtual int Delete(params int[] ids)
30         {   
31             foreach (var item in ids)
32             {
33                 var entity = db.Set<T>().Find(item);//如果实体已经在内存中,那么就直接从内存拿,如果内存中跟踪实体没有,那么才查询数据库。
34                 db.Set<T>().Remove(entity);
35             }
36             return ids.Count();
37         }
38 
39         public List<T> LoadEntities(Expression<Func<T, bool>> whereLambda)
40         {
41             return db.Set<T>().Where(whereLambda).AsQueryable();
42         }
43 
44         public List<T> LoadPageEntities<S>(int pageSize, int pageIndex, out int total, Expression<Func<T, bool>> whereLambda, Expression<Func<T, S>> orderbyLambda, bool isAsc)
45         {
46             total = db.Set<T>().Where(whereLambda).Count();
47             if (isAsc)
48             {
49                 return
50                 db.Set<T>()
51                   .Where(whereLambda)
52                   .OrderBy(orderbyLambda)
53                   .Skip(pageSize * (pageIndex - 1))
54                   .Take(pageSize)
55                   .AsQueryable().ToList();
56             }
57             else
58             {
59                 return
60                db.Set<T>()
61                  .Where(whereLambda)
62                  .OrderByDescending(orderbyLambda)
63                  .Skip(pageSize * (pageIndex - 1))
64                  .Take(pageSize)
65                  .AsQueryable().ToList();
66             }
67         }
68     }
69 

 

在DAL层添加Dal类的T4模板(Dal类生成模板,生成各Dal类,包括继承类和接口,未给出,可自行编写)。T4模板生成的Dal类内容模板如下:

1 public partial class UserInfoDal : BaseDal<UserInfo>,IUserInfoDal
2 {
3        
4 }    

在IDAL层添加IDal接口类的T4模板(未给出,自行编写)。T4模板生成的IDal类内容模板如下:

1 public partial interface IUserInfoDal :IBaseDal<UserInfo>
2 { 
3 
4 }    

在IDAL层添加IBaseDal接口类,作为IDal的基接口类,子接口只要继承此接口就可以实现crud(增删改查)及分页接口。

1 public interface IBaseDal<T>
2 {
3         T Add(T entity);
4         bool Update(T entity);
5         bool Delete(T entity);
6         int Delete(params int[] ids);
7         List<T> LoadEntities(Expression<Func<T, bool>> whereLambda);
8         List<T> LoadPageEntities<S>(int pageSize, int pageIndex, out int total, Expression<Func<T, bool>> whereLambda, Expression<Func<T, S>> orderbyLambda, bool isAsc);
9 }

在IDAL层添加IDbSession接口类(此类作为DbSession类的约束,符合抽象的思想,不直接返回对象本身,而是返回他的接口,这样就不会直接对对象本身造成依赖,只要修改IDbSession)的T4模板(未给出,自行编写)。T4模板生成的IDbSession类内容模板如下:

1 public partial interface IDbSession
2 {      
3     IUserInfoDal UserInfoDal { get; }
4     int SaveChanges();
5 }    

在DALFactory层添加DbSession类的T4模板(未给出,自行编写)。T4模板生成的DbSession类内容模板如下:

 1 public partial class DbSession :IDbSession
 2     {  
 3     
 4         private IUserInfoDal _UserInfoDal;
 5         public IUserInfoDal UserInfoDal {
 6             get {
 7                 if (_UserInfoDal == null)
 8                 {
 9                     _UserInfoDal =new UserInfoDal();
10                 }
11                 return _UserInfoDal;
12             }
13         }
14 
15         public int SaveChanges()
16         {
17             //这里只需要调用当前线程内部的上下文SaveChange。
18             DbContext dbContext = EFDbContextFactory.GetCurrentDbContext();
19             return dbContext.SaveChanges();
20         }
21     }

在DALFactory层添加DbSessionFactory类,作为dbSession的工厂。

 1 public class DbSessionFactory
 2 {
 3         public static IDbSession GetDbSession()
 4         {
 5             IDbSession dbSession = (IDbSession) CallContext.GetData("DbSession");
 6             if (dbSession == null)
 7             {
 8                 dbSession = new DbSession();
 9                 CallContext.SetData("DbSession", dbSession);
10                 return dbSession;
11             }
12             return dbSession;
13         }
14 }

在IBLL层创建IBaseService基接口类,作为所有IService接口类的crud公共约束。

 1 public interface IBaseService<T>
 2 {
 3         T Add(T entity);
 4         bool Update(T entity);
 5         bool Delete(T entity);
 6         int Delete(params int[] ids);
 7         List<T> LoadEntities(Expression<Func<T, bool>> whereLambda);
 8 
 9         List<T> LoadPageEntities<S>(int pageSize, int pageIndex, out int total,
10                                                   Expression<Func<T, bool>> whereLambda
11                                                   , Expression<Func<T, S>> orderbyLambda, bool isAsc);
12         int Savechanges();
13 }

在IBLL层添加IBLL接口类的T4模板(未给出,自行编写)。T4模板生成的IBLL接口类内容模板如下:

1 public  partial interface IUserInfoService :IBaseService<UserInfo>
2 {
3 
4 }

在BLL层创建BaseService类(作为所有Service类的基类,封装crud方法)。

 1 public abstract class BaseService<T> where T:class,new ()
 2     {
 3         public IDbSession DbSession
 4         {
 5             get { return DbSessionFactory.GetDbSession(); }
 6         }
 7 
 8         public IBaseDal<T> CurrentDal;
 9 
10         public int Savechanges()
11         {
12             return DbSession.SaveChanges();
13         }
14 
15         //要求所有的业务方法在执行之前必须给当前的CurrentDal 赋值。
16         public BaseService()
17         {
18             SetCurrentDal();
19         }
20 
21         //纯抽象方法:子类必须重写此方法。
22         public abstract void SetCurrentDal();
23 
24         public virtual T Add(T entity)
25         {
26             return CurrentDal.Add(entity);
27         }
28 
29         public virtual bool Update(T entity)
30         {
31             CurrentDal.Update(entity);
32 
33             return this.Savechanges() > 0;
34         }
35 
36         public virtual bool Delete(T entity)
37         {
38             return CurrentDal.Delete(entity);
39 
40         }
41 
42         public virtual int Delete(params int[] ids)
43         {
44             return CurrentDal.Delete(ids);
45 
46         }
47 
48         public List<T> LoadEntities(Expression<Func<T, bool>> whereLambda)
49         {
50             return CurrentDal.LoadEntities(whereLambda);
51 
52         }
53 
54         public List<T> LoadPageEntities<S>(int pageSize, int pageIndex, out int total, Expression<Func<T, bool>> whereLambda, Expression<Func<T, S>> orderbyLambda, bool isAsc)
55         {
56             return CurrentDal.LoadPageEntities(pageSize, pageIndex, out total, whereLambda, orderbyLambda, isAsc);
57         }
58     }
BaseService

在BLL层添加Services类的T4模板(未给出,自行编写)。T4模板生成的Service类内容模板如下:

1 public partial class UserInfoService:BaseService<UserInfo>,IUserInfoService
2 {
3         public override void SetCurrentDal()
4         {
5             CurrentDal = DbSession.UserInfoDal;//对父类虚方法进行重写,以对Dal初始化。
6         }
7 }

第五步(配置Spring.Net框架):

在UI层添加lib文件夹(用于存放所有外部引用文件),将Spring.Net程序集文件夹放到lib文件夹下,UI层添加对Spring.Core,Spring.Web,Spring.Web.Extensions,Spring.Web.Mvc4程序集的引用。

在Global.asax文件里将MvcApplication类继承至SpringMvcApplication。

在Web.config文件里的<configuration>下的<configSections>节点下添加:

1 <!--Spring配置节点-->
2     <sectionGroup name="spring">
3       <section name="context" type="Spring.Context.Support.MvcContextHandler, Spring.Web.Mvc4"/>
4       <section name="objects" type="Spring.Context.Support.DefaultSectionHandler, Spring.Core" />
5     </sectionGroup>
6 <!--Spring配置节点结束-->

在Web.config文件里的<configuration>节点下添加:

 1 <!--Spring配置节点-->
 2   <spring>
 3 
 4     <context>
 5       <!--选择XML文件的位置,3种方式,1 配置文件 2 定位文件 3 程序集-->
 6       <!--<resource uri="config://spring/objects"/>-->
 7       <!--resource uri="file://ServiceXml.xml"/-->
 8       <!--resource uri="file://Controllers.xml"/-->
 9       <resource uri="assembly://MyOA_BLL/MyOA_BLL/ServiceXml.xml"/>
10       <resource uri="assembly://MyOA/MyOA/Controllers.xml"/>
11       <!--<resource uri="assembly://SpringNetTest/SpringNetTest/objects1.xml"/>-->
12     </context>
13     <objects xmlns="http://www.springframework.net">
14 
15     </objects>
16 
17   </spring>
18   <!--Spring配置节点结束-->

第六步(注入Service对象):

在BLL层添加生成ServiceXml配置文件的T4模板(Speing.Net属性注入方法请参见  http://www.cnblogs.com/sunniest/p/4125561.html   ),内容模板为:

1 <objects xmlns="http://www.springframework.net"> 
2     <object name="UserInfoService" type="MyOA_BLL.UserInfoService, MyOA_BLL"  singleton="false">
3 
4   </object>
5   
6 </objects>

在Controller文件夹下的各Controller类中添加

1 public IUserInfoService UserInfoService{get;set;}
2 IDbSession session = DbSessionFactory.GetDbSession();

用UserInfoService来调用业务逻辑的方法(通过Spring.net注入UserInfoService对象),在操作完成后用session的savechanges方法控制将对实体的操作保存到数据库中。

在UI层添加Controller.xml文件(用于向Controller类注入UserInfoService对象),内容模板为:

1 <objects xmlns="http://www.springframework.net">
2   <object name="TestController" type="MyOA.Controllers.TestController, MyOA"  singleton="false">
3     <property name="UserInfoService" ref="UserInfoService" />
4   </object>
5 
6 </objects>

至此项目基本框架搭建完成!

 

Controller调用业务逻辑层完整代码示例:

 1      public ActionResult Test()
 2         {
 3             return View();
 4         }
 5 
 6         [HttpPost]
 7         public ActionResult Test(string uname,string pwd)
 8         {
 9             UserInfo u =new UserInfo();
10             u.UserName=uname;
11             u.Pwd=pwd;
12             var t = UserInfoService.Add(u);
13             session.SaveChanges();
14             if(t.Id>0){
15                 return Content("注册成功!");
16             }
17             else{
18                 return Content("注册失败!");
19             }
20         }

 

本文如果有什么错误或各位大神有什么建议和不同理解,可以回复交流一下,让本文达到抛砖引玉的目的。

posted @ 2014-12-02 19:33  Sunnier  阅读(25562)  评论(63编辑  收藏  举报