SFP in Cisco UCS

Posted on 2018-08-22 08:48  卖口锅  阅读(211)  评论(0)    收藏  举报
作用是什么？
used for both telecommunication and data communications applications
电信号和数据信息的转换
仅仅用以太网上
 
SFP transceivers exist supporting SONET, Gigabit Ethernet, Fibre Channel, and other communications standards. 
并不仅仅在IP网络上使用，同样会出现在光纤网络上。（FcoE)
 
在Vblock 中涉及的型号: 主要就是 SFP+
 
 
疑问：在SFP两段分别连接的信号是什么类型
光纤信号 ---SFP （Nexus）---IP信号
SFP 1 Gpbs
SFP+ 10 Gpbs
What Are The Differences Between SFP, SFP+, XFP, QSFP/QSFP+, CFP and QSFP28?
 
SFP small form-factor pluggable for short, is a compact, hot-pluggable transceiver module used for both telecommunication and data communications applications  
SFP+ SFP+ is an enhanced version of the SFP that supports data rates up to 10 Gbit/s  
QSFP/QSFP+    
 
如何在log文件和live WebEx 中查询SFP的状态？
Identify the SFP PID on both components (Fabric Interconnect, Nexus switch) with the following NX-OS command:
# show interface ethX/X transceiver details
 
EthernetX/X
    transceiver is present
    type is SFP-H10GB-CU3M   < ------- PID
    name is CISCO-TYCO
    part number is 1-2053783-2
    revision is T
    serial number is TED1825BC1B
    nominal bitrate is 10300 MBit/sec
    Link length supported for copper is 3 m
    cisco id is --
    cisco extended id number is 4
 
关键词： interface ethX/X transceiver details
 
连接在什么之上
Component Description
Cisco Nexus 5548UP Switch
  • 1 RU appliance
  • Supports 32 fixed 10 Gbps SFP+ ports
  • Expands to 48 10 Gbps SFP+ ports through an available expansion module
Cisco Nexus 5596UP Switch
  • 2 RU appliance
  • Supports 48 fixed 10 Gbps SFP+ ports
  • Expands to 96 10 Gbps SFP+ ports through three available expansion slots
Cisco Nexus 93180YC-EX
  • 1 RU appliance
  • Supports 48 fixed 10/25 Gbps SFP+ ports and 6 fixed 40/100 Gbps QSFP+ ports
  • No expansion modules available
Cisco Nexus 9396PX Switch
  • 2 RU appliance
  • Supports 48 fixed, 10 Gbps SFP+ ports and 12 fixed, 40 Gbps QSFP+ ports
  • No expansion modules available
Cisco Nexus 9332PQ Switch
  • 1 RU
  • 2.56 Tbps bandwidth that supports 32 fixed, 40 Gbps QSFP+ ports (ports 1-12 and 15-26 support QSFP+-to-10 Gbps SFP+ breakout cables and QSA adapters on the last six ports)
Cisco Nexus 3172TQ Switch
  • 1 RU appliance
  • Supports 48 fixed, 100 Mbps/1000 Mbps/10 Gbps twisted pair connectivity ports and 6 fixed, 40 Gbps QSFP+ ports for the management layer of the Converged System
Cisco Nexus 3064-T Switch
  • 1 RU appliance
  • Supports 48 fixed, 10GBase-T RJ45 ports and 4 fixed, 40 Gbps QSFP+ ports for the management layer of the Converged System
不同的SFP 对应的不同线
Connector (Media)
Cable
Distance
Power (Each Side)
Transceiver Latency (Link)
Standard
SFP+ copper (CU)
Twinax
1, 3, and 5m
Approximately 0.1 watt (W)
Approximately 0.1 microsecond
SFF 8431
SFP+ FET
MM OM2
MM OM3
MM OM4
25 and 100m
1W
Approximately 0 microseconds
IEEE 802.3ae
SFP+ short-reach 
(SR) and multimode fiber (MMF)
MM OM2
MM OM3
MM OM4
82 and 300m
1W
Approximately 0 microseconds
IEEE 802.3ae
SFP+ long-reach (LR) MMF and SR
SMF
Up to 300m over SMF
1W
Approximately 0 microseconds
IEEE 802.3ae
 
 
物理信息
Physical Specifications
SFP+ Optics
Cisco UCS products support 10 Gigabit Ethernet SFP+ copper Twinax cables for short distances and SFP+ optics for longer distances. SFP+ has several advantages compared to other 10 Gigabit Ethernet connectivity options, including:
●   Small 10 Gigabit Ethernet form factor
●   Optical interoperability with XENPAK, X2, and 10 Gigabit Small Form-Factor Pluggable (XFP) interface types
●   Low power consumption
●   Hot-swappable device
Environment
●   Physical (height x width x depth): 7.64 x 1.36 x 7.2 in
●   Operating temperature: 32 to 104°F (0 to 40°C)
●   Nonoperating temperature: -40 to 158°F (-40 to 70°C)
●   Humidity: 5 to 95% (noncondensing)
●   Altitude: 0 to 10,000 ft (0 to 3000m)
Weight
●   2.5 lb (1.134 kg); Weight similar for Cisco UCS 2208XP and 2204XP IOMs