问题:RHEL服务器,有双网卡(只用了一根网线),安装系统时手动配置仅使用eth0,使用静态IP。换网卡接口后可检测到IP,但无法连网。别人不知情。
一、mii-tool工具
#mii-tool eth0
eth0: no link
二、ethtool
# ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: Unknown! Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000001 (1) Link detected: no
三、service network status 查看活跃设备
# service network status
Configured devices:
lo eth0 eth1
Currently active devices:
lo eth1
浙公网安备 33010602011771号