第二部分

安装ise

第一步:创建虚拟机

liunx选择其他2.6xlinux(32位),cpu最少2赫,内存4g,硬盘200g,网卡最少2个,真机4个.只有第一个网卡可以通过https网管.

第二步:安装ise1.0

boot:1(选择1进行安装)

localhost login:setup

Enter hostname[]:ISE-1

Enter IP address[]:137.78.5.55

Enter IP default netmask[]:255.255.255.0

Enter IP default gateway[]:137.78.5.254

Enter default DNS domain[]:mingjiao.org

Enter primary nameserver[]:202.100.1.168

Add/Edit another nameserver? Y/N:y

Enter secondary nameserver[]:8.8.8.8

Add/Edit another nameserver? Y/N:n

Enter system timezone[UTC]:Asia/Chongqing(时区)

Enter username[admin]:(底层账户密码)

Enter password:

Enter password again:

Nameserver ping failed.Retry? Y/N:n

able until it is re-installed.Retry?Y/N:n

第三步:配置securecrt

默认可以通过ssh网管ise.

第四步:升级ise到1.1版本

升级当前版本为1.0.4.5.7.3

ISE-1/admin#config t

ISE-1/admin(config)#repository CDROM(挂光驱)

ISE-1/admin(config-repository)#url cdrom:CDROM

ISE-1/admin#show repository CDROM

ISE-1/admin#show run

ISE-1/admin#application upgrade ise-appbundle-1.1.0665.i386.tar.gz CDROM(升级)

ISE-1/admin#show version

第五步:为ISE1.1打补丁

ISE-1/admin#config t

ISE-1/admin(config)#repository CDROM(挂光驱)

ISE-1/admin(config-repository)#url cdrom:CDROM

ISE-1/admin#show repository CDROM

ISE-1/admin#patch install ise-patchbundle-1.1.0.665-1-55132.i386.tar.gz CDROM

第六步:升级ise到1.1.1版本

ISE-1/admin#show repository CDROM

ISE-1/admin#application upgrade ise-appbundle-1.1.1.268.i386.gz CDROM

ISE-1/admin#show version

第七步:第一次登陆修改密码

admin

默认密码为cisco

第八步:ise home界面