miketwais

work up

iredmail中fail2ban的设置

iredmail中fail2ban的设置

fail2ban是一款实用软件,可以监视你的系统日志,然后匹配日志的错误信息(正则式匹配)执行相应的屏蔽动作。

功能和特性编辑
1、支持大量服务。如sshd,apache,qmail,proftpd,sasl等等
2、支持多种动作。如iptables,tcp-wrapper,shorewall(iptables第三方工具),mail notifications(邮件通知)等等。
3、在logpath选项中支持通配符
4、需要Gamin支持(注:Gamin是用于监视文件和目录是否更改的服务工具)
5、需要安装python,iptables,tcp-wrapper,shorewall,Gamin。如果想要发邮件,那必需安装postfix或sendmail


在iredmail中设置fail2ban:

cd /etc/fail2ban/

文件结构:

├── action.d
│ ├── dummy.conf
│ ├── hostsdeny.conf
│ ├── iptables.conf
│ ├── mail-whois.conf
│ ├── mail.conf
│ └── shorewall.conf
├── fail2ban.conf
├── fail2ban.local
├── filter.d
│ ├── apache-auth.conf
│ ├── apache-noscript.conf
│ ├── couriersmtp.conf
│ ├── postfix.conf
│ ├── proftpd.conf
│ ├── qmail.conf
│ ├── sasl.conf
│ ├── sshd.conf
│ └── vsftpd.conf
├── jail.conf
└── jail.local
每一个.conf文件都对应一个同名的.local文件,软件将先读取.conf文件,再读取对应的.local文件,.local文件会覆盖.conf文件中同名的配置。
官网下载的最新版本iredmail中都是自动集成安装了fail2ban的,所以不需要自己安装。

我们直接看各个配置文件:
fail2ban.conf


# Fail2Ban main configuration file
#
# Comments: use '#' for comment lines and ';' (following a space) for inline comments
#
# Changes: in most of the cases you should not modify this
# file, but provide customizations in fail2ban.local file, e.g.:
#
# [Definition]
# loglevel = DEBUG
#

[Definition]

# Option: loglevel
# Notes.: Set the log level output.
# CRITICAL
# ERROR
# WARNING
# NOTICE
# INFO
# DEBUG
# Values: [ LEVEL ] Default: ERROR
#
loglevel = INFO

# Option: logtarget
# Notes.: Set the log target. This could be a file, SYSLOG, STDERR or STDOUT.
# Only one log target can be specified.
# If you change logtarget from the default value and you are
# using logrotate -- also adjust or disable rotation in the
# corresponding configuration file
# (e.g. /etc/logrotate.d/fail2ban on Debian systems)
# Values: [ STDOUT | STDERR | SYSLOG | FILE ] Default: STDERR
#
#logtarget = SYSLOG
#自定义安装目录
logtarget = /home/opt/iredmail/log/maillog/fail2ban.log
# Option: syslogsocket
# Notes: Set the syslog socket file. Only used when logtarget is SYSLOG
# auto uses platform.system() to determine predefined paths
# Values: [ auto | FILE ] Default: auto
syslogsocket = auto

# Option: socket
# Notes.: Set the socket file. This is used to communicate with the daemon. Do
# not remove this file when Fail2ban runs. It will not be possible to
# communicate with the server afterwards.
# Values: [ FILE ] Default: /var/run/fail2ban/fail2ban.sock
#
socket = /var/run/fail2ban/fail2ban.sock

# Option: pidfile
# Notes.: Set the PID file. This is used to store the process ID of the
# fail2ban server.
# Values: [ FILE ] Default: /var/run/fail2ban/fail2ban.pid
#
pidfile = /var/run/fail2ban/fail2ban.pid

# Options: dbfile
# Notes.: Set the file for the fail2ban persistent data to be stored.
# A value of ":memory:" means database is only stored in memory
# and data is lost when fail2ban is stopped.
# A value of "None" disables the database.
# Values: [ None :memory: FILE ] Default: /var/lib/fail2ban/fail2ban.sqlite3
dbfile = /var/lib/fail2ban/fail2ban.sqlite3

# Options: dbpurgeage
# Notes.: Sets age at which bans should be purged from the database
# Values: [ SECONDS ] Default: 86400 (24hours)
dbpurgeage = 86400


jail.conf


#
# WARNING: heavily refactored in 0.9.0 release. Please review and
# customize settings for your setup.
#
# Changes: in most of the cases you should not modify this
# file, but provide customizations in jail.local file,
# or separate .conf files under jail.d/ directory, e.g.:
#
# HOW TO ACTIVATE JAILS:
#
# YOU SHOULD NOT MODIFY THIS FILE.
#
# It will probably be overwritten or improved in a distribution update.
#
# Provide customizations in a jail.local file or a jail.d/customisation.local.
# For example to change the default bantime for all jails and to enable the
# ssh-iptables jail the following (uncommented) would appear in the .local file.
# See man 5 jail.conf for details.
#
# [DEFAULT]
# bantime = 3600
#
# [sshd]
# enabled = true
#
# See jail.conf(5) man page for more information

 

# Comments: use '#' for comment lines and ';' (following a space) for inline comments


[INCLUDES]

#before = paths-distro.conf
before = paths-fedora.conf

# The DEFAULT allows a global definition of the options. They can be overridden
# in each jail afterwards.

[DEFAULT]
#起作用的在这一段
#
# MISCELLANEOUS OPTIONS
#

# "ignoreip" can be an IP address, a CIDR mask or a DNS host. Fail2ban will not
# ban a host which matches an address in this list. Several addresses can be
# defined using space (and/or comma) separator.
ignoreip = 127.0.0.1/8

# External command that will take an tagged arguments to ignore, e.g. <ip>,
# and return true if the IP is to be ignored. False otherwise.
#
# ignorecommand = /path/to/command <ip>
ignorecommand =

# "bantime" is the number of seconds that a host is banned.
bantime = 600

# A host is banned if it has generated "maxretry" during the last "findtime"
# seconds.
findtime = 600

# "maxretry" is the number of failures before a host get banned.
maxretry = 5

# "backend" specifies the backend used to get files modification.
# Available options are "pyinotify", "gamin", "polling", "systemd" and "auto".
# This option can be overridden in each jail as well.
#
# pyinotify: requires pyinotify (a file alteration monitor) to be installed.
# If pyinotify is not installed, Fail2ban will use auto.
# gamin: requires Gamin (a file alteration monitor) to be installed.
# If Gamin is not installed, Fail2ban will use auto.
# polling: uses a polling algorithm which does not require external libraries.
# systemd: uses systemd python library to access the systemd journal.
# Specifying "logpath" is not valid for this backend.
# See "journalmatch" in the jails associated filter config
# auto: will try to use the following backends, in order:
# pyinotify, gamin, polling.
#
# Note: if systemd backend is chosen as the default but you enable a jail
# for which logs are present only in its own log files, specify some other
# backend for that jail (e.g. polling) and provide empty value for
# journalmatch. See https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200
backend = auto

# "usedns" specifies if jails should trust hostnames in logs,
# warn when DNS lookups are performed, or ignore all hostnames in logs
#
# yes: if a hostname is encountered, a DNS lookup will be performed.
# warn: if a hostname is encountered, a DNS lookup will be performed,
# but it will be logged as a warning.
# no: if a hostname is encountered, will not be used for banning,
# but it will be logged as info.
usedns = warn

# "logencoding" specifies the encoding of the log files handled by the jail
# This is used to decode the lines from the log file.
# Typical examples: "ascii", "utf-8"
#
# auto: will use the system locale setting
logencoding = auto

# "enabled" enables the jails.
# By default all jails are disabled, and it should stay this way.
# Enable only relevant to your setup jails in your .local or jail.d/*.conf
#
# true: jail will be enabled and log files will get monitored for changes
# false: jail is not enabled
enabled = false
#enabled = true

# "filter" defines the filter to use by the jail.
# By default jails have names matching their filter name
#
filter = %(__name__)s


#
# ACTIONS
#

# Some options used for actions

# Destination email address used solely for the interpolations in
# jail.{conf,local,d/*} configuration files.
destemail = root@localhost

# Sender email address used solely for some actions
sender = root@localhost

# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the
# mailing. Change mta configuration parameter to mail if you want to
# revert to conventional 'mail'.
mta = sendmail

# Default protocol
protocol = tcp

# Specify chain where jumps would need to be added in iptables-* actions
chain = INPUT

# Ports to be banned
# Usually should be overridden in a particular jail
port = 0:65535

# Format of user-agent https://tools.ietf.org/html/rfc7231#section-5.5.3
fail2ban_agent = Fail2Ban/%(fail2ban_version)s

#
# Action shortcuts. To be used to define action parameter

# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define
# action_* variables. Can be overridden globally or per
# section within jail.local file
banaction = iptables-multiport
banaction_allports = iptables-allports

# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]

# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]

# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]

# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action
#
# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines
# to the destemail.
action_xarf = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath=%(logpath)s, port="%(port)s"]

# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines
# to the destemail.
action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"]
%(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]

# Report block via blocklist.de fail2ban reporting service API
#
# See the IMPORTANT note in action.d/blocklist_de.conf for when to
# use this action. Create a file jail.d/blocklist_de.local containing
# [Init]
# blocklist_de_apikey = {api key from registration]
#
action_blocklist_de = blocklist_de[email="%(sender)s", service=%(filter)s, apikey="%(blocklist_de_apikey)s", agent="%(fail2ban_agent)s"]

# Report ban via badips.com, and use as blacklist
#
# See BadIPsAction docstring in config/action.d/badips.py for
# documentation for this action.
#
# NOTE: This action relies on banaction being present on start and therefore
# should be last action defined for a jail.
#
action_badips = badips.py[category="%(__name__)s", banaction="%(banaction)s", agent="%(fail2ban_agent)s"]
#
# Report ban via badips.com (uses action.d/badips.conf for reporting only)
#
action_badips_report = badips[category="%(__name__)s", agent="%(fail2ban_agent)s"]

# Choose default action. To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section
action = %(action_)s


#
# JAILS
#

#
# SSH servers
#

[sshd]

port = ssh
logpath = %(sshd_log)s
backend = %(sshd_backend)s


[sshd-ddos]
# This jail corresponds to the standard configuration in Fail2ban.
# The mail-whois action send a notification e-mail with a whois request
# in the body.
port = ssh
logpath = %(sshd_log)s
backend = %(sshd_backend)s


[dropbear]

port = ssh
logpath = %(dropbear_log)s
backend = %(dropbear_backend)s


[selinux-ssh]

port = ssh
logpath = %(auditd_log)s


#
# HTTP servers
#

[apache-auth]

port = http,https
logpath = %(apache_error_log)s


[apache-badbots]
# Ban hosts which agent identifies spammer robots crawling the web
# for email addresses. The mail outputs are buffered.
port = http,https
logpath = %(apache_access_log)s
bantime = 172800
maxretry = 1


[apache-noscript]

port = http,https
logpath = %(apache_error_log)s


[apache-overflows]

port = http,https
logpath = %(apache_error_log)s
maxretry = 2


[apache-nohome]

port = http,https
logpath = %(apache_error_log)s
maxretry = 2


[apache-botsearch]

port = http,https
logpath = %(apache_error_log)s
maxretry = 2


[apache-fakegooglebot]

port = http,https
logpath = %(apache_access_log)s
maxretry = 1
ignorecommand = %(ignorecommands_dir)s/apache-fakegooglebot <ip>


[apache-modsecurity]

port = http,https
logpath = %(apache_error_log)s
maxretry = 2


[apache-shellshock]

port = http,https
logpath = %(apache_error_log)s
maxretry = 1


[openhab-auth]

filter = openhab
action = iptables-allports[name=NoAuthFailures]
logpath = /opt/openhab/logs/request.log


[nginx-http-auth]

port = http,https
logpath = %(nginx_error_log)s

# To use 'nginx-limit-req' jail you should have `ngx_http_limit_req_module`
# and define `limit_req` and `limit_req_zone` as described in nginx documentation
# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html
# or for example see in 'config/filter.d/nginx-limit-req.conf'
[nginx-limit-req]
port = http,https
logpath = %(nginx_error_log)s

[nginx-botsearch]

port = http,https
logpath = %(nginx_error_log)s
maxretry = 2


# Ban attackers that try to use PHP's URL-fopen() functionality
# through GET/POST variables. - Experimental, with more than a year
# of usage in production environments.

[php-url-fopen]

port = http,https
logpath = %(nginx_access_log)s
%(apache_access_log)s


[suhosin]

port = http,https
logpath = %(suhosin_log)s


[lighttpd-auth]
# Same as above for Apache's mod_auth
# It catches wrong authentifications
port = http,https
logpath = %(lighttpd_error_log)s


#
# Webmail and groupware servers
#

[roundcube-auth]

port = http,https
logpath = %(roundcube_errors_log)s


[openwebmail]

port = http,https
logpath = /var/log/openwebmail.log


[horde]

port = http,https
logpath = /var/log/horde/horde.log


[groupoffice]

port = http,https
logpath = /home/groupoffice/log/info.log


[sogo-auth]
# Monitor SOGo groupware server
# without proxy this would be:
# port = 20000
port = http,https
logpath = /var/log/sogo/sogo.log


[tine20]

logpath = /var/log/tine20/tine20.log
port = http,https


#
# Web Applications
#
#

[drupal-auth]

port = http,https
logpath = %(syslog_daemon)s
backend = %(syslog_backend)s

[guacamole]

port = http,https
logpath = /var/log/tomcat*/catalina.out

[monit]
#Ban clients brute-forcing the monit gui login
port = 2812
logpath = /var/log/monit


[webmin-auth]

port = 10000
logpath = %(syslog_authpriv)s
backend = %(syslog_backend)s


[froxlor-auth]

port = http,https
logpath = %(syslog_authpriv)s
backend = %(syslog_backend)s


#
# HTTP Proxy servers
#
#

[squid]

port = 80,443,3128,8080
logpath = /var/log/squid/access.log


[3proxy]

port = 3128
logpath = /var/log/3proxy.log


#
# FTP servers
#


[proftpd]

port = ftp,ftp-data,ftps,ftps-data
logpath = %(proftpd_log)s
backend = %(proftpd_backend)s


[pure-ftpd]

port = ftp,ftp-data,ftps,ftps-data
logpath = %(pureftpd_log)s
backend = %(pureftpd_backend)s


[gssftpd]

port = ftp,ftp-data,ftps,ftps-data
logpath = %(syslog_daemon)s
backend = %(syslog_backend)s


[wuftpd]

port = ftp,ftp-data,ftps,ftps-data
logpath = %(wuftpd_log)s
backend = %(wuftpd_backend)s


[vsftpd]
# or overwrite it in jails.local to be
# logpath = %(syslog_authpriv)s
# if you want to rely on PAM failed login attempts
# vsftpd's failregex should match both of those formats
port = ftp,ftp-data,ftps,ftps-data
logpath = %(vsftpd_log)s


#
# Mail servers
#

# ASSP SMTP Proxy Jail
[assp]

port = smtp,465,submission
logpath = /root/path/to/assp/logs/maillog.txt


[courier-smtp]

port = smtp,465,submission
logpath = %(syslog_mail)s
backend = %(syslog_backend)s


[postfix]

port = smtp,465,submission
logpath = %(postfix_log)s
backend = %(postfix_backend)s


[postfix-rbl]

port = smtp,465,submission
logpath = %(postfix_log)s
backend = %(postfix_backend)s
maxretry = 1


[sendmail-auth]

port = submission,465,smtp
logpath = %(syslog_mail)s
backend = %(syslog_backend)s


[sendmail-reject]

port = smtp,465,submission
logpath = %(syslog_mail)s
backend = %(syslog_backend)s


[qmail-rbl]

filter = qmail
port = smtp,465,submission
logpath = /service/qmail/log/main/current


# dovecot defaults to logging to the mail syslog facility
# but can be set by syslog_facility in the dovecot configuration.
[dovecot]

port = pop3,pop3s,imap,imaps,submission,465,sieve
logpath = %(dovecot_log)s
backend = %(dovecot_backend)s


[sieve]

port = smtp,465,submission
logpath = %(dovecot_log)s
backend = %(dovecot_backend)s


[solid-pop3d]

port = pop3,pop3s
logpath = %(solidpop3d_log)s


[exim]

port = smtp,465,submission
logpath = %(exim_main_log)s


[exim-spam]

port = smtp,465,submission
logpath = %(exim_main_log)s


[kerio]

port = imap,smtp,imaps,465
logpath = /opt/kerio/mailserver/store/logs/security.log


#
# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
# all relevant ports get banned
#

[courier-auth]

port = smtp,465,submission,imap3,imaps,pop3,pop3s
logpath = %(syslog_mail)s
backend = %(syslog_backend)s


[postfix-sasl]

port = smtp,465,submission,imap3,imaps,pop3,pop3s
# You might consider monitoring /var/log/mail.warn instead if you are
# running postfix since it would provide the same log lines at the
# "warn" level but overall at the smaller filesize.
logpath = %(postfix_log)s
backend = %(postfix_backend)s


[perdition]

port = imap3,imaps,pop3,pop3s
logpath = %(syslog_mail)s
backend = %(syslog_backend)s


[squirrelmail]

port = smtp,465,submission,imap2,imap3,imaps,pop3,pop3s,http,https,socks
logpath = /var/lib/squirrelmail/prefs/squirrelmail_access_log


[cyrus-imap]

port = imap3,imaps
logpath = %(syslog_mail)s
backend = %(syslog_backend)s


[uwimap-auth]

port = imap3,imaps
logpath = %(syslog_mail)s
backend = %(syslog_backend)s


#
#
# DNS servers
#


# !!! WARNING !!!
# Since UDP is connection-less protocol, spoofing of IP and imitation
# of illegal actions is way too simple. Thus enabling of this filter
# might provide an easy way for implementing a DoS against a chosen
# victim. See
# http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
# Please DO NOT USE this jail unless you know what you are doing.
#
# IMPORTANT: see filter.d/named-refused for instructions to enable logging
# This jail blocks UDP traffic for DNS requests.
# [named-refused-udp]
#
# filter = named-refused
# port = domain,953
# protocol = udp
# logpath = /var/log/named/security.log

# IMPORTANT: see filter.d/named-refused for instructions to enable logging
# This jail blocks TCP traffic for DNS requests.

[named-refused]

port = domain,953
logpath = /var/log/named/security.log


[nsd]

port = 53
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
logpath = /var/log/nsd.log


#
# Miscellaneous
#

[asterisk]

port = 5060,5061
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"]
logpath = /var/log/asterisk/messages
maxretry = 10


[freeswitch]

port = 5060,5061
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"]
logpath = /var/log/freeswitch.log
maxretry = 10


# To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld] or
# equivalent section:
# log-warning = 2
#
# for syslog (daemon facility)
# [mysqld_safe]
# syslog
#
# for own logfile
# [mysqld]
# log-error=/var/log/mysqld.log
[mysqld-auth]

port = 3306
logpath = %(mysql_log)s
backend = %(mysql_backend)s


# Jail for more extended banning of persistent abusers
# !!! WARNINGS !!!
# 1. Make sure that your loglevel specified in fail2ban.conf/.local
# is not at DEBUG level -- which might then cause fail2ban to fall into
# an infinite loop constantly feeding itself with non-informative lines
# 2. Increase dbpurgeage defined in fail2ban.conf to e.g. 648000 (7.5 days)
# to maintain entries for failed logins for sufficient amount of time
[recidive]

logpath = /var/log/messages
banaction = %(banaction_allports)s
bantime = 604800 ; 1 week
findtime = 86400 ; 1 day


# Generic filter for PAM. Has to be used with action which bans all
# ports such as iptables-allports, shorewall

[pam-generic]
# pam-generic filter can be customized to monitor specific subset of 'tty's
banaction = %(banaction_allports)s
logpath = %(syslog_authpriv)s
backend = %(syslog_backend)s


[xinetd-fail]

banaction = iptables-multiport-log
logpath = %(syslog_daemon)s
backend = %(syslog_backend)s
maxretry = 2


# stunnel - need to set port for this
[stunnel]

logpath = /var/log/stunnel4/stunnel.log


[ejabberd-auth]

port = 5222
logpath = /var/log/ejabberd/ejabberd.log


[counter-strike]

logpath = /opt/cstrike/logs/L[0-9]*.log
# Firewall: http://www.cstrike-planet.com/faq/6
tcpport = 27030,27031,27032,27033,27034,27035,27036,27037,27038,27039
udpport = 1200,27000,27001,27002,27003,27004,27005,27006,27007,27008,27009,27010,27011,27012,27013,27014,27015
action = %(banaction)s[name=%(__name__)s-tcp, port="%(tcpport)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(udpport)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]

# consider low maxretry and a long bantime
# nobody except your own Nagios server should ever probe nrpe
[nagios]

logpath = %(syslog_daemon)s ; nrpe.cfg may define a different log_facility
backend = %(syslog_backend)s
maxretry = 1


[oracleims]
# see "oracleims" filter file for configuration requirement for Oracle IMS v6 and above
logpath = /opt/sun/comms/messaging64/log/mail.log_current
banaction = %(banaction_allports)s

[directadmin]
logpath = /var/log/directadmin/login.log
port = 2222

[portsentry]
logpath = /var/lib/portsentry/portsentry.history
maxretry = 1

[pass2allow-ftp]
# this pass2allow example allows FTP traffic after successful HTTP authentication
port = ftp,ftp-data,ftps,ftps-data
# knocking_url variable must be overridden to some secret value in filter.d/apache-pass.local
filter = apache-pass
# access log of the website with HTTP auth
logpath = %(apache_access_log)s
blocktype = RETURN
returntype = DROP
bantime = 3600
maxretry = 1
findtime = 1


[murmur]
# AKA mumble-server
port = 64738
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol=tcp, chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol=udp, chain="%(chain)s", actname=%(banaction)s-udp]
logpath = /var/log/mumble-server/mumble-server.log


[screensharingd]
# For Mac OS Screen Sharing Service (VNC)
logpath = /var/log/system.log
logencoding = utf-8

[haproxy-http-auth]
# HAProxy by default doesn't log to file you'll need to set it up to forward
# logs to a syslog server which would then write them to disk.
# See "haproxy-http-auth" filter for a brief cautionary note when setting
# maxretry and findtime.
logpath = /var/log/haproxy.log

再看看jail.local

最后起作用的在这里


# Refer to /etc/fail2ban/jail.conf for more examples.
[DEFAULT]
# time is in seconds. 3600 = 1 hour, 86400 = 24 hours (1 day)
# 查找失败次数的时长(秒)
findtime = 3600
# 客户端主机被禁止的时长(秒)
bantime = 86400
# 客户端主机被禁止前允许失败的次数
maxretry = 5
#ignoreip = 127.0.0.1 127.0.0.0/8 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16
#add by mason zhang
#这里加入你要忽略的IP地址(后面跟上掩码位数)
#ignoreip = 127.0.0.1 127.0.0.0/8 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16
#add by mason zhang
[sshd]
#hide by mason zhang
#enabled = true
#hide by mason zhang
enabled = false
filter = sshd
action = iptables-multiport[name=sshd, port="22", protocol=tcp]
logpath = /var/log/secure

[sshd-ddos]
#hide by mason zhang
#enabled = true
#hide by mason zhang
enabled = false
filter = sshd-ddos
action = iptables-multiport[name=sshd-ddos, port="22", protocol=tcp]
logpath = /var/log/secure

[roundcube-iredmail]
enabled = true
filter = roundcube.iredmail
action = iptables-multiport[name=roundcube, port="http,https,smtp,submission,pop3,pop3s,imap,imaps,sieve", protocol=tcp]
#logpath = /var/log/maillog
logpath = /home/opt/iredmail/log/maillog/maillog
findtime = 3600

[dovecot-iredmail]
enabled = true
filter = dovecot.iredmail
action = iptables-multiport[name=dovecot, port="http,https,smtp,submission,pop3,pop3s,imap,imaps,sieve", protocol=tcp]
#logpath = /var/log/dovecot.log
#监控的日志位置
logpath = /home/opt/iredmail/log/maillog/dovecot.log

[postfix-iredmail]
enabled = true
filter = postfix.iredmail
action = iptables-multiport[name=postfix, port="http,https,smtp,submission,pop3,pop3s,imap,imaps,sieve", protocol=tcp]
# sendmail[name=Postfix, dest=root, sender=fail2ban@localhost]
#logpath = /var/log/maillog
logpath = /home/opt/iredmail/log/maillog/maillog

[sogo-iredmail]
enabled = false
filter = sogo-auth
action = iptables-multiport[name=sogo, port="http,https,smtp,submission,pop3,pop3s,imap,imaps,sieve", protocol=tcp]
logpath = /var/log/sogo/sogo.log


具体过滤规则在 filter.d文件夹里面

这里的规则是:fail2ban会自动禁止在最近10分钟内有超过3次访问尝试失败的任意IP地址。一旦被禁,这个IP地址将会在24小时内一直被禁止访问 SSH 服务。


开启fail2ban服务后,使用iptables -L查看可以发现多了一些防火墙规则,这就是fail2ban在生效了。

如果发现摸个IP被禁,但是想解锁特定的IP地址:iptables -D f2b-postfix 1或者:iptables -D f2b-postfix -s 192.168.1.8 -j DROP


让fail2ban开机自动启动:

在你的服务器上让其在开机时自动启动
在 CentOS/RHEL 6中:chkconfig fail2ban on
在 Fedora 或 CentOS/RHEL 7:systemctl enable fail2ban

posted @ 2017-01-17 14:48 MasonZhang 阅读(...) 评论(...)  编辑 收藏