HP iPAQ hx2000 Pocket PC series (Windows Mobile 5.0)重启方法不同
Posted on 2007-04-06 09:02 Paker Liu 阅读(1153) 评论(0) 编辑 收藏 举报最近PPC一直有毛病,无法有效的链接同步软件,也想过很多办法.几乎要到想刷rom的地步.
最可笑的是也想到放电来回复出厂设置.但是后来才反应过来,WM5下放电是恢复不了数据的.
今天可以说是柳暗花明又一村.就在我要放弃的时候,查到了以下的消息.原来一切就那么简单而已.
Performing a Hard Reset
A hard reset stops all running applications, but does not erase any
programs or saved data. A hard reset also resets all hardware registers.
Be sure to save any unsaved data within a running application before
performing a hard reset.
To perform a hard reset:
1. Press and hold the Calendar and iTask buttons.
2. While holding down these buttons, use the stylus to lightly press the
Reset button on the bottom of the HP iPAQ for about two seconds.
3. When the HP iPAQ screen begins to fade, release the Calendar
and iTask buttons first, and then remove the stylus from the Reset
button.
4. Plug the device into the AC Adapter or press the Reset button
again.
The HP iPAQ resets and powers on.
Performing a Clean Reset
A clean reset clears all user-installed settings, programs, and data, and it
restores your HP iPAQ to factory settings.
To perform a clean reset and return your HP iPAQ to factory settings:
1. Press and hold the Calendar, Power, and Messaging buttons.
2. While holding down these buttons, use the stylus to lightly press the
Reset button on the bottom of the HP iPAQ until the device
restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then
remove the stylus from the Reset button.
The HP iPAQ restarts and powers on.
A hard reset stops all running applications, but does not erase any
programs or saved data. A hard reset also resets all hardware registers.
Be sure to save any unsaved data within a running application before
performing a hard reset.
To perform a hard reset:
1. Press and hold the Calendar and iTask buttons.
2. While holding down these buttons, use the stylus to lightly press the
Reset button on the bottom of the HP iPAQ for about two seconds.
3. When the HP iPAQ screen begins to fade, release the Calendar
and iTask buttons first, and then remove the stylus from the Reset
button.
4. Plug the device into the AC Adapter or press the Reset button
again.
The HP iPAQ resets and powers on.
Performing a Clean Reset
A clean reset clears all user-installed settings, programs, and data, and it
restores your HP iPAQ to factory settings.
To perform a clean reset and return your HP iPAQ to factory settings:
1. Press and hold the Calendar, Power, and Messaging buttons.
2. While holding down these buttons, use the stylus to lightly press the
Reset button on the bottom of the HP iPAQ until the device
restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then
remove the stylus from the Reset button.
The HP iPAQ restarts and powers on.
原来除了hard reset模式还有个clean reset模式,真是众里寻他千百度啊.
