搭建NTP服务器

一、搭建时间同步服务器
1、编译安装ntp server
rpm -qa | grep ntp
若没有找到,则说明没有安装ntp包,从光盘上找到ntp包,使用
rpm -Uvh ntp***.rpm
进行安装
2、修改ntp.conf配置文件
vi /etc/ntp.conf
①、第一种配置:允许任何IP的客户机都可以进行时间同步
将“restrict default nomodify notrap noquery”这行修改成:
restrict default nomodify notrap
配置文件示例:/etc/ntp.conf
②、第二种配置:只允许192.168.211.***网段的客户机进行时间同步
在restrict default nomodify notrap noquery(表示默认拒绝所有IP的时间同步)之后增加一行:
restrict 192.168.211.0 mask 255.255.255.0 nomodify notrap
3、启动ntp服务
service ntpd start
开机启动服务
chkconfig ntpd on
4、ntpd启动后,客户机要等几分钟再与其进行时间同步,否则会提示“no server suitable for synchronization found”错误。


二、配置时间同步客户机

手工执行 ntpdate <ntp server> 来同步
或者利用crontab来执行
crontab -e
0 21 * * * ntpdate 192.168.211.22 >> /root/ntpdate.log 2>&1
每天晚上9点进行同步
附:
当用ntpdate -d 来查询时会发现导致 no server suitable for synchronization found 的错误的信息有以下2个:
错误1.Server dropped: Strata too high
在ntp客户端运行ntpdate serverIP,出现no server suitable for synchronization found的错误。
在ntp客户端用ntpdate –d serverIP查看,发现有“Server dropped: strata too high”的错误,并且显示“stratum 16”。而正常情况下stratum这个值得范围是“0~15”。
这是因为NTP server还没有和其自身或者它的server同步上。
以下的定义是让NTP Server和其自身保持同步,如果在/ntp.conf中定义的server都不可用时,将使用local时间作为ntp服务提供给ntp客户端。
server 127.127.1.0
fudge 127.127.1.0 stratum 8

在ntp server上重新启动ntp服务后,ntp server自身或者与其server的同步的需要一个时间段,这个过程可能是5分钟,在这个时间之内在客户端运行ntpdate命令时会产生no server suitable for synchronization found的错误。
那么如何知道何时ntp server完成了和自身同步的过程呢?
在ntp server上使用命令:
# watch ntpq -p
出现画面:
Every 2.0s: ntpq -p                                                                                                             Thu Jul 10 02:28:32 2008
     remote           refid      st t when poll reach   delay   offset jitter
==============================================================================
192.168.30.22   LOCAL(0)         8 u   22   64    1    2.113 179133.   0.001
LOCAL(0)        LOCAL(0)        10 l   21   64    1    0.000   0.000  0.001
注意LOCAL的这个就是与自身同步的ntp server。
注意reach这个值,在启动ntp server服务后,这个值就从0开始不断增加,当增加到17的时候,从0到17是5次的变更,每一次是poll的值的秒数,是64秒*5=320秒的时间。
如果之后从ntp客户端同步ntp server还失败的话,用ntpdate –d来查询详细错误信息,再做判断。
错误2.Server dropped: no data
从客户端执行netdate –d时有错误信息如下:
transmit(192.168.30.22) transmit(192.168.30.22)
transmit(192.168.30.22)
transmit(192.168.30.22)
transmit(192.168.30.22)
192.168.30.22: Server dropped: no data
server 192.168.30.22, port 123
.....
28 Jul 17:42:24 ntpdate[14148]: no server suitable for synchronization found出现这个问题的原因可能有2:
1。检查ntp的版本,如果你使用的是ntp4.2(包括4.2)之后的版本,在restrict的定义中使用了notrust的话,会导致以上错误。
使用以下命令检查ntp的版本:
# ntpq -c version
下面是来自ntp官方网站的说明:
The behavior of notrust changed between versions 4.1 and 4.2.
In 4.1 (and earlier) notrust meant "Don't trust this host/subnet for time".
In 4.2 (and later) notrust means "Ignore all NTP packets that are not cryptographically authenticated." This forces remote time servers to authenticate themselves to your (client) ntpd
解决:
把notrust去掉。
2。检查ntp server的防火墙。可能是server的防火墙屏蔽了upd 123端口。
可以用命令
#service iptables stop

来关掉iptables服务后再尝试从ntp客户端的同步,如果成功,证明是防火墙的问题,需要更改iptables的设置。

posted @ 2018-01-08 16:08  追逐新梦想  阅读(354)  评论(0编辑  收藏  举报