06_手工负载分担（数通华为）

1. 网络拓扑

2. SW1配置
[SW1]vlan batch 10 20
[SW1]interface GigabitEthernet 0/0/1
[SW1-GigabitEthernet0/0/1]port link-type access
[SW1-GigabitEthernet0/0/1]port default vlan 10

[SW1]interface GigabitEthernet 0/0/2
[SW1-GigabitEthernet0/0/2]port link-type access
[SW1-GigabitEthernet0/0/2]port default vlan 20

创建一个聚合链路接口：
[SW1]interface Eth-Trunk 1
[SW1-Eth-Trunk1]mode manual load-balance
[SW1-Eth-Trunk1]port link-type trunk
[SW1-Eth-Trunk1]port trunk allow-pass vlan 10 20

将端口加入聚合：
[SW1]interface GigabitEthernet 0/0/23
[SW1-GigabitEthernet0/0/23]eth-trunk 1
[SW1]interface GigabitEthernet 0/0/24
[SW1-GigabitEthernet0/0/24]eth-trunk 1

3. SW3配置
与SW2相同配置

4. 查看配置

SW1:

SW2: