Saltstack module ethtool 详解

ethtool.show_driver

Queries the specified network device for associated driver information

CLI Example:

salt '*' ethtool.show_driver

ethtool.show_ring

Queries the specified network device for rx/tx ring parameter information

CLI Example:

salt '*' ethtool.show_ring

ethtool.show_offload

Queries the specified network device for the state of protocol offload and other features

CLI Example:

salt '*' ethtool.show_offload

ethtool.set_coalesce

Changes the coalescing settings of the specified network device

CLI Example:

salt '*' ethtool.set_coalesce [adaptive_rx=on|off] [adaptive_tx=on|off] [rx_usecs=N] [rx_frames=N]
[rx_usecs_irq=N] [rx_frames_irq=N] [tx_usecs=N] [tx_frames=N] [tx_usecs_irq=N] [tx_frames_irq=N]
[stats_block_usecs=N] [pkt_rate_low=N] [rx_usecs_low=N] [rx_frames_low=N] [tx_usecs_low=N] [tx_frames_low=N]
[pkt_rate_high=N] [rx_usecs_high=N] [rx_frames_high=N] [tx_usecs_high=N] [tx_frames_high=N]
[sample_interval=N]

ethtool.set_ring

Changes the rx/tx ring parameters of the specified network device

CLI Example:

salt '*' ethtool.set_ring [rx=N] [rx_mini=N] [rx_jumbo=N] [tx=N]

ethtool.set_offload

Changes the offload parameters and other features of the specified network device

CLI Example:

salt '*' ethtool.set_offload tcp_segmentation_offload=on

ethtool.show_coalesce

Queries the specified network device for coalescing information

CLI Example:

salt '*' ethtool.show_coalesce