vmware中suse10不能上网解决方法

1.在vmware中设置网络连接方式为NAT方式

2.打开Network向导，设置IP方式为DHCP方式：

suse10:/etc/sysconfig/network # yast2 network

WARNING: please edit ~/.scim/global and change /DefaultConfigModule to kconfig

3.根据提示修改

suse10:/etc/sysconfig/network # echo "/DefaultConfigModule = kconfig" >> ~/.scim/global

4.重启网络

suse10:/etc/sysconfig/network # rcnetwork start
Hint: you may set mandatory devices in /etc/sysconfig/network/config
Setting up network interfaces:
    lo
    lo        IP address: 127.0.0.1/8                                 done
    eth0      device: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)
    eth0      IP address: 192.168.49.129/24 (DHCP was already running)done
Setting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  done
5. 发现可以上网了。但是不知道上一步提示是什么意思。