理解Kubernetes（1）：手工搭建Kubernetes测试环境

理解Kubernetes系列文章：

手工搭建环境
基本概念和操作

1. 基础环境准备

准备 3个Ubuntu节点，操作系统版本为 16.04，并做好以下配置：

系统升级
设置 /etc/hosts 文件，保持一致
设置从 0 节点上无密码ssh 其它两个节点

节点名称	IP地址	etcd	flanneld	K8S	docker
kub-node-0	172.23.100.4	Y	Y	master： kubctl kube-apiserver kuber-controller kuber-scheduler	Y
kub-node-1	172.23.100.5	Y	Y	node： kube-proxy kubelet	Y
kub-node-2	172.23.100.6	Y	Y	node： kube-proxy kubelet	Y

2. 安装与部署

2.1 安装 etcd

2.1.1 安装

在3个节点上运行以下命令来安装 etcd 3.2.5 版本：

ETCD_VERSION=${ETCD_VERSION:-"3.2.5"}
ETCD="etcd-v${ETCD_VERSION}-linux-amd64"
curl -L https://github.com/coreos/etcd/releases/download/v${ETCD_VERSION}/${ETCD}.tar.gz -o etcd.tar.gz
tar xzf etcd.tar.gz -C /tmp
mv /tmp/etcd-v${ETCD_VERSION}-linux-amd64 /opt/bin/

2.1.2 配置

在3个节点上做如下配置：

sudo mkdir -p /var/lib/etcd/
sudo mkdir -p /opt/config/

创建 /opt/config/etcd.conf 文件：

ETCD_DATA_DIR=/var/lib/etcd
ETCD_NAME="kub-node-0"
ETCD_INITIAL_CLUSTER="kub-node-0=http://172.23.100.4:2380,kub-node-1=http://172.23.100.5:2380,kub-node-2=http://172.23.100.6:2380"
ETCD_INITIAL_CLUSTER_STATE=new
ETCD_LISTEN_PEER_URLS=http://172.23.100.4:2380
ETCD_INITIAL_ADVERTISE_PEER_URLS=http://172.23.100.4:2380
ETCD_ADVERTISE_CLIENT_URLS=http://172.23.100.4:2379
ETCD_LISTEN_CLIENT_URLS=http://172.23.100.4:2379,http://127.0.0.1:2379

注意：

（1）在 0 节点上 etcd cluster 起来后，1 和 2 上的 ETCD_INITIAL_CLUSTER_STATE 值需要改成 existing，表示加入已有集群。否则的话，它自己会创建一个cluster，而不是加入已有cluster。

（2）在每个节点上，IP 地址需要修改为本机地址。

创建 /lib/systemd/system/etcd.service 文件：

[Unit]
Description=Etcd Server
Documentation=https://github.com/coreos/etcd
After=network.target
[Service]
User=root
Type=simple
EnvironmentFile=-/opt/config/etcd.conf
ExecStart=/opt/bin/etcd
Restart=on-failure
RestartSec=10s
LimitNOFILE=40000
[Install]
WantedBy=multi-user.target

每个节点上都是一样的。

在三个节点上启动服务：

systemctl daemon-reload
systemctl enable etcd
systemctl start etcd

2.1.3 测试服务

查看etcd集群状态：

root@kub-node-2:/home/ubuntu# /opt/bin/etcdctl cluster-health
member 664b85ff39242fbc is healthy: got healthy result from http://172.23.100.6:2379
member 9dd263662a4b6f73 is healthy: got healthy result from http://172.23.100.4:2379
member b17535572fd6a37b is healthy: got healthy result from http://172.23.100.5:2379
cluster is healthy

查看 etcd 集群成员：

root@kub-node-0:/home/ubuntu# /opt/bin/etcdctl member list
9dd263662a4b6f73: name=kub-node-0 peerURLs=http://172.23.100.4:2380 clientURLs=http://172.23.100.4:2379 isLeader=false
b17535572fd6a37b: name=kub-node-1 peerURLs=http://172.23.100.5:2380 clientURLs=http://172.23.100.5:2379 isLeader=true
e6db3cac1db23670: name=kub-node-2 peerURLs=http://172.23.100.6:2380 clientURLs=http://172.23.100.6:2379 isLeader=false

2.2 部署flanneld

2.2.1 安装 0.8.0 版本

在每个节点上：

curl -L https://github.com/coreos/flannel/releases/download/v0.8.0/flannel-v0.8.0-linux-amd64.tar.gz flannel.tar.gz
tar xzf flannel.tar.gz -C /tmp
mv /tmp/flanneld /opt/bin/

2.2.2 配置

在每个节点上：

创建 /lib/systemd/system/flanneld.service 文件：

[Unit]
Description=Flanneld
Documentation=https://github.com/coreos/flannel
After=network.target
Before=docker.service
[Service]
User=root
ExecStart=/opt/bin/flanneld \
--etcd-endpoints="http://172.23.100.4:2379,http://172.23.100.5:2379,http://172.23.100.4:2379" \
--iface=172.23.100.4 \
--ip-masq
Restart=on-failure
Type=notify
LimitNOFILE=65536

注意：在每个节点上，iface 设置为本机ip。

在 0 node上，运行

/opt/bin/etcdctl --endpoints="http://172.23.100.4:2379,http://172.23.100.5:2379,http://172.23.100.4:2379" mk /coreos.com/network/config \ '{"Network":"10.1.0.0/16", "Backend": {"Type": "vxlan"}}'

确认：

root@kub-node-0:/home/ubuntu# /opt/bin/etcdctl --endpoints="http://172.23.100.4:2379,http://172.23.100.5:2379,http://172.23.100.4:2379" get /coreos.com/network/config
 {"Network":"10.1.0.0/16", "Backend": {"Type": "vxlan"}}

在三个节点上启动 flannled：

systemctl daemon-reload
systemctl enable flanneld
systemctl start flanneld

备注：flannel服务需要先于Docker启动。flannel服务启动时主要做了以下几步的工作：

从etcd中获取network的配置信息。
划分subnet，并在etcd中进行注册。
将子网信息记录到/run/flannel/subnet.env中。

此时，能看到 etcd 中的 subnet：

root@kub-node-0:/home/ubuntu/kub# /opt/bin/etcdctl --endpoints="http://172.23.100.4:2379,http://172.23.100.5:2379,http://172.23.100.4:2379"; ls /coreos.com/network/subnets
/coreos.com/network/subnets/10.1.35.0-24
/coreos.com/network/subnets/10.1.1.0-24
/coreos.com/network/subnets/10.1.79.0-24

2.2.3 验证

通过运行 service flanneld status 查看其状态。
检查 flannel 虚拟网卡。它们的配置需要和 etcd 中的配置一致。

root@kub-node-0:/home/ubuntu/kub# ifconfig flannel.1
flannel.1 Link encap:Ethernet  HWaddr 22:fc:69:01:33:30
          inet addr:10.1.35.0  Bcast:0.0.0.0  Mask:255.255.255.255
 
root@kub-node-1:/home/ubuntu# ifconfig flannel.1
flannel.1 Link encap:Ethernet  HWaddr 0a:6e:a6:6f:95:04
          inet addr:10.1.1.0  Bcast:0.0.0.0  Mask:255.255.255.255
 
root@kub-node-2:/home/ubuntu# ifconfig flannel.1
flannel.1 Link encap:Ethernet  HWaddr 6e:10:b3:53:1e:f4
          inet addr:10.1.79.0  Bcast:0.0.0.0  Mask:255.255.255.255

2.3 部署 Docker

2.3.1 安装

参考 https://docs.docker.com/engine/installation/linux/docker-ce/ubuntu/#install-docker-ce-1，在每个节点上运行以下命令来安装Docker：

   sudo apt-get update
   sudo apt-get install     apt-transport-https     ca-certificates     curl     software-properties-common
   curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
   sudo apt-key fingerprint 0EBFCD88
   sudo add-apt-repository    "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
   $(lsb_release -cs) \
   stable"
   sudo apt-get update
   sudo apt-get install docker-ce

2.3.2 验证

创建并运行 hello-world 容器：

root@kub-node-0:/home/ubuntu/kub# docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
ca4f61b1923c: Pull complete
Digest: sha256:445b2fe9afea8b4aa0b2f27fe49dd6ad130dfe7a8fd0832be5de99625dad47cd
Status: Downloaded newer image for hello-world:latest
 
Hello from Docker!
This message shows that your installation appears to be working correctly.

2.3.3 配置

在每个节点上：

进入 /tmp 目录，运行 cp mk-docker-opts.sh /usr/bin/ 拷贝文件

执行下面的命令

root@kub-node-0:/home/ubuntu/kub# mk-docker-opts.sh -i
root@kub-node-0:/home/ubuntu/kub# source /run/flannel/subnet.env
root@kub-node-0:/home/ubuntu/kub# ifconfig docker0
docker0   Link encap:Ethernet  HWaddr 02:42:bc:71:d0:22
          inet addr:172.17.0.1  Bcast:172.17.255.255  Mask:255.255.0.0
          inet6 addr: fe80::42:bcff:fe71:d022/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:258 (258.0 B)
 
root@kub-node-0:/home/ubuntu/kub# ifconfig docker0 ${FLANNEL_SUBNET}
root@kub-node-0:/home/ubuntu/kub# ifconfig docker0
docker0   Link encap:Ethernet  HWaddr 02:42:bc:71:d0:22
          inet addr:10.1.35.1  Bcast:10.1.35.255  Mask:255.255.255.0
          inet6 addr: fe80::42:bcff:fe71:d022/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:258 (258.0 B)

修改 /lib/systemd/system/docker.service 文件为：

[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
EnvironmentFile=/var/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd -g /data/docker  --bip=${FLANNEL_SUBNET} --mtu=${FLANNEL_MTU}
ExecReload=/bin/kill -s HUP $MAINPID
#ExecStart=/usr/bin/dockerd -H fd://
#ExecReload=/bin/kill -s HUP $MAINPID

放开 iptables 规则

iptables -F
iptables -X
iptables -Z
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables-save

重启 docker 服务

systemctl daemon-reload
systemctl enable docker
systemctl restart docker

验证

在三个节点上，运行命令 docker run -it ubuntu bash 启动一个 ubuntu 容器，其ip 分别为 10.1.35.2，10.1.79.2，10.1.1.2。互相ping，可通。

2.4 证书创建与配置

2.4.1 0 节点上的配置

在 0 节点上，创建 master_ssl.cnf 文件：

[req]
req_extensions = v3_req
distinguished_name = req_distinguished_name
[req_distinguished_name]
[ v3_req ]
basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment
subjectAltName = @alt_names
[alt_names]
DNS.1 = kubernetes
DNS.2 = kubernetes.default
DNS.3 = kubernetes.default.svc
DNS.4 = kubernetes.default.svc.cluster.local
DNS.5 = master
IP.1 = 192.1.0.1
IP.2 = 172.23.100.4

生成 master 证书：

openssl genrsa -out ca.key 2048
openssl req -x509 -new -nodes -key ca.key -subj "/CN=company.com" -days 10000 -out ca.crt
openssl genrsa -out server.key 2048
openssl req -new -key server.key -subj "/CN=master" -config master_ssl.cnf -out server.csr
openssl x509 -req -in server.csr -CA ca.crt -CAkey ca.key -CAcreateserial -days 10000 -extensions v3_req -extfile master_ssl.cnf -out server.crt
openssl genrsa -out client.key 2048
openssl req -new -key client.key -subj "/CN=node" -out client.csr
openssl x509 -req -in client.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out client.crt -days 10000

将生成的文件拷贝至 /root/key 文件夹

root@kub-node-0:/home/ubuntu/kub# ls /root/key
ca.crt  ca.key  client.crt  client.key  server.crt  server.key

将 ca.crt 文件和 ca.key 文件拷贝到各个node节点上的 /home/ubuntu/kub 文件夹中。

2.4.2 在 1 和 2 节点上的配置

在 1 和 2 上分别执行下面的操作。下面的示例以节点2为例，1上需要修改IP地址。

运行：

CLINET_IP=172.23.100.6
openssl genrsa -out client.key 2048
openssl req -new -key client.key -subj "/CN=${CLINET_IP}" -out client.csr
openssl x509 -req -in client.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out client.crt -days 10000

结果：

root@kub-node-2:/home/ubuntu/kub# ls -lt
total 8908
-rw-r--r-- 1 root root     985 Dec 31 20:57 client.crt
-rw-r--r-- 1 root root      17 Dec 31 20:57 ca.srl
-rw-r--r-- 1 root root     895 Dec 31 20:57 client.csr
-rw-r--r-- 1 root root    1675 Dec 31 20:57 client.key
-rw-r--r-- 1 root root    1099 Dec 31 20:54 ca.crt
-rw-r--r-- 1 root root    1675 Dec 31 20:54 ca.key

将 client 和 ca 的 .crt 和 .key 拷贝至 /root/key 文件夹。此时其中有4个文件：

root@kub-node-2:/home/ubuntu# ls /root/key
ca.crt  ca.key  client.crt  client.key

创建 /etc/kubernetes/kubeconfig 文件

apiVersion: v1
clusters:
- cluster:
    certificate-authority: /root/key/ca.crt
    server: https://172.23.100.4:6443
  name: ubuntu
contexts:
- context:
    cluster: ubuntu
    user: ubuntu
  name: ubuntu
current-context: ubuntu
kind: Config
preferences: {}
users:
- name: ubuntu
  user:
    client-certificate: /root/key/client.crt
    client-key: /root/key/client.key

2.5 Kubernetes master 节点配置

在 0 节点上做如下操作。

2.5.1 安装Kubernetes 1.8.5 版本

curl -L https://dl.k8s.io/v1.8.5/kubernetes-server-linux-amd64.tar.gz kuber.tar.gz
tar xzf kuber.tar.gz -C /tmp3
mv /tmp3/kubernetes/server/bin/* /opt/bin

2.5.2 配置服务

创建 /lib/systemd/system/kube-apiserver.service 文件

[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
User=root
ExecStart=/opt/bin/kube-apiserver \
--secure-port=6443 \
--etcd-servers=http://172.23.100.4:2379,http://172.23.100.5:2379,http://172.23.100.6:2379 \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--allow-privileged=false \
--service-cluster-ip-range=192.1.0.0/16 \
--admission-control=NamespaceLifecycle,LimitRanger,ServiceAccount,SecurityContextDeny,ResourceQuota \
--service-node-port-range=30000-32767 \
--advertise-address=172.23.100.4 \
--client-ca-file=/root/key/ca.crt \
--tls-cert-file=/root/key/server.crt \
--tls-private-key-file=/root/key/server.key
Restart=on-failure
Type=notify
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

创建 /lib/systemd/system/kube-controller-manager.service 文件

[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
User=root
ExecStart=/opt/bin/kube-controller-manager \
--master=https://172.23.100.4:6443 \
--root-ca-file=/root/key/ca.crt \
--service-account-private-key-file=/root/key/server.key \
--kubeconfig=/etc/kubernetes/kubeconfig \
--logtostderr=false \
--log-dir=/var/log/kubernetes
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

创建 /lib/systemd/system/kube-scheduler.service 文件

[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
[Service]
User=root
ExecStart=/opt/bin/kube-scheduler \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--master=https://172.23.100.4:6443 \
--kubeconfig=/etc/kubernetes/kubeconfig
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

启动服务

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl enable kube-controller-manager
systemctl enable kube-scheduler
systemctl enable flanneld
systemctl start kube-apiserver
systemctl start kube-controller-manager
systemctl start kube-scheduler

确认各服务状态

systemctl status kube-apiserver
systemctl status kube-controller-manager
systemctl status kube-scheduler

2.6 配置 kubectl

在 0 节点上，创建 /root/.kube/config 文件：

apiVersion: v1
clusters:
- cluster:
    certificate-authority: /root/key/ca.crt
  name: ubuntu
contexts:
- context:
    cluster: ubuntu
    user: ubuntu
  name: ubuntu
current-context: ubuntu
kind: Config
preferences: {}
users:
- name: ubuntu
  user:
    client-certificate: /root/key/client.crt
    client-key: /root/key/client.key

2.7 Kubernetes node 节点配置

节点1 和 2 为 K8S node 节点。在它们上执行下面的操作。

2.7.1 安装

同 2.4.1 。

2.7.2 配置

在 1 和 2 分别执行操作。下面的内容为1上的，2上的需要将 127.23.100.5 修改为 127.23.100.6 地址。
创建 /lib/systemd/system/kubelet.service 文件

[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service
[Service]
ExecStart=/opt/bin/kubelet \
--hostname-override=172.23.100.5 \
--pod-infra-container-image="docker.io/kubernetes/pause" \
--cluster-domain=cluster.local \
--log-dir=/var/log/kubernetes \
--cluster-dns=192.1.0.100 \
--kubeconfig=/etc/kubernetes/kubeconfig \
--logtostderr=false
Restart=on-failure
KillMode=process
[Install]
WantedBy=multi-user.target
[Unit]
Description=Kubernetes Proxy
After=network.target

创建 /lib/systemd/system/kube-proxy.service 文件

[Unit]
Description=Kubernetes Proxy
After=network.target
[Service]
ExecStart=/opt/bin/kube-proxy \
--hostname-override=172.23.100.5 \
--master=https://172.23.100.4:6443 \
--log-dir=/var/log/kubernetes \
--kubeconfig=/etc/kubernetes/kubeconfig \
--logtostderr=false
Restart=on-failure
[Install]
WantedBy=multi-user.target

启动服务

systemctl daemon-reload
systemctl enable kubelet
systemctl enable kube-proxy
systemctl start kubelet
systemctl start kube-proxy

确认各组件的运行状态

systemctl status kubelet
systemctl status kube-proxy

3. 验证

3.1 获取集群信息

在节点 0 上运行以下命令。

获取 master 节点

root@kub-node-0:/home/ubuntu/kub# kubectl cluster-info
Kubernetes master is running at http://localhost:8080

查看node 节点

root@kub-node-0:/home/ubuntu/kub# kubectl get nodes
NAME           STATUS    ROLES     AGE       VERSION
172.23.100.5   Ready     <none>    2d        v1.8.5
172.23.100.6   Ready     <none>    2d        v1.8.5

3.2 部署第一个应用

创建 nginx.yml 文件

apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: my-nginx4
spec:
  replicas: 2
  template:
    metadata:
      labels:
        app: my-nginx4
    spec:
      containers:
      - name: my-nginx4
        image: nginx
        ports:
        - containerPort: 80

创建一个deployment

root@kub-node-0:/home/ubuntu/kub# kubectl create -f nginx4.yml
deployment "my-nginx4" created

查看状态

root@kub-node-0:/home/ubuntu/kub# kubectl get all
NAME               DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
deploy/my-nginx4   2         2         2            2           3m

NAME                      DESIRED   CURRENT   READY     AGE
rs/my-nginx4-75bbfccc7c   2         2         2         3m

NAME               DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
deploy/my-nginx4   2         2         2            2           3m

NAME                      DESIRED   CURRENT   READY     AGE
rs/my-nginx4-75bbfccc7c   2         2         2         3m

NAME                            READY     STATUS    RESTARTS   AGE
po/my-nginx4-75bbfccc7c-5frpl   1/1       Running   0          3m
po/my-nginx4-75bbfccc7c-5kr4j   1/1       Running   0          3m

NAME             TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
svc/kubernetes   ClusterIP   192.1.0.1    <none>        443/TCP   2d

查看该部署的详细信息

root@kub-node-0:/home/ubuntu/kub# kubectl describe deployments my-nginx4
Name:                   my-nginx4
Namespace:              default
CreationTimestamp:      Wed, 03 Jan 2018 09:16:44 +0800
Labels:                 app=my-nginx4
Annotations:            deployment.kubernetes.io/revision=1
Selector:               app=my-nginx4
Replicas:               2 desired | 2 updated | 2 total | 2 available | 0 unavailable
StrategyType:           RollingUpdate
MinReadySeconds:        0
RollingUpdateStrategy:  1 max unavailable, 1 max surge
Pod Template:
  Labels:  app=my-nginx4
  Containers:
   my-nginx4:
    Image:        nginx
    Port:         80/TCP
    Environment:  <none>
    Mounts:       <none>
  Volumes:        <none>
Conditions:
  Type           Status  Reason
  ----           ------  ------
  Available      True    MinimumReplicasAvailable
OldReplicaSets:  <none>
NewReplicaSet:   my-nginx4-75bbfccc7c (2/2 replicas created)
Events:
  Type    Reason             Age   From                   Message
  ----    ------             ----  ----                   -------
  Normal  ScalingReplicaSet  1m    deployment-controller  Scaled up replica set my-nginx4-75bbfccc7c to 2

查看 pod 的详细信息能看到它的容器、IP地址和所在的node节点

root@kub-node-0:/home/ubuntu/kub# kubectl describe pod my-nginx4-75bbfccc7c-5frpl
Name:           my-nginx4-75bbfccc7c-5frpl
Namespace:      default
Node:           172.23.100.5/172.23.100.5
Start Time:     Wed, 03 Jan 2018 09:16:45 +0800
Labels:         app=my-nginx4
                pod-template-hash=3166977737
Annotations:    kubernetes.io/created-by={"kind":"SerializedReference","apiVersion":"v1","reference":{"kind":"ReplicaSet","namespace":"default","name":"my-nginx4-75bbfccc7c","uid":"c2d83729-f023-11e7-a605-fa163e9a22a...
Status:         Running
IP:             10.1.1.3
Created By:     ReplicaSet/my-nginx4-75bbfccc7c
Controlled By:  ReplicaSet/my-nginx4-75bbfccc7c
Containers:
  my-nginx4:
    Container ID:   docker://4a994121e309fb81181e22589982bf8c053287616ba7c92dcddc5e7fb49927b1
    Image:          nginx
    Image ID:       docker-pullable://nginx@sha256:cf8d5726fc897486a4f628d3b93483e3f391a76ea4897de0500ef1f9abcd69a1
    Port:           80/TCP
    State:          Running
      Started:      Wed, 03 Jan 2018 09:16:53 +0800
    Ready:          True
    Restart Count:  0
    Environment:    <none>
    Mounts:
      /var/run/secrets/kubernetes.io/serviceaccount from default-token-b2p4z (ro)
Conditions:
  Type           Status
  Initialized    True
  Ready          True
  PodScheduled   True
Volumes:
  default-token-b2p4z:
    Type:        Secret (a volume populated by a Secret)
    SecretName:  default-token-b2p4z
    Optional:    false
QoS Class:       BestEffort
Node-Selectors:  <none>
Tolerations:     <none>
Events:
  Type    Reason                 Age   From                   Message
  ----    ------                 ----  ----                   -------
  Normal  Scheduled              5m    default-scheduler      Successfully assigned my-nginx4-75bbfccc7c-5frpl to 172.23.100.5
  Normal  SuccessfulMountVolume  5m    kubelet, 172.23.100.5  MountVolume.SetUp succeeded for volume "default-token-b2p4z"
  Normal  Pulling                5m    kubelet, 172.23.100.5  pulling image "nginx"
  Normal  Pulled                 5m    kubelet, 172.23.100.5  Successfully pulled image "nginx"
  Normal  Created                5m    kubelet, 172.23.100.5  Created container
  Normal  Started                5m    kubelet, 172.23.100.5  Started container

在节点 1 上能看到该pod包含的容器。其中 pause 容器比较特殊，是一个 K8S 基础设施类容器。

root@kub-node-1:/home/ubuntu# docker ps
CONTAINER ID        IMAGE               COMMAND                  CREATED             STATUS              PORTS               NAMES
4a994121e309        nginx               "nginx -g 'daemon of…"   2 minutes ago       Up 2 minutes                            k8s_my-nginx4_my-nginx4-75bbfccc7c-5frpl_default_c35b9521-f023-11e7-a605-fa163e9a22a6_0
e3f39d708800        kubernetes/pause    "/pause"                 2 minutes ago       Up 2 minutes                            k8s_POD_my-nginx4-75bbfccc7c-5frpl_default_c35b9521-f023-11e7-a605-fa163e9a22a6_0

创建一个 NodePort 来访问该应用

root@kub-node-0:/home/ubuntu/kub# kubectl expose deployment my-nginx4 --type=NodePort --name=nginx-nodeport
service "nginx-nodeport" exposed

看到通过 node IP 访问的端口为 31362

root@kub-node-0:/home/ubuntu/kub# kubectl get svc
NAME             TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
kubernetes       ClusterIP   192.1.0.1       <none>        443/TCP        2d
nginx-nodeport   NodePort    192.1.216.223   <none>        80:31362/TCP   31s

通过 <node-ip>:<node-port> 访问 ngnix

root@kub-node-0:/home/ubuntu/kub# curl http://172.23.100.5:31362
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
    body {
        width: 35em;
        margin: 0 auto;
        font-family: Tahoma, Verdana, Arial, sans-serif;
    }
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>

<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>

<p><em>Thank you for using nginx.</em></p>
</body>
</html>

4.踩过的一些坑

K8S 1.7.2 版本无法创建 pod。kublet 一直报下面的错误。原因是因为该版本有bug，切换至 1.8.5 正常。

W0101 20:25:25.636397   25702 helpers.go:771] eviction manager: no observation found for eviction signal allocatableNodeFs.available
W0101 20:25:35.680877   25702 helpers.go:771] eviction manager: no observation found for eviction signal allocatableNodeFs.available
W0101 20:25:45.728875   25702 helpers.go:771] eviction manager: no observation found for eviction signal allocatableNodeFs.available
W0101 20:25:55.756455   25702 helpers.go:771] eviction manager: no observation found for eviction signal allocatableNodeFs.available

看不到 k8s 服务的日志。fix 方法为在各服务的配置文件中，设置 logtostderr = false 以及添加 log-dir 并手动创建该 dir。
使用 hello-world 容器部署一个应用，pod 状态一直在 CrashLoopBackOff。其原因是因为该容器是启动即退出的，因此K8S会不停地启动pod。

root@kub-node-0:/home/ubuntu# kubectl get pods
NAME                          READY     STATUS             RESTARTS   AGE
hello-world-5c9bd8867-76jjg   0/1       CrashLoopBackOff   7          12m
hello-world-5c9bd8867-92275   0/1       CrashLoopBackOff   7          12m
hello-world-5c9bd8867-cn75n   0/1       CrashLoopBackOff   7          12m

创建第一个部署失败，pod 状态一直停留在 ContainerCreating。kubelet 日志如下。原因是因为 kubelet 要去 gcr.io 上拉取 pause 镜像，而这个站点被墙了。fix方法为在 kueblet service 配置文件中使用 --pod-infra-container-image="docker.io/kubernetes/pause”。原因分析在这里。

E0101 22:34:51.908652   29137 kuberuntime_manager.go:633] createPodSandbox for pod "my-nginx3-596b5c5f58-vgvlb_default(aedfbe1b-eefc-11e7-b10d-fa163e9a22a6)" failed: rpc error: code = Unknown desc = failed pulling image "gcr.io/google_containers/pause-amd64:3.0": Error response from daemon: Get https://gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
E0101 22:34:51.908755   29137 pod_workers.go:182] Error syncing pod aedfbe1b-eefc-11e7-b10d-fa163e9a22a6 ("my-nginx3-596b5c5f58-vgvlb_default(aedfbe1b-eefc-11e7-b10d-fa163e9a22a6)"), skipping: failed to "CreatePodSandbox" for "my-nginx3-596b5c5f58-vgvlb_default(aedfbe1b-eefc-11e7-b10d-fa163e9a22a6)" with CreatePodSandboxError: "CreatePodSandbox for pod \"my-nginx3-596b5c5f58-vgvlb_default(aedfbe1b-eefc-11e7-b10d-fa163e9a22a6)\" failed: rpc error: code = Unknown desc = failed pulling image \"gcr.io/google_containers/pause-amd64:3.0\": Error response from daemon: Get https://gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)”

创建 LoadBalancer 类型的 service 后，该 service 的 EXTERNAL-IP 一直停留在 Pending。其原因是因为该功能需要云平台上支持。改为 NodePort 就正常了。
部署 nginx 应用和 NodePort service 后，无法通过 service 的 nodeport 访问。原因是因为 yml 文件中 containerport 写错了，ngnix 使用的端口为 80. 修改后重新部署问题消除。

参考文章：

http://zucker.com.cn/2017/07/23/k8s/

posted on 2018-01-03 09:52 SammyLiu 阅读(10825) 评论(8) 编辑收藏举报