CC1310 IAR仿真报错问题总结

一、Warning: Failed to halt at 0x0000BA98 after bootloader, forced stop at 0x1001BBD2

　　因为 cc1310 SW下载模式，芯片复位引脚未接出来导致，芯片复位必须和下载器保持良好连接

 二、Fatal er Filed to connect to the XDS emulator (connet lEPick)。。。

　　(Error -242 @ 0x0)
　　A router subpath could not be accessed.
　　The board configuration file is probably ncorrect

 

  　　(Emulation package 8.0.27.9)

 

　　Session aborted!

 

　

 

　　Project->option->TI XDS->Setup->Interface下选择cJTAG(2-pin),OK保存即可