S1500 Aruba交换机升级傻瓜文档

升级软件 

新设备系统加电，console 到设备，按照下述方法升级软件 

User: admin 

Password: admin123 

(ArubaS1500-24P) >enable 

Password: enable 

Zero Touch Provisioning (Activate or DHCP based) of the system has been stopped.

Would you like to use Quick-Setup to help with the basic configuration of the system (y|n)?n 

Quick-setup dialog can be launched by executing "quick-setup" command in enable mode

(ArubaS1500-24P) #configure terminal  

Enter Configuration commands, one per line. End with CNTL/Z

(ArubaS1500-24P) (config) #mgmt-user admin root

Password:britel,123 

Re-Type password: britel,123

(ArubaS1500-24P) (config) #interface vlan 1

(ArubaS1500-24P) (vlan "1") #ip address 1.1.1.1 255.255.255.0

(ArubaS1500-24P) (vlan "1") #no shut 

(ArubaS1500-24P) (vlan "1") #end 

(ArubaS1500-24P) #

电脑手动配置 IP 为 1.1.1.2，接入交换机任意口，打开 FTP 软件配置完成目录和账号权限 ，将升级的ios 放到主目录下

(ArubaS1500-24P) #copy ftp: 1.1.1.2 ftp_username ArubaOS_MAS_7.4.1.8_59498 system: partition 1          ftp的 账号： 1

Password:1                           ftp的密码   ：1

Press 'q' to abort.

Copying file:....................................................................................

Image is signed;  

File copied successfully.

Saving file to flash:..........................................

Member-0:The system will boot from partition 1 during the next reboot.

(ArubaS1500-24P) #write memory  

Saving Configuration...

Configuration Saved.

(ArubaS1500-24P) #reload

Do you really want to restart the system(y/n)? y 

System will now restart!

….重启后….

User: admin 

Password: britel,123

(ArubaS1500-24P) >enable  

Password: enable 

(ArubaS1500-24P) #configure terminal  

Enter Configuration commands, one per line. End with CNTL/Z

(ArubaS1500-24P) (config) #interface vlan 1 

(ArubaS1500-24P) (vlan "1") #shutdown  

(ArubaS1500-24P) (vlan "1") #no ip address  

(ArubaS1500-24P) (vlan "1") #end (ArubaS1500-24P) #write memory  

Saving Configuration...

Configuration Saved.

(ArubaS1500-24P) #show ver       查看版本信息