enap开启远程连接

 

R1执行

　　重命名

sysname R1

　　查看接口

【R1】dis ip interface brief

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.1/24       up         up        

GigabitEthernet0/0/1              unassigned           down       down      

GigabitEthernet0/0/2              unassigned           down       down      

NULL0                             unassigned           up         up(s)

　进入接口

[R1]interface GigabitEthernet 0/0/0p

配置IP

ip addr 192.168.1.1 24

　

设置同时登录的账户数量 为5

[R1]user-interface vty 0 4

　　设置密码 123123

[R1-ui-vty0-4]set authentication password cipher 123123

　　设置远程用户的权限 1最低  15最高

[R1-ui-vty0-4]user privilege level 1

　　R2执行

配置IP

重命名
sysname R2

查接口

【R2】dis ip interface brief

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              192.168.1.2/24       up         up        

GigabitEthernet0/0/1              unassigned           down       down      

GigabitEthernet0/0/2              unassigned           down       down      

NULL0                             unassigned           up         up(s)

进入接口

[R1]interface GigabitEthernet 0/0/0p

 

配置IP：

ip addr 192.168.1.1 24

 

　　

连接R1，输入密码即可

<R2>telnet 192.168.1.1

Password:

　　R1执行

quit
退出到普通<>模式
然后save huawei.zip保存配置到文件中

　　下次开机默认使用保存好的配置文件启动

<R1>startup saved-configuration huawei.zip

　　检查开机文件配置是否成功

<R1>display startup 
MainBoard: 
  Startup system software:                   null
  Next startup system software:              null
  Backup system software for next startup:   null
  Startup saved-configuration file:          flash:/vrpcfg.zip
  Next startup saved-configuration file:     flash:/huawei.zip
  Startup license file:                      null
  Next startup license file:                 null
  Startup patch package:                     null
  Next startup patch package:                null
  Startup voice-files:                       null
  Next startup voice-files:                  null