drf框架中jwt认证,以及自定义jwt认证

drf框架中jwt

一.模块的安装

官方:http://getblimp.github.io/django-rest-framework-jwt/

他是个第三方的开源项目

安装:pip install djangorestframework-jwt

使用自带设定好的jwt

from django.urls import path
from rest_framework_jwt.views import obtain_jwt_token
urlpatterns = [
    path('login/', obtain_jwt_token),
]
'''
path('login/', obtain_jwt_token)其实相当于path('login/', ObtainJSONWebToken.as_view())
因为我们之间进源码可以看到
obtain_jwt_token = ObtainJSONWebToken.as_view()     #获得
refresh_jwt_token = RefreshJSONWebToken.as_view()   #刷新
verify_jwt_token = VerifyJSONWebToken.as_view()     #验证
'''

测试接口:post请求

"""
postman发生post请求

接口:http://api.luffy.cn:8000/user/login/

数据:
{
	"username":"admin",
	"password":"admin"
}
"""

二.工作原理

"""
jwt:json web tokens 采用json格式在web上传输的 认证字符串

jwt字符串:头.载荷.签名

头:公司基本信息、项目组基本信息、常规加密算法名
载荷:用户信息、过期时间
签名:头、载荷、秘钥

{头信息字典,采用base64加密算法}.{载荷信息字典,采用base64加密(base64编码)}.{头加密串、载荷加密串、服务器秘钥,采用hs256加密算法}

base64是可逆的
hash256是不可逆加密
我们一般只会将账号信息,过期时间放载荷里面,一般把密码什么重要信息丢签名里面
"""

三.三大认证

authentication(账号认证)

"""
系统:session认证
rest_framework.authentication.SessionAuthentication
ajax请求通过认证:
cookie中要携带 sessionid、csrftoken,请求头中要携带 x-csrftoken

第三方:jwt认证 
rest_framework_jwt.authentication.JSONWebTokenAuthentication
ajax请求通过认证:
请求头中要携带 authorization,值为 jwt空格token

自定义:基于jwt、其它
1)自定义认证类,继承BaseAuthentication(或其子类),重写authenticate
2)authenticate中完成
	拿到认证标识 auth
	反解析出用户 user
	前两步操作失败 返回None => 游客
	前两步操作成功 返回user,auth => 登录用户
	注:如果在某个分支抛出异常,直接定义失败 => 非法用户
"""

permission(权限认证)

"""
系统:
1)AllowAny:允许所有用户,校验方法直接返回True
2)IsAuthenticated:只允许登录用户
	必须request.user和request.user.is_authenticated都通过
3)IsAuthenticatedOrReadOnly:游客只读,登录用户无限制
	get、option、head 请求无限制
	前台请求必须校验 request.user和request.user.is_authenticated
4)IsAdminUser:是否是后台用户
	校验 request.user和request.user.is_staff    is_staff(可以登录后台管理系统的用户)
	

自定义:基于auth的Group与Permission表
1)自定义权限类,继承BasePermission,重写has_permission
2)has_permission中完成
	拿到登录用户 user <= request.user
	校验user的分组或是权限
	前两步操作失败 返回False => 无权限
	前两步操作成功 返回True => 有权限
"""

throttle(访问频率)

"""
系统:
1)AnonRateThrottle:对同一IP游客的限制
2)UserRateThrottle:对同一IP登录用户的限制
必须在settings.py中
'DEFAULT_THROTTLE_RATES': {
    'user': '10/min',  # 登录的用户一分钟可以访问10次
    'anon': '3/min',  # 游客一分钟可以访问3次
}
在视图类中:
class TempAPIView(APIView):
	...
	throttle_classes = [AnonRateThrottle, UserRateThrottle]
	
	

自定义:基于auth的Group与Permission表
1)自定义频率类,继承SimpleRateThrottle,重写get_cache_key,明确scope
	SimpleRateThrottle已经帮我们实现了 allow_request、wait
2)scope与settings.py的DEFAULT_THROTTLE_RATES配合使用
3)get_cache_key中完成
	拿到限制信息 ident <= request中获取
	没有限制信息 返回None => 不限制
	有限制信息 返回限制信息字符串 => 有限制
"""

四.自定义认证,基于jwt

其实就是在jwt的源码基础上进行相关的修改

最简单的修改

from rest_framework.exceptions import AuthenticationFailed
import jwt
from rest_framework_jwt.authentication import BaseJSONWebTokenAuthentication
from rest_framework_jwt.authentication import jwt_decode_handler

from rest_framework.authentication import BaseAuthentication
def authenticate(self, request):
    auth = 从request中得到
    user = 从auth中得到
    if not user:
        return None
    return user, auth

如果我们自定制了一个权限我们进行全局设置必须自己在setting把这个函数加进去

REST_FRAMEWORK = {
'DEFAULT_AUTHENTICATION_CLASSES': [
    	# django默认session校验:校验规则 游客 及 登录用户
        # 'rest_framework.authentication.SessionAuthentication',
        # 'rest_framework.authentication.BasicAuthentication',
        # 'rest_framework_jwt.authentication.JSONWebTokenAuthentication',
],
}

我们做局部设置就在我们自定义的类中添加

authentication_classes = [我们自定义认证函数的对象]

五.自定义权限相关

也是改源码

"""
系统:
1)AllowAny:允许所有用户,校验方法直接返回True
2)IsAuthenticated:只允许登录用户
	必须request.user和request.user.is_authenticated都通过
3)IsAuthenticatedOrReadOnly:游客只读,登录用户无限制
	get、option、head 请求无限制
	前台请求必须校验 request.user和request.user.is_authenticated
4)IsAdminUser:是否是后台用户
	校验 request.user和request.user.is_staff    is_staff(可以登录后台管理系统的用户)
	

自定义:基于auth的Group与Permission表
1)自定义权限类,继承BasePermission,重写has_permission
2)has_permission中完成
	拿到登录用户 user <= request.user
	校验user的分组或是权限
	前两步操作失败 返回False => 无权限
	前两步操作成功 返回True => 有权限
"""
#根据用户分组信息设置相关权限
from rest_framework.permissions import BasePermission

class AdminPermission(BasePermission):
    # 继承BasePermission,重写has_permission
    def has_permission(self, request, view):
        # 有权限,返回True
        # 无权限,返回False
        user = request.user
        if not user:
            return False
        # 用户是 管理员 分组 (管理员分组是Group表中的一条自定义记录)
        if not user.groups.filter(name='管理员'):
            return False
        # 登录的用户必须是自定义管理员分组成员
        return True

如果我们自定制了一个权限全局设置我们必须自己在setting把这个函数加进去

自定义类的路径api.authentications.JWTAuthentication

#自定义一个权限

from rest_framework.authentication import BaseAuthentication
from rest_framework.exceptions import AuthenticationFailed
import jwt
from rest_framework_jwt.authentication import BaseJSONWebTokenAuthentication
from rest_framework_jwt.authentication import jwt_decode_handler

class JWTAuthentication(BaseJSONWebTokenAuthentication):
    # 自定义认证类,重写authenticate方法
    def authenticate(self, request):
        # 认证通过,返回user,auth
        # 认证失败,返回None
        auth = request.META.get('HTTP_AUTH')  # 前台用auth携带token
        if not auth:
            return None

        try:
            payload = jwt_decode_handler(auth)

        # 出现jwt解析异常,直接抛出异常,代表非法用户,也可以返回None,作为游客处理
        except jwt.ExpiredSignature:
            raise AuthenticationFailed('token已过期')
        except:
            raise AuthenticationFailed('token非法')

        user = self.authenticate_credentials(payload)
        return (user, auth)
REST_FRAMEWORK = {
        'DEFAULT_AUTHENTICATION_CLASSES': [
        # '我们自定义权限函数的路径',
        'api.authentications.JWTAuthentication',
    ],
'DEFAULT_PERMISSION_CLASSES': [
    # 'rest_framework.permissions.AllowAny',
    # 全局配置:一站式网站(所有操作都需要登录后才能访问)
    # 'rest_framework.permissions.IsAuthenticated',

],
}

我们做局部设置就在我们自定义的类中添加

permission_classes = [我们自定义认证函数的对象]

六.自定义访问次数设置

"""
系统:
1)AnonRateThrottle:对同一IP游客的限制
2)UserRateThrottle:对同一IP登录用户的限制
必须在settings.py中
REST_FRAMEWORK = {
'DEFAULT_THROTTLE_RATES': {
    'user': '10/min',  # 登录的用户一分钟可以访问10次
    'anon': '3/min',  # 游客一分钟可以访问3次
}
}
在视图类中:
class TempAPIView(APIView):
	...
	throttle_classes = [AnonRateThrottle, UserRateThrottle]

自定义:基于auth的Group与Permission表
1)自定义频率类,继承SimpleRateThrottle,重写get_cache_key,明确scope
	SimpleRateThrottle已经帮我们实现了 allow_request、wait
2)scope与settings.py的DEFAULT_THROTTLE_RATES配合使用
3)get_cache_key中完成
	拿到限制信息 ident <= request中获取
	没有限制信息 返回None => 不限制
	有限制信息 返回限制信息字符串 => 有限制
"""

自定义频率类:一分钟一个手机号只允许访问一次接口

from rest_framework.throttling import SimpleRateThrottle

class ThreeMinRateThrottle(SimpleRateThrottle):
    scope = 'sms'
    def get_cache_key(self, request, view):
        # 对手机号频率限制
        ident = request.data.get('mobile')
        if not ident:  # 为发现限制条件,返回None代表不进行频率限制
            return None
        return self.cache_format % {
            'scope': self.scope,
            'ident': ident
        }
# settings.py 
REST_FRAMEWORK = {
'DEFAULT_THROTTLE_RATES': {
    'user': '10/min',  # 登录的用户一分钟可以访问10次 如果是
    'anon': '3/min',  # 游客一分钟可以访问3次
    'sms': '1/min',  #是我们自定义的,默认只提供user以及anon
}
}
在视图层
class UserListAPIView(ListAPIView):
    throttle_classes = [我们自定义的方法路径]

源码里关于时间的一段代码

    def parse_rate(self, rate):
        """
        Given the request rate string, return a two tuple of:
        <allowed number of requests>, <period of time in seconds>
        """
        if rate is None:
            return (None, None)
        num, period = rate.split('/')
        num_requests = int(num)
        duration = {'s': 1, 'm': 60, 'h': 3600, 'd': 86400}[period[0]]
        return (num_requests, duration)

这里我们可以看出来是先/进行字符串切分然后取第一个字母所有我们这边不一定用min代表分,只要开头是m即可

七.全局设置有效时间以及jwt的名称

import datetime
JWT_AUTH = {
    'JWT_EXPIRATION_DELTA': datetime.timedelta(seconds=30000),#d到期时间
    'JWT_AUTH_HEADER_PREFIX': 'TOKEN',  #我们传参数的时候开头自定义内容,注意点这里必须与下面的token中以宫格隔开
}

源码中为

USER_SETTINGS = getattr(settings, 'JWT_AUTH', None)  #他是通过JWT_AUTH这个名字
......
'JWT_EXPIRATION_DELTA': datetime.timedelta(seconds=300),
'JWT_AUTH_HEADER_PREFIX': 'JWT',  系统默认以jwt开头

八.关于jwt自定制获取token

源码在rest_framework_jwt.seriallizers.py中JSONWebTokenSerializer类

payload = jwt_payload_handler(user)

return {
    'token': jwt_encode_handler(payload),
    'user': user
}

我们如果自定义有几个关键点把握就好了一个是jwt_payload_handler的方法

一个是 user对象

所有如果我们要在登入的时候抛出token

import re
from utils.response import APIResponse
from rest_framework_jwt.serializers import jwt_encode_handler, jwt_payload_handler
class LoginJWTAPIView(APIView):
    authentication_classes = ()
    permission_classes = ()
    def post(self, request, *args, **kwargs):
        # username可能携带的不止是用户名,可能还是用户的其它唯一标识 手机号 邮箱
        username = request.data.get('username')
        password = request.data.get('password')

        # 如果username匹配上手机号正则 => 可能是手机登录
        if re.match(r'1[3-9][0-9]{9}', username):
            try:
                # 手动通过 user 签发 jwt-token
                user = models.User.objects.get(mobile=username)
            except:
                return APIResponse(1, '该手机未注册')

        # 邮箱登录 等

        # 账号登录
        else:
            try:
                # 手动通过 user 签发 jwt-token
                user = models.User.objects.get(username=username)
            except:
                return APIResponse(1, '该账号未注册')

        # 获得用户后,校验密码并签发token
        if not user.check_password(password):
            return APIResponse(1, '密码错误')
        payload = jwt_payload_handler(user)
        token = jwt_encode_handler(payload)
        return APIResponse(0, 'ok', results={
            'username': user.username,
            'mobile': user.mobile,
            'token': token
        })

九.有效期设置

# settings.py 
# jwt配置
import datetime
JWT_AUTH = {
    'JWT_EXPIRATION_DELTA': datetime.timedelta(seconds=30000),
    'JWT_AUTH_HEADER_PREFIX': 'TOKEN',
}
posted @ 2019-09-09 20:51  小小咸鱼YwY  阅读(3928)  评论(4编辑  收藏  举报