Delphi使用Zxing创建二维码
效果
DelphiZXingQRCode下载地址:https://www.debenu.com/open-source/delphizxingqrcode/
为了调用方便unit DelphiZXIngQRCode增加了一个过程
procedure EncodeToImage(const text: string; const Img: TImage); procedure TDelphiZXingQRCode.EncodeToImage(const text: string; const Img: TImage); var Row, Column: Integer; BMP: TBitmap; Scale: Double; begin Data := text; BMP := TBitmap.Create; BMP.Height := Rows; BMP.Width := Columns; for Row := 0 to Rows - 1 do begin for Column := 0 to Columns - 1 do begin if (IsBlack[Row, Column]) then BMP.Canvas.Pixels[Column, Row] := clBlack else BMP.Canvas.Pixels[Column, Row] := clWhite; end; end; Img.Canvas.Brush.Color := clWhite; Img.Canvas.FillRect(Rect(0, 0, Img.Width, Img.Height)); if ((BMP.Width > 0) and (BMP.Height > 0)) then begin if (Img.Width < Img.Height) then Scale := Img.Width / BMP.Width else Scale := Img.Height / BMP.Height; Img.Canvas.StretchDraw(Rect(0, 0, Trunc(Scale * BMP.Width), Trunc(Scale * BMP.Height)), BMP); end; BMP.Free; end;
调用方式
uses DelphiZXIngQRCode; procedure TForm1.Button1Click(Sender: TObject); var zxing: TDelphiZXingQRCode; begin zxing := TDelphiZXingQRCode.Create; try //二维码外边距 zxing.QuietZone := SpinEdit1.Value; //可选值qrAuto, qrNumeric, qrAlphanumeric, qrISO88591, qrUTF8NoBOM, qrUTF8BOM zxing.Encoding := TQRCodeEncoding(ComboBox1.ItemIndex); zxing.EncodeToImage(Memo1.Text, Image1); finally zxing.Free; end; end;
DelphiZXIngQRCode.pas
unit DelphiZXIngQRCode; // ZXing QRCode port to Delphi, by Debenu Pty Ltd // www.debenu.com // Original copyright notice (* * Copyright 2008 ZXing authors * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. *) interface uses Vcl.Graphics, Vcl.ExtCtrls; type TQRCodeEncoding = (qrAuto, qrNumeric, qrAlphanumeric, qrISO88591, qrUTF8NoBOM, qrUTF8BOM); T2DBooleanArray = array of array of Boolean; TDelphiZXingQRCode = class protected FData: WideString; FRows: Integer; FColumns: Integer; FEncoding: TQRCodeEncoding; FQuietZone: Integer; FElements: T2DBooleanArray; procedure SetEncoding(NewEncoding: TQRCodeEncoding); procedure SetData(const NewData: WideString); procedure SetQuietZone(NewQuietZone: Integer); function GetIsBlack(Row, Column: Integer): Boolean; procedure Update; public constructor Create; property Data: WideString read FData write SetData; property Encoding: TQRCodeEncoding read FEncoding write SetEncoding; property QuietZone: Integer read FQuietZone write SetQuietZone; property Rows: Integer read FRows; property Columns: Integer read FColumns; property IsBlack[Row, Column: Integer]: Boolean read GetIsBlack; procedure EncodeToImage(const text: string; const Img: TImage); end; implementation uses contnrs, Math, Classes; type TByteArray = array of Byte; T2DByteArray = array of array of Byte; TIntegerArray = array of Integer; const NUM_MASK_PATTERNS = 8; QUIET_ZONE_SIZE = 4; ALPHANUMERIC_TABLE: array[0..95] of Integer = (-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // 0x00-0x0f -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // 0x10-0x1f 36, -1, -1, -1, 37, 38, -1, -1, -1, -1, 39, 40, -1, 41, 42, 43, // 0x20-0x2f 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 44, -1, -1, -1, -1, -1, // 0x30-0x3f -1, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, // 0x40-0x4f 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, -1, -1, -1, -1, -1 // 0x50-0x5f ); DEFAULT_BYTE_MODE_ENCODING = 'ISO-8859-1'; POSITION_DETECTION_PATTERN: array[0..6, 0..6] of Integer = ((1, 1, 1, 1, 1, 1, 1), (1, 0, 0, 0, 0, 0, 1), (1, 0, 1, 1, 1, 0, 1), (1, 0, 1, 1, 1, 0, 1), (1, 0, 1, 1, 1, 0, 1), (1, 0, 0, 0, 0, 0, 1), (1, 1, 1, 1, 1, 1, 1)); HORIZONTAL_SEPARATION_PATTERN: array[0..0, 0..7] of Integer = ((0, 0, 0, 0, 0, 0, 0, 0)); VERTICAL_SEPARATION_PATTERN: array[0..6, 0..0] of Integer = ((0), (0), (0), (0), (0), (0), (0)); POSITION_ADJUSTMENT_PATTERN: array[0..4, 0..4] of Integer = ((1, 1, 1, 1, 1), (1, 0, 0, 0, 1), (1, 0, 1, 0, 1), (1, 0, 0, 0, 1), (1, 1, 1, 1, 1)); // From Appendix E. Table 1, JIS0510X:2004 (p 71). The table was double-checked by komatsu. POSITION_ADJUSTMENT_PATTERN_COORDINATE_TABLE: array[0..39, 0..6] of Integer = ((-1, -1, -1, -1, -1, -1, -1), // Version 1 (6, 18, -1, -1, -1, -1, -1), // Version 2 (6, 22, -1, -1, -1, -1, -1), // Version 3 (6, 26, -1, -1, -1, -1, -1), // Version 4 (6, 30, -1, -1, -1, -1, -1), // Version 5 (6, 34, -1, -1, -1, -1, -1), // Version 6 (6, 22, 38, -1, -1, -1, -1), // Version 7 (6, 24, 42, -1, -1, -1, -1), // Version 8 (6, 26, 46, -1, -1, -1, -1), // Version 9 (6, 28, 50, -1, -1, -1, -1), // Version 10 (6, 30, 54, -1, -1, -1, -1), // Version 11 (6, 32, 58, -1, -1, -1, -1), // Version 12 (6, 34, 62, -1, -1, -1, -1), // Version 13 (6, 26, 46, 66, -1, -1, -1), // Version 14 (6, 26, 48, 70, -1, -1, -1), // Version 15 (6, 26, 50, 74, -1, -1, -1), // Version 16 (6, 30, 54, 78, -1, -1, -1), // Version 17 (6, 30, 56, 82, -1, -1, -1), // Version 18 (6, 30, 58, 86, -1, -1, -1), // Version 19 (6, 34, 62, 90, -1, -1, -1), // Version 20 (6, 28, 50, 72, 94, -1, -1), // Version 21 (6, 26, 50, 74, 98, -1, -1), // Version 22 (6, 30, 54, 78, 102, -1, -1), // Version 23 (6, 28, 54, 80, 106, -1, -1), // Version 24 (6, 32, 58, 84, 110, -1, -1), // Version 25 (6, 30, 58, 86, 114, -1, -1), // Version 26 (6, 34, 62, 90, 118, -1, -1), // Version 27 (6, 26, 50, 74, 98, 122, -1), // Version 28 (6, 30, 54, 78, 102, 126, -1), // Version 29 (6, 26, 52, 78, 104, 130, -1), // Version 30 (6, 30, 56, 82, 108, 134, -1), // Version 31 (6, 34, 60, 86, 112, 138, -1), // Version 32 (6, 30, 58, 86, 114, 142, -1), // Version 33 (6, 34, 62, 90, 118, 146, -1), // Version 34 (6, 30, 54, 78, 102, 126, 150), // Version 35 (6, 24, 50, 76, 102, 128, 154), // Version 36 (6, 28, 54, 80, 106, 132, 158), // Version 37 (6, 32, 58, 84, 110, 136, 162), // Version 38 (6, 26, 54, 82, 110, 138, 166), // Version 39 (6, 30, 58, 86, 114, 142, 170) // Version 40 ); // Type info cells at the left top corner. TYPE_INFO_COORDINATES: array[0..14, 0..1] of Integer = ((8, 0), (8, 1), (8, 2), (8, 3), (8, 4), (8, 5), (8, 7), (8, 8), (7, 8), (5, 8), (4, 8), (3, 8), (2, 8), (1, 8), (0, 8)); // From Appendix D in JISX0510:2004 (p. 67) VERSION_INFO_POLY = $1f25; // 1 1111 0010 0101 // From Appendix C in JISX0510:2004 (p.65). TYPE_INFO_POLY = $537; TYPE_INFO_MASK_PATTERN = $5412; VERSION_DECODE_INFO: array[0..33] of Integer = ($07C94, $085BC, $09A99, $0A4D3, $0BBF6, $0C762, $0D847, $0E60D, $0F928, $10B78, $1145D, $12A17, $13532, $149A6, $15683, $168C9, $177EC, $18EC4, $191E1, $1AFAB, $1B08E, $1CC1A, $1D33F, $1ED75, $1F250, $209D5, $216F0, $228BA, $2379F, $24B0B, $2542E, $26A64, $27541, $28C69); type TMode = (qmTerminator, qmNumeric, qmAlphanumeric, qmStructuredAppend, qmByte, qmECI, qmKanji, qmFNC1FirstPosition, qmFNC1SecondPosition, qmHanzi); const ModeCharacterCountBits: array[TMode] of array[0..2] of Integer = ((0, 0, 0), (10, 12, 14), (9, 11, 13), (0, 0, 0), (8, 16, 16), (0, 0, 0), (8, 10, 12), (0, 0, 0), (0, 0, 0), (8, 10, 12)); ModeBits: array[TMode] of Integer = (0, 1, 2, 3, 4, 7, 8, 5, 9, 13); type TErrorCorrectionLevel = class private FBits: Integer; public procedure Assign(Source: TErrorCorrectionLevel); function Ordinal: Integer; property Bits: Integer read FBits; end; TECB = class private Count: Integer; DataCodewords: Integer; public constructor Create(Count, DataCodewords: Integer); function GetCount: Integer; function GetDataCodewords: Integer; end; TECBArray = array of TECB; TECBlocks = class private ECCodewordsPerBlock: Integer; ECBlocks: TECBArray; public constructor Create(ECCodewordsPerBlock: Integer; ECBlocks: TECB); overload; constructor Create(ECCodewordsPerBlock: Integer; ECBlocks1, ECBlocks2: TECB); overload; destructor Destroy; override; function GetTotalECCodewords: Integer; function GetNumBlocks: Integer; function GetECCodewordsPerBlock: Integer; function GetECBlocks: TECBArray; end; TByteMatrix = class protected Bytes: T2DByteArray; FWidth: Integer; FHeight: Integer; public constructor Create(Width, Height: Integer); function Get(X, Y: Integer): Integer; procedure SetBoolean(X, Y: Integer; Value: Boolean); procedure SetInteger(X, Y: Integer; Value: Integer); function GetArray: T2DByteArray; procedure Assign(Source: TByteMatrix); procedure Clear(Value: Byte); function Hash: AnsiString; property Width: Integer read FWidth; property Height: Integer read FHeight; end; TBitArray = class private Bits: array of Integer; Size: Integer; procedure EnsureCapacity(Size: Integer); public constructor Create; overload; constructor Create(Size: Integer); overload; function GetSizeInBytes: Integer; function GetSize: Integer; function Get(I: Integer): Boolean; procedure SetBit(Index: Integer); procedure AppendBit(Bit: Boolean); procedure AppendBits(Value, NumBits: Integer); procedure AppendBitArray(NewBitArray: TBitArray); procedure ToBytes(BitOffset: Integer; Source: TByteArray; Offset, NumBytes: Integer); procedure XorOperation(Other: TBitArray); end; TCharacterSetECI = class end; TVersion = class private VersionNumber: Integer; AlignmentPatternCenters: array of Integer; ECBlocks: array of TECBlocks; TotalCodewords: Integer; ECCodewords: Integer; public constructor Create(VersionNumber: Integer; AlignmentPatternCenters: array of Integer; ECBlocks1, ECBlocks2, ECBlocks3, ECBlocks4: TECBlocks); destructor Destroy; override; class function GetVersionForNumber(VersionNum: Integer): TVersion; class function ChooseVersion(NumInputBits: Integer; ecLevel: TErrorCorrectionLevel): TVersion; function GetTotalCodewords: Integer; function GetECBlocksForLevel(ECLevel: TErrorCorrectionLevel): TECBlocks; function GetDimensionForVersion: Integer; end; TMaskUtil = class public function GetDataMaskBit(MaskPattern, X, Y: Integer): Boolean; end; TQRCode = class private FMode: TMode; FECLevel: TErrorCorrectionLevel; FVersion: Integer; FMatrixWidth: Integer; FMaskPattern: Integer; FNumTotalBytes: Integer; FNumDataBytes: Integer; FNumECBytes: Integer; FNumRSBlocks: Integer; FMatrix: TByteMatrix; FQRCodeError: Boolean; public constructor Create; destructor Destroy; override; function At(X, Y: Integer): Integer; function IsValid: Boolean; function IsValidMaskPattern(MaskPattern: Integer): Boolean; procedure SetMatrix(NewMatrix: TByteMatrix); procedure SetECLevel(NewECLevel: TErrorCorrectionLevel); procedure SetAll(VersionNum, NumBytes, NumDataBytes, NumRSBlocks, NumECBytes, MatrixWidth: Integer); property QRCodeError: Boolean read FQRCodeError; property Mode: TMode read FMode write FMode; property Version: Integer read FVersion write FVersion; property NumDataBytes: Integer read FNumDataBytes; property NumTotalBytes: Integer read FNumTotalBytes; property NumRSBlocks: Integer read FNumRSBlocks; property MatrixWidth: Integer read FMatrixWidth; property MaskPattern: Integer read FMaskPattern write FMaskPattern; property ECLevel: TErrorCorrectionLevel read FECLevel; end; TMatrixUtil = class private FMatrixUtilError: Boolean; procedure ClearMatrix(Matrix: TByteMatrix); procedure EmbedBasicPatterns(Version: Integer; Matrix: TByteMatrix); procedure EmbedTypeInfo(ECLevel: TErrorCorrectionLevel; MaskPattern: Integer; Matrix: TByteMatrix); procedure MaybeEmbedVersionInfo(Version: Integer; Matrix: TByteMatrix); procedure EmbedDataBits(DataBits: TBitArray; MaskPattern: Integer; Matrix: TByteMatrix); function FindMSBSet(Value: Integer): Integer; function CalculateBCHCode(Value, Poly: Integer): Integer; procedure MakeTypeInfoBits(ECLevel: TErrorCorrectionLevel; MaskPattern: Integer; Bits: TBitArray); procedure MakeVersionInfoBits(Version: Integer; Bits: TBitArray); function IsEmpty(Value: Integer): Boolean; procedure EmbedTimingPatterns(Matrix: TByteMatrix); procedure EmbedDarkDotAtLeftBottomCorner(Matrix: TByteMatrix); procedure EmbedHorizontalSeparationPattern(XStart, YStart: Integer; Matrix: TByteMatrix); procedure EmbedVerticalSeparationPattern(XStart, YStart: Integer; Matrix: TByteMatrix); procedure EmbedPositionAdjustmentPattern(XStart, YStart: Integer; Matrix: TByteMatrix); procedure EmbedPositionDetectionPattern(XStart, YStart: Integer; Matrix: TByteMatrix); procedure EmbedPositionDetectionPatternsAndSeparators(Matrix: TByteMatrix); procedure MaybeEmbedPositionAdjustmentPatterns(Version: Integer; Matrix: TByteMatrix); public constructor Create; property MatrixUtilError: Boolean read FMatrixUtilError; procedure BuildMatrix(DataBits: TBitArray; ECLevel: TErrorCorrectionLevel; Version, MaskPattern: Integer; Matrix: TByteMatrix); end; function GetModeBits(Mode: TMode): Integer; begin Result := ModeBits[Mode]; end; function GetModeCharacterCountBits(Mode: TMode; Version: TVersion): Integer; var Number: Integer; Offset: Integer; begin Number := Version.VersionNumber; if (Number <= 9) then begin Offset := 0; end else if (Number <= 26) then begin Offset := 1; end else begin Offset := 2; end; Result := ModeCharacterCountBits[Mode][Offset]; end; type TBlockPair = class private FDataBytes: TByteArray; FErrorCorrectionBytes: TByteArray; public constructor Create(BA1, BA2: TByteArray); function GetDataBytes: TByteArray; function GetErrorCorrectionBytes: TByteArray; end; TGenericGFPoly = class; TGenericGF = class private FExpTable: TIntegerArray; FLogTable: TIntegerArray; FZero: TGenericGFPoly; FOne: TGenericGFPoly; FSize: Integer; FPrimitive: Integer; FGeneratorBase: Integer; FInitialized: Boolean; FPolyList: array of TGenericGFPoly; procedure CheckInit; procedure Initialize; public class function CreateQRCodeField256: TGenericGF; class function AddOrSubtract(A, B: Integer): Integer; constructor Create(Primitive, Size, B: Integer); destructor Destroy; override; function GetZero: TGenericGFPoly; function Exp(A: Integer): Integer; function GetGeneratorBase: Integer; function Inverse(A: Integer): Integer; function Multiply(A, B: Integer): Integer; function BuildMonomial(Degree, Coefficient: Integer): TGenericGFPoly; end; TGenericGFPolyArray = array of TGenericGFPoly; TGenericGFPoly = class private FField: TGenericGF; FCoefficients: TIntegerArray; public constructor Create(AField: TGenericGF; ACoefficients: TIntegerArray); destructor Destroy; override; function Coefficients: TIntegerArray; function Multiply(Other: TGenericGFPoly): TGenericGFPoly; function MultiplyByMonomial(Degree, Coefficient: Integer): TGenericGFPoly; function Divide(Other: TGenericGFPoly): TGenericGFPolyArray; function GetCoefficients: TIntegerArray; function IsZero: Boolean; function GetCoefficient(Degree: Integer): Integer; function GetDegree: Integer; function AddOrSubtract(Other: TGenericGFPoly): TGenericGFPoly; end; TReedSolomonEncoder = class private FField: TGenericGF; FCachedGenerators: TObjectList; public constructor Create(AField: TGenericGF); destructor Destroy; override; procedure Encode(ToEncode: TIntegerArray; ECBytes: Integer); function BuildGenerator(Degree: Integer): TGenericGFPoly; end; TEncoder = class private FEncoderError: Boolean; function ApplyMaskPenaltyRule1Internal(Matrix: TByteMatrix; IsHorizontal: Boolean): Integer; function ChooseMode(const Content: WideString; var EncodeOptions: Integer): TMode; overload; function FilterContent(const Content: WideString; Mode: TMode; EncodeOptions: Integer): WideString; procedure Append8BitBytes(const Content: WideString; Bits: TBitArray; EncodeOptions: Integer); procedure AppendAlphanumericBytes(const Content: WideString; Bits: TBitArray); procedure AppendBytes(const Content: WideString; Mode: TMode; Bits: TBitArray; EncodeOptions: Integer); procedure AppendKanjiBytes(const Content: WideString; Bits: TBitArray); procedure AppendLengthInfo(NumLetters, VersionNum: Integer; Mode: TMode; Bits: TBitArray); procedure AppendModeInfo(Mode: TMode; Bits: TBitArray); procedure AppendNumericBytes(const Content: WideString; Bits: TBitArray); function ChooseMaskPattern(Bits: TBitArray; ECLevel: TErrorCorrectionLevel; Version: Integer; Matrix: TByteMatrix): Integer; function GenerateECBytes(DataBytes: TByteArray; NumECBytesInBlock: Integer): TByteArray; function GetAlphanumericCode(Code: Integer): Integer; procedure GetNumDataBytesAndNumECBytesForBlockID(NumTotalBytes, NumDataBytes, NumRSBlocks, BlockID: Integer; var NumDataBytesInBlock: TIntegerArray; var NumECBytesInBlock: TIntegerArray); procedure InterleaveWithECBytes(Bits: TBitArray; NumTotalBytes, NumDataBytes, NumRSBlocks: Integer; var Result: TBitArray); //function IsOnlyDoubleByteKanji(const Content: WideString): Boolean; procedure TerminateBits(NumDataBytes: Integer; var Bits: TBitArray); function CalculateMaskPenalty(Matrix: TByteMatrix): Integer; function ApplyMaskPenaltyRule1(Matrix: TByteMatrix): Integer; function ApplyMaskPenaltyRule2(Matrix: TByteMatrix): Integer; function ApplyMaskPenaltyRule3(Matrix: TByteMatrix): Integer; function ApplyMaskPenaltyRule4(Matrix: TByteMatrix): Integer; //procedure Encode(const Content: WideString; ECLevel: TErrorCorrectionLevel; QRCode: TQRCode); overload; procedure Encode(const Content: WideString; EncodeOptions: Integer; ECLevel: TErrorCorrectionLevel; QRCode: TQRCode); public constructor Create; property EncoderError: Boolean read FEncoderError; end; function TEncoder.ApplyMaskPenaltyRule1(Matrix: TByteMatrix): Integer; begin Result := ApplyMaskPenaltyRule1Internal(Matrix, True) + ApplyMaskPenaltyRule1Internal(Matrix, False); end; // Apply mask penalty rule 2 and return the penalty. Find 2x2 blocks with the same color and give // penalty to them. function TEncoder.ApplyMaskPenaltyRule2(Matrix: TByteMatrix): Integer; var Penalty: Integer; TheArray: T2DByteArray; Width: Integer; Height: Integer; X: Integer; Y: Integer; Value: Integer; begin Penalty := 0; TheArray := Matrix.GetArray; Width := Matrix.Width; Height := Matrix.Height; for Y := 0 to Height - 2 do begin for X := 0 to Width - 2 do begin Value := TheArray[Y][X]; if ((Value = TheArray[Y][X + 1]) and (Value = TheArray[Y + 1][X]) and (Value = TheArray[Y + 1][X + 1])) then begin Inc(Penalty, 3); end; end; end; Result := Penalty; end; // Apply mask penalty rule 3 and return the penalty. Find consecutive cells of 00001011101 or // 10111010000, and give penalty to them. If we find patterns like 000010111010000, we give // penalties twice (i.e. 40 * 2). function TEncoder.ApplyMaskPenaltyRule3(Matrix: TByteMatrix): Integer; var Penalty: Integer; TheArray: T2DByteArray; Width: Integer; Height: Integer; X: Integer; Y: Integer; begin Penalty := 0; TheArray := Matrix.GetArray; Width := Matrix.Width; Height := Matrix.Height; for Y := 0 to Height - 1 do begin for X := 0 to Width - 1 do begin if ((X + 6 < Width) and (TheArray[Y][X] = 1) and (TheArray[Y][X + 1] = 0) and (TheArray[Y][X + 2] = 1) and (TheArray[Y][X + 3] = 1) and (TheArray[Y][X + 4] = 1) and (TheArray[Y][X + 5] = 0) and (TheArray[Y][X + 6] = 1) and (((X + 10 < Width) and (TheArray[Y][X + 7] = 0) and (TheArray[Y][X + 8] = 0) and (TheArray[Y][X + 9] = 0) and (TheArray[Y][X + 10] = 0)) or ((X - 4 >= 0) and (TheArray[Y][X - 1] = 0) and (TheArray[Y][X - 2] = 0) and (TheArray[Y][X - 3] = 0) and (TheArray[Y][X - 4] = 0)))) then begin Inc(Penalty, 40); end; if ((Y + 6 < Height) and (TheArray[Y][X] = 1) and (TheArray[Y + 1][X] = 0) and (TheArray[Y + 2][X] = 1) and (TheArray[Y + 3][X] = 1) and (TheArray[Y + 4][X] = 1) and (TheArray[Y + 5][X] = 0) and (TheArray[Y + 6][X] = 1) and (((Y + 10 < Height) and (TheArray[Y + 7][X] = 0) and (TheArray[Y + 8][X] = 0) and (TheArray[Y + 9][X] = 0) and (TheArray[Y + 10][X] = 0)) or ((Y - 4 >= 0) and (TheArray[Y - 1][X] = 0) and (TheArray[Y - 2][X] = 0) and (TheArray[Y - 3][X] = 0) and (TheArray[Y - 4][X] = 0)))) then begin Inc(Penalty, 40); end; end; end; Result := Penalty; end; // Apply mask penalty rule 4 and return the penalty. Calculate the ratio of dark cells and give // penalty if the ratio is far from 50%. It gives 10 penalty for 5% distance. Examples: // - 0% => 100 // - 40% => 20 // - 45% => 10 // - 50% => 0 // - 55% => 10 // - 55% => 20 // - 100% => 100 function TEncoder.ApplyMaskPenaltyRule4(Matrix: TByteMatrix): Integer; var NumDarkCells: Integer; TheArray: T2DByteArray; Width: Integer; Height: Integer; NumTotalCells: Integer; DarkRatio: Double; X: Integer; Y: Integer; begin NumDarkCells := 0; TheArray := Matrix.GetArray; Width := Matrix.Width; Height := Matrix.Height; for Y := 0 to Height - 1 do begin for X := 0 to Width - 1 do begin if (TheArray[Y][X] = 1) then begin Inc(NumDarkCells); end; end; end; NumTotalCells := Matrix.Height * Matrix.Width; DarkRatio := NumDarkCells / NumTotalCells; Result := Round(Abs((DarkRatio * 100 - 50)) / 50); end; // Helper function for applyMaskPenaltyRule1. We need this for doing this calculation in both // vertical and horizontal orders respectively. function TEncoder.ApplyMaskPenaltyRule1Internal(Matrix: TByteMatrix; IsHorizontal: Boolean): Integer; var Penalty: Integer; NumSameBitCells: Integer; PrevBit: Integer; TheArray: T2DByteArray; I: Integer; J: Integer; Bit: Integer; ILimit: Integer; JLimit: Integer; begin Penalty := 0; NumSameBitCells := 0; PrevBit := -1; // Horizontal mode: // for (int i = 0; i < matrix.height(); ++i) { // for (int j = 0; j < matrix.width(); ++j) { // int bit = matrix.get(i, j); // Vertical mode: // for (int i = 0; i < matrix.width(); ++i) { // for (int j = 0; j < matrix.height(); ++j) { // int bit = matrix.get(j, i); if (IsHorizontal) then begin ILimit := Matrix.Height; JLimit := Matrix.Width; end else begin ILimit := Matrix.Width; JLimit := Matrix.Height; end; TheArray := Matrix.GetArray; for I := 0 to ILimit - 1 do begin for J := 0 to JLimit - 1 do begin if (IsHorizontal) then begin Bit := TheArray[I][J]; end else begin Bit := TheArray[J][I]; end; if (Bit = PrevBit) then begin Inc(NumSameBitCells); // Found five repetitive cells with the same color (bit). // We'll give penalty of 3. if (NumSameBitCells = 5) then begin Inc(Penalty, 3); end else if (NumSameBitCells > 5) then begin // After five repetitive cells, we'll add the penalty one // by one. Inc(Penalty, 1); ; end; end else begin NumSameBitCells := 1; // Include the cell itself. PrevBit := Bit; end; end; NumSameBitCells := 0; // Clear at each row/column. end; Result := Penalty; end; { TQRCode } constructor TQRCode.Create; begin FMode := qmTerminator; FQRCodeError := False; FECLevel := nil; FVersion := -1; FMatrixWidth := -1; FMaskPattern := -1; FNumTotalBytes := -1; FNumDataBytes := -1; FNumECBytes := -1; FNumRSBlocks := -1; FMatrix := nil; end; destructor TQRCode.Destroy; begin if (Assigned(FECLevel)) then begin FECLevel.Free; end; if (Assigned(FMatrix)) then begin FMatrix.Free; end; inherited; end; function TQRCode.At(X, Y: Integer): Integer; var Value: Integer; begin // The value must be zero or one. Value := FMatrix.Get(X, Y); if (not ((Value = 0) or (Value = 1))) then begin FQRCodeError := True; end; Result := Value; end; function TQRCode.IsValid: Boolean; begin Result := // First check if all version are not uninitialized. ((FECLevel <> nil) and (FVersion <> -1) and (FMatrixWidth <> -1) and (FMaskPattern <> -1) and (FNumTotalBytes <> -1) and (FNumDataBytes <> -1) and (FNumECBytes <> -1) and (FNumRSBlocks <> -1) and // Then check them in other ways.. IsValidMaskPattern(FMaskPattern) and (FNumTotalBytes = FNumDataBytes + FNumECBytes) and // ByteMatrix stuff. (Assigned(FMatrix)) and (FMatrixWidth = FMatrix.Width) and // See 7.3.1 of JISX0510:2004 (Fp.5). (FMatrix.Width = FMatrix.Height)); // Must be square. end; function TQRCode.IsValidMaskPattern(MaskPattern: Integer): Boolean; begin Result := (MaskPattern >= 0) and (MaskPattern < NUM_MASK_PATTERNS); end; procedure TQRCode.SetMatrix(NewMatrix: TByteMatrix); begin if (Assigned(FMatrix)) then begin FMatrix.Free; FMatrix := nil; end; FMatrix := NewMatrix; end; procedure TQRCode.SetAll(VersionNum, NumBytes, NumDataBytes, NumRSBlocks, NumECBytes, MatrixWidth: Integer); begin FVersion := VersionNum; FNumTotalBytes := NumBytes; FNumDataBytes := NumDataBytes; FNumRSBlocks := NumRSBlocks; FNumECBytes := NumECBytes; FMatrixWidth := MatrixWidth; end; procedure TQRCode.SetECLevel(NewECLevel: TErrorCorrectionLevel); begin if (Assigned(FECLevel)) then begin FECLevel.Free; end; FECLevel := TErrorCorrectionLevel.Create; FECLevel.Assign(NewECLevel); end; { TByteMatrix } procedure TByteMatrix.Clear(Value: Byte); var X, Y: Integer; begin for Y := 0 to FHeight - 1 do begin for X := 0 to FWidth - 1 do begin Bytes[Y][X] := Value; end; end; end; constructor TByteMatrix.Create(Width, Height: Integer); var Y: Integer; X: Integer; begin FWidth := Width; FHeight := Height; SetLength(Bytes, Height); for Y := 0 to Height - 1 do begin SetLength(Bytes[Y], Width); for X := 0 to Width - 1 do begin Bytes[Y][X] := 0; end; end; end; function TByteMatrix.Get(X, Y: Integer): Integer; begin if (Bytes[Y][X] = 255) then Result := -1 else Result := Bytes[Y][X]; end; function TByteMatrix.GetArray: T2DByteArray; begin Result := Bytes; end; function TByteMatrix.Hash: AnsiString; var X, Y: Integer; Counter: Integer; CC: Integer; begin Result := ''; for Y := 0 to FHeight - 1 do begin Counter := 0; for X := 0 to FWidth - 1 do begin CC := Get(X, Y); if (CC = -1) then CC := 255; Counter := Counter + CC; end; Result := Result + AnsiChar((Counter mod 26) + 65); end; end; procedure TByteMatrix.SetBoolean(X, Y: Integer; Value: Boolean); begin Bytes[Y][X] := Byte(Value) and $FF; end; procedure TByteMatrix.SetInteger(X, Y, Value: Integer); begin Bytes[Y][X] := Value and $FF; end; procedure TByteMatrix.Assign(Source: TByteMatrix); var SourceLength: Integer; begin SourceLength := Length(Source.Bytes); SetLength(Bytes, SourceLength); if (SourceLength > 0) then begin Move(Source.Bytes[0], Bytes[0], SourceLength); end; FWidth := Source.Width; FHeight := Source.Height; end; { TEncoder } function TEncoder.CalculateMaskPenalty(Matrix: TByteMatrix): Integer; var Penalty: Integer; begin Penalty := 0; Inc(Penalty, ApplyMaskPenaltyRule1(Matrix)); Inc(Penalty, ApplyMaskPenaltyRule2(Matrix)); Inc(Penalty, ApplyMaskPenaltyRule3(Matrix)); Inc(Penalty, ApplyMaskPenaltyRule4(Matrix)); Result := Penalty; end; {procedure TEncoder.Encode(const Content: WideString; ECLevel: TErrorCorrectionLevel; QRCode: TQRCode); begin Encode(Content, ECLevel, nil, QRCode); end;} procedure TEncoder.Encode(const Content: WideString; EncodeOptions: Integer; ECLevel: TErrorCorrectionLevel; QRCode: TQRCode); var Mode: TMode; DataBits: TBitArray; FinalBits: TBitArray; HeaderBits: TBitArray; HeaderAndDataBits: TBitArray; Matrix: TByteMatrix; NumLetters: Integer; MatrixUtil: TMatrixUtil; BitsNeeded: Integer; ProvisionalBitsNeeded: Integer; ProvisionalVersion: TVersion; Version: TVersion; ECBlocks: TECBlocks; NumDataBytes: Integer; Dimension: Integer; FilteredContent: WideString; begin DataBits := TBitArray.Create; HeaderBits := TBitArray.Create; // Pick an encoding mode appropriate for the content. Note that this will not attempt to use // multiple modes / segments even if that were more efficient. Twould be nice. // Collect data within the main segment, separately, to count its size if needed. Don't add it to // main payload yet. Mode := ChooseMode(Content, EncodeOptions); FilteredContent := FilterContent(Content, Mode, EncodeOptions); AppendBytes(FilteredContent, Mode, DataBits, EncodeOptions); // (With ECI in place,) Write the mode marker AppendModeInfo(Mode, HeaderBits); // Hard part: need to know version to know how many bits length takes. But need to know how many // bits it takes to know version. First we take a guess at version by assuming version will be // the minimum, 1: ProvisionalVersion := TVersion.GetVersionForNumber(1); try ProvisionalBitsNeeded := HeaderBits.GetSize + GetModeCharacterCountBits(Mode, ProvisionalVersion) + DataBits.GetSize; finally ProvisionalVersion.Free; end; ProvisionalVersion := TVersion.ChooseVersion(ProvisionalBitsNeeded, ECLevel); try // Use that guess to calculate the right version. I am still not sure this works in 100% of cases. BitsNeeded := HeaderBits.GetSize + GetModeCharacterCountBits(Mode, ProvisionalVersion) + DataBits.GetSize; Version := TVersion.ChooseVersion(BitsNeeded, ECLevel); finally ProvisionalVersion.Free; end; HeaderAndDataBits := TBitArray.Create; FinalBits := TBitArray.Create; try HeaderAndDataBits.AppendBitArray(HeaderBits); // Find "length" of main segment and write it if (Mode = qmByte) then begin NumLetters := DataBits.GetSizeInBytes; end else begin NumLetters := Length(FilteredContent); end; AppendLengthInfo(NumLetters, Version.VersionNumber, Mode, HeaderAndDataBits); // Put data together into the overall payload HeaderAndDataBits.AppendBitArray(DataBits); ECBlocks := Version.GetECBlocksForLevel(ECLevel); NumDataBytes := Version.GetTotalCodewords - ECBlocks.GetTotalECCodewords; // Terminate the bits properly. TerminateBits(NumDataBytes, HeaderAndDataBits); // Interleave data bits with error correction code. InterleaveWithECBytes(HeaderAndDataBits, Version.GetTotalCodewords, NumDataBytes, ECBlocks.GetNumBlocks, FinalBits); // QRCode qrCode = new QRCode(); // This is passed in QRCode.SetECLevel(ECLevel); QRCode.Mode := Mode; QRCode.Version := Version.VersionNumber; // Choose the mask pattern and set to "qrCode". Dimension := Version.GetDimensionForVersion; Matrix := TByteMatrix.Create(Dimension, Dimension); QRCode.MaskPattern := ChooseMaskPattern(FinalBits, ECLevel, Version.VersionNumber, Matrix); Matrix.Free; Matrix := TByteMatrix.Create(Dimension, Dimension); // Build the matrix and set it to "qrCode". MatrixUtil := TMatrixUtil.Create; try MatrixUtil.BuildMatrix(FinalBits, QRCode.ECLevel, QRCode.Version, QRCode.MaskPattern, Matrix); finally MatrixUtil.Free; end; QRCode.SetMatrix(Matrix); // QRCode will free the matrix finally DataBits.Free; HeaderAndDataBits.Free; FinalBits.Free; HeaderBits.Free; Version.Free; end; end; function TEncoder.FilterContent(const Content: WideString; Mode: TMode; EncodeOptions: Integer): WideString; var X: Integer; CanAdd: Boolean; begin Result := ''; for X := 1 to Length(Content) do begin CanAdd := False; if (Mode = qmNumeric) then begin CanAdd := (Content[X] >= '0') and (Content[X] <= '9'); end else if (Mode = qmAlphanumeric) then begin CanAdd := GetAlphanumericCode(Ord(Content[X])) > 0; end else if (Mode = qmByte) then begin if (EncodeOptions = 3) then begin CanAdd := Ord(Content[X]) <= $FF; end else if ((EncodeOptions = 4) or (EncodeOptions = 5)) then begin CanAdd := True; end; end; if (CanAdd) then begin Result := Result + Content[X]; end; end; end; // Return the code point of the table used in alphanumeric mode or // -1 if there is no corresponding code in the table. function TEncoder.GetAlphanumericCode(Code: Integer): Integer; begin if (Code < Length(ALPHANUMERIC_TABLE)) then begin Result := ALPHANUMERIC_TABLE[Code]; end else begin Result := -1; end; end; // Choose the mode based on the content function TEncoder.ChooseMode(const Content: WideString; var EncodeOptions: Integer): TMode; var AllNumeric: Boolean; AllAlphanumeric: Boolean; AllISO: Boolean; I: Integer; C: WideChar; begin if (EncodeOptions = 0) then begin AllNumeric := Length(Content) > 0; I := 1; while (I <= Length(Content)) and (AllNumeric) do begin C := Content[I]; if ((C < '0') or (C > '9')) then begin AllNumeric := False; end else begin Inc(I); end; end; if (not AllNumeric) then begin AllAlphanumeric := Length(Content) > 0; I := 1; while (I <= Length(Content)) and (AllAlphanumeric) do begin C := Content[I]; if (GetAlphanumericCode(Ord(C)) < 0) then begin AllAlphanumeric := False; end else begin Inc(I); end; end; end else begin AllAlphanumeric := False; end; if (not AllAlphanumeric) then begin AllISO := Length(Content) > 0; I := 1; while (I <= Length(Content)) and (AllISO) do begin C := Content[I]; if (Ord(C) > $FF) then begin AllISO := False; end else begin Inc(I); end; end; end else begin AllISO := False; end; if (AllNumeric) then begin Result := qmNumeric; end else if (AllAlphanumeric) then begin Result := qmAlphanumeric; end else if (AllISO) then begin Result := qmByte; EncodeOptions := 3; end else begin Result := qmByte; EncodeOptions := 4; end; end else if (EncodeOptions = 1) then begin Result := qmNumeric; end else if (EncodeOptions = 2) then begin Result := qmAlphanumeric; end else begin Result := qmByte; end; end; constructor TEncoder.Create; begin FEncoderError := False; end; {function TEncoder.IsOnlyDoubleByteKanji(const Content: WideString): Boolean; var I: Integer; Char1: Integer; begin Result := True; I := 0; while ((I < Length(Content)) and Result) do begin Char1 := Ord(Content[I + 1]); if (((Char1 < $81) or (Char1 > $9F)) and ((Char1 < $E0) or (Char1 > $EB))) then begin Result := False; end; end; end;} function TEncoder.ChooseMaskPattern(Bits: TBitArray; ECLevel: TErrorCorrectionLevel; Version: Integer; Matrix: TByteMatrix): Integer; var MinPenalty: Integer; BestMaskPattern: Integer; MaskPattern: Integer; MatrixUtil: TMatrixUtil; Penalty: Integer; begin MinPenalty := MaxInt; BestMaskPattern := -1; // We try all mask patterns to choose the best one. for MaskPattern := 0 to NUM_MASK_PATTERNS - 1 do begin MatrixUtil := TMatrixUtil.Create; try MatrixUtil.BuildMatrix(Bits, ECLevel, Version, MaskPattern, Matrix); finally MatrixUtil.Free; end; Penalty := CalculateMaskPenalty(Matrix); if (Penalty < MinPenalty) then begin MinPenalty := Penalty; BestMaskPattern := MaskPattern; end; end; Result := BestMaskPattern; end; // Terminate bits as described in 8.4.8 and 8.4.9 of JISX0510:2004 (p.24). procedure TEncoder.TerminateBits(NumDataBytes: Integer; var Bits: TBitArray); var Capacity: Integer; I: Integer; NumBitsInLastByte: Integer; NumPaddingBytes: Integer; begin Capacity := NumDataBytes shl 3; if (Bits.GetSize > Capacity) then begin FEncoderError := True; Exit; end; I := 0; while ((I < 4) and (Bits.GetSize < Capacity)) do begin Bits.AppendBit(False); Inc(I); end; // Append termination bits. See 8.4.8 of JISX0510:2004 (p.24) for details. // If the last byte isn't 8-bit aligned, we'll add padding bits. NumBitsInLastByte := Bits.GetSize and $07; if (NumBitsInLastByte > 0) then begin for I := NumBitsInLastByte to 7 do begin Bits.AppendBit(False); end; end; // If we have more space, we'll fill the space with padding patterns defined in 8.4.9 (p.24). NumPaddingBytes := NumDataBytes - Bits.GetSizeInBytes; for I := 0 to NumPaddingBytes - 1 do begin if ((I and $01) = 0) then begin Bits.AppendBits($EC, 8); end else begin Bits.AppendBits($11, 8); end; end; if (Bits.GetSize <> Capacity) then begin FEncoderError := True; end; end; // Get number of data bytes and number of error correction bytes for block id "blockID". Store // the result in "numDataBytesInBlock", and "numECBytesInBlock". See table 12 in 8.5.1 of // JISX0510:2004 (p.30) procedure TEncoder.GetNumDataBytesAndNumECBytesForBlockID(NumTotalBytes, NumDataBytes, NumRSBlocks, BlockID: Integer; var NumDataBytesInBlock: TIntegerArray; var NumECBytesInBlock: TIntegerArray); var NumRSBlocksInGroup1: Integer; NumRSBlocksInGroup2: Integer; NumTotalBytesInGroup1: Integer; NumTotalBytesInGroup2: Integer; NumDataBytesInGroup1: Integer; NumDataBytesInGroup2: Integer; NumECBytesInGroup1: Integer; NumECBytesInGroup2: Integer; begin if (BlockID >= NumRSBlocks) then begin FEncoderError := True; Exit; end; // numRsBlocksInGroup2 = 196 % 5 = 1 NumRSBlocksInGroup2 := NumTotalBytes mod NumRSBlocks; // numRsBlocksInGroup1 = 5 - 1 = 4 NumRSBlocksInGroup1 := NumRSBlocks - NumRSBlocksInGroup2; // numTotalBytesInGroup1 = 196 / 5 = 39 NumTotalBytesInGroup1 := NumTotalBytes div NumRSBlocks; // numTotalBytesInGroup2 = 39 + 1 = 40 NumTotalBytesInGroup2 := NumTotalBytesInGroup1 + 1; // numDataBytesInGroup1 = 66 / 5 = 13 NumDataBytesInGroup1 := NumDataBytes div NumRSBlocks; // numDataBytesInGroup2 = 13 + 1 = 14 NumDataBytesInGroup2 := NumDataBytesInGroup1 + 1; // numEcBytesInGroup1 = 39 - 13 = 26 NumECBytesInGroup1 := NumTotalBytesInGroup1 - NumDataBytesInGroup1; // numEcBytesInGroup2 = 40 - 14 = 26 NumECBytesInGroup2 := NumTotalBytesInGroup2 - NumDataBytesInGroup2; // Sanity checks. // 26 = 26 if (NumECBytesInGroup1 <> NumECBytesInGroup2) then begin FEncoderError := True; Exit; end; // 5 = 4 + 1. if (NumRSBlocks <> (NumRSBlocksInGroup1 + NumRSBlocksInGroup2)) then begin FEncoderError := True; Exit; end; // 196 = (13 + 26) * 4 + (14 + 26) * 1 if (NumTotalBytes <> ((NumDataBytesInGroup1 + NumECBytesInGroup1) * NumRSBlocksInGroup1) + ((NumDataBytesInGroup2 + NumECBytesInGroup2) * NumRSBlocksInGroup2)) then begin FEncoderError := True; Exit; end; if (BlockID < NumRSBlocksInGroup1) then begin NumDataBytesInBlock[0] := NumDataBytesInGroup1; NumECBytesInBlock[0] := NumECBytesInGroup1; end else begin NumDataBytesInBlock[0] := NumDataBytesInGroup2; NumECBytesInBlock[0] := NumECBytesInGroup2; end; end; // Interleave "bits" with corresponding error correction bytes. On success, store the result in // "result". The interleave rule is complicated. See 8.6 of JISX0510:2004 (p.37) for details. procedure TEncoder.InterleaveWithECBytes(Bits: TBitArray; NumTotalBytes, NumDataBytes, NumRSBlocks: Integer; var Result: TBitArray); var DataBytesOffset: Integer; MaxNumDataBytes: Integer; MaxNumECBytes: Integer; Blocks: TObjectList; NumDataBytesInBlock: TIntegerArray; NumECBytesInBlock: TIntegerArray; Size: Integer; DataBytes: TByteArray; ECBytes: TByteArray; I, J: Integer; BlockPair: TBlockPair; begin SetLength(ECBytes, 0); // "bits" must have "getNumDataBytes" bytes of data. if (Bits.GetSizeInBytes <> NumDataBytes) then begin FEncoderError := True; Exit; end; // Step 1. Divide data bytes into blocks and generate error correction bytes for them. We'll // store the divided data bytes blocks and error correction bytes blocks into "blocks". DataBytesOffset := 0; MaxNumDataBytes := 0; MaxNumECBytes := 0; // Since, we know the number of reedsolmon blocks, we can initialize the vector with the number. Blocks := TObjectList.Create(True); try Blocks.Capacity := NumRSBlocks; for I := 0 to NumRSBlocks - 1 do begin SetLength(NumDataBytesInBlock, 1); SetLength(NumECBytesInBlock, 1); GetNumDataBytesAndNumECBytesForBlockID(NumTotalBytes, NumDataBytes, NumRSBlocks, I, NumDataBytesInBlock, NumECBytesInBlock); Size := NumDataBytesInBlock[0]; SetLength(DataBytes, Size); Bits.ToBytes(8 * DataBytesOffset, DataBytes, 0, Size); ECBytes := GenerateECBytes(DataBytes, NumECBytesInBlock[0]); BlockPair := TBlockPair.Create(DataBytes, ECBytes); Blocks.Add(BlockPair); MaxNumDataBytes := Max(MaxNumDataBytes, Size); MaxNumECBytes := Max(MaxNumECBytes, Length(ECBytes)); Inc(DataBytesOffset, NumDataBytesInBlock[0]); end; if (NumDataBytes <> DataBytesOffset) then begin FEncoderError := True; Exit; end; // First, place data blocks. for I := 0 to MaxNumDataBytes - 1 do begin for J := 0 to Blocks.Count - 1 do begin DataBytes := TBlockPair(Blocks.Items[J]).GetDataBytes; if (I < Length(DataBytes)) then begin Result.AppendBits(DataBytes[I], 8); end; end; end; // Then, place error correction blocks. for I := 0 to MaxNumECBytes - 1 do begin for J := 0 to Blocks.Count - 1 do begin ECBytes := TBlockPair(Blocks.Items[J]).GetErrorCorrectionBytes; if (I < Length(ECBytes)) then begin Result.AppendBits(ECBytes[I], 8); end; end; end; finally Blocks.Free; end; if (NumTotalBytes <> Result.GetSizeInBytes) then // Should be same. begin FEncoderError := True; Exit; end; end; function TEncoder.GenerateECBytes(DataBytes: TByteArray; NumECBytesInBlock: Integer): TByteArray; var NumDataBytes: Integer; ToEncode: TIntegerArray; ReedSolomonEncoder: TReedSolomonEncoder; I: Integer; ECBytes: TByteArray; GenericGF: TGenericGF; begin NumDataBytes := Length(DataBytes); SetLength(ToEncode, NumDataBytes + NumECBytesInBlock); for I := 0 to NumDataBytes - 1 do begin ToEncode[I] := DataBytes[I] and $FF; end; GenericGF := TGenericGF.CreateQRCodeField256; try ReedSolomonEncoder := TReedSolomonEncoder.Create(GenericGF); try ReedSolomonEncoder.Encode(ToEncode, NumECBytesInBlock); finally ReedSolomonEncoder.Free; end; finally GenericGF.Free; end; SetLength(ECBytes, NumECBytesInBlock); for I := 0 to NumECBytesInBlock - 1 do begin ECBytes[I] := ToEncode[NumDataBytes + I]; end; Result := ECBytes; end; // Append mode info. On success, store the result in "bits". procedure TEncoder.AppendModeInfo(Mode: TMode; Bits: TBitArray); begin Bits.AppendBits(GetModeBits(Mode), 4); end; // Append length info. On success, store the result in "bits". procedure TEncoder.AppendLengthInfo(NumLetters, VersionNum: Integer; Mode: TMode; Bits: TBitArray); var NumBits: Integer; Version: TVersion; begin Version := TVersion.GetVersionForNumber(VersionNum); try NumBits := GetModeCharacterCountBits(Mode, Version); finally Version.Free; end; if (NumLetters > ((1 shl NumBits) - 1)) then begin FEncoderError := True; Exit; end; Bits.AppendBits(NumLetters, NumBits); end; // Append "bytes" in "mode" mode (encoding) into "bits". On success, store the result in "bits". procedure TEncoder.AppendBytes(const Content: WideString; Mode: TMode; Bits: TBitArray; EncodeOptions: Integer); begin if (Mode = qmNumeric) then begin AppendNumericBytes(Content, Bits); end else if (Mode = qmAlphanumeric) then begin AppendAlphanumericBytes(Content, Bits); end else if (Mode = qmByte) then begin Append8BitBytes(Content, Bits, EncodeOptions); end else if (Mode = qmKanji) then begin AppendKanjiBytes(Content, Bits); end else begin FEncoderError := True; Exit; end; end; procedure TEncoder.AppendNumericBytes(const Content: WideString; Bits: TBitArray); var ContentLength: Integer; I: Integer; Num1: Integer; Num2: Integer; Num3: Integer; begin ContentLength := Length(Content); I := 0; while (I < ContentLength) do begin Num1 := Ord(Content[I + 0 + 1]) - Ord('0'); if (I + 2 < ContentLength) then begin // Encode three numeric letters in ten bits. Num2 := Ord(Content[I + 1 + 1]) - Ord('0'); Num3 := Ord(Content[I + 2 + 1]) - Ord('0'); Bits.AppendBits(Num1 * 100 + Num2 * 10 + Num3, 10); Inc(I, 3); end else if (I + 1 < ContentLength) then begin // Encode two numeric letters in seven bits. Num2 := Ord(Content[I + 1 + 1]) - Ord('0'); Bits.AppendBits(Num1 * 10 + Num2, 7); Inc(I, 2); end else begin // Encode one numeric letter in four bits. Bits.AppendBits(Num1, 4); Inc(I); end; end; end; procedure TEncoder.AppendAlphanumericBytes(const Content: WideString; Bits: TBitArray); var ContentLength: Integer; I: Integer; Code1: Integer; Code2: Integer; begin ContentLength := Length(Content); I := 0; while (I < ContentLength) do begin Code1 := GetAlphanumericCode(Ord(Content[I + 0 + 1])); if (Code1 = -1) then begin FEncoderError := True; Exit; end; if (I + 1 < ContentLength) then begin Code2 := GetAlphanumericCode(Ord(Content[I + 1 + 1])); if (Code2 = -1) then begin FEncoderError := True; Exit; end; // Encode two alphanumeric letters in 11 bits. Bits.AppendBits(Code1 * 45 + Code2, 11); Inc(I, 2); end else begin // Encode one alphanumeric letter in six bits. Bits.AppendBits(Code1, 6); Inc(I); end; end; end; procedure TEncoder.Append8BitBytes(const Content: WideString; Bits: TBitArray; EncodeOptions: Integer); var Bytes: TByteArray; I: Integer; UTF8Version: AnsiString; begin SetLength(Bytes, 0); if (EncodeOptions = 3) then begin SetLength(Bytes, Length(Content)); for I := 1 to Length(Content) do begin Bytes[I - 1] := Ord(Content[I]) and $FF; end; end else if (EncodeOptions = 4) then begin // Add the UTF-8 BOM UTF8Version := #$EF#$BB#$BF + UTF8Encode(Content); SetLength(Bytes, Length(UTF8Version)); if (Length(UTF8Version) > 0) then begin Move(UTF8Version[1], Bytes[0], Length(UTF8Version)); end; end else if (EncodeOptions = 5) then begin // No BOM UTF8Version := UTF8Encode(Content); SetLength(Bytes, Length(UTF8Version)); if (Length(UTF8Version) > 0) then begin Move(UTF8Version[1], Bytes[0], Length(UTF8Version)); end; end; for I := 0 to Length(Bytes) - 1 do begin Bits.AppendBits(Bytes[I], 8); end; end; procedure TEncoder.AppendKanjiBytes(const Content: WideString; Bits: TBitArray); var Bytes: TByteArray; ByteLength: Integer; I: Integer; Byte1: Integer; Byte2: Integer; Code: Integer; Subtracted: Integer; Encoded: Integer; begin SetLength(Bytes, 0); try except FEncoderError := True; Exit; end; ByteLength := Length(Bytes); I := 0; while (I < ByteLength) do begin Byte1 := Bytes[I] and $FF; Byte2 := Bytes[I + 1] and $FF; Code := (Byte1 shl 8) or Byte2; Subtracted := -1; if ((Code >= $8140) and (Code <= $9ffc)) then begin Subtracted := Code - $8140; end else if ((Code >= $e040) and (Code <= $ebbf)) then begin Subtracted := Code - $c140; end; if (Subtracted = -1) then begin FEncoderError := True; Exit; end; Encoded := ((Subtracted shr 8) * $c0) + (Subtracted and $ff); Bits.AppendBits(Encoded, 13); Inc(I, 2); end; end; procedure TMatrixUtil.ClearMatrix(Matrix: TByteMatrix); begin Matrix.Clear(Byte(-1)); end; constructor TMatrixUtil.Create; begin FMatrixUtilError := False; end; // Build 2D matrix of QR Code from "dataBits" with "ecLevel", "version" and "getMaskPattern". On // success, store the result in "matrix" and return true. procedure TMatrixUtil.BuildMatrix(DataBits: TBitArray; ECLevel: TErrorCorrectionLevel; Version, MaskPattern: Integer; Matrix: TByteMatrix); begin ClearMatrix(Matrix); EmbedBasicPatterns(Version, Matrix); // Type information appear with any version. EmbedTypeInfo(ECLevel, MaskPattern, Matrix); // Version info appear if version >= 7. MaybeEmbedVersionInfo(Version, Matrix); // Data should be embedded at end. EmbedDataBits(DataBits, MaskPattern, Matrix); end; // Embed basic patterns. On success, modify the matrix and return true. // The basic patterns are: // - Position detection patterns // - Timing patterns // - Dark dot at the left bottom corner // - Position adjustment patterns, if need be procedure TMatrixUtil.EmbedBasicPatterns(Version: Integer; Matrix: TByteMatrix); begin // Let's get started with embedding big squares at corners. EmbedPositionDetectionPatternsAndSeparators(Matrix); // Then, embed the dark dot at the left bottom corner. EmbedDarkDotAtLeftBottomCorner(Matrix); // Position adjustment patterns appear if version >= 2. MaybeEmbedPositionAdjustmentPatterns(Version, Matrix); // Timing patterns should be embedded after position adj. patterns. EmbedTimingPatterns(Matrix); end; // Embed type information. On success, modify the matrix. procedure TMatrixUtil.EmbedTypeInfo(ECLevel: TErrorCorrectionLevel; MaskPattern: Integer; Matrix: TByteMatrix); var TypeInfoBits: TBitArray; I: Integer; Bit: Boolean; X1, Y1: Integer; X2, Y2: Integer; begin TypeInfoBits := TBitArray.Create; try MakeTypeInfoBits(ECLevel, MaskPattern, TypeInfoBits); for I := 0 to TypeInfoBits.GetSize - 1 do begin // Place bits in LSB to MSB order. LSB (least significant bit) is the last value in // "typeInfoBits". Bit := TypeInfoBits.Get(TypeInfoBits.GetSize - 1 - I); // Type info bits at the left top corner. See 8.9 of JISX0510:2004 (p.46). X1 := TYPE_INFO_COORDINATES[I][0]; Y1 := TYPE_INFO_COORDINATES[I][1]; Matrix.SetBoolean(X1, Y1, Bit); if (I < 8) then begin // Right top corner. X2 := Matrix.Width - I - 1; Y2 := 8; Matrix.SetBoolean(X2, Y2, Bit); end else begin // Left bottom corner. X2 := 8; Y2 := Matrix.Height - 7 + (I - 8); Matrix.SetBoolean(X2, Y2, Bit); end; end; finally TypeInfoBits.Free; end; end; // Embed version information if need be. On success, modify the matrix and return true. // See 8.10 of JISX0510:2004 (p.47) for how to embed version information. procedure TMatrixUtil.MaybeEmbedVersionInfo(Version: Integer; Matrix: TByteMatrix); var VersionInfoBits: TBitArray; I, J: Integer; BitIndex: Integer; Bit: Boolean; begin if (Version < 7) then begin Exit; // Don't need version info. end; VersionInfoBits := TBitArray.Create; try MakeVersionInfoBits(Version, VersionInfoBits); BitIndex := 6 * 3 - 1; // It will decrease from 17 to 0. for I := 0 to 5 do begin for J := 0 to 2 do begin // Place bits in LSB (least significant bit) to MSB order. Bit := VersionInfoBits.Get(BitIndex); Dec(BitIndex); // Left bottom corner. Matrix.SetBoolean(I, Matrix.Height - 11 + J, Bit); // Right bottom corner. Matrix.SetBoolean(Matrix.Height - 11 + J, I, Bit); end; end; finally VersionInfoBits.Free; end; end; // Embed "dataBits" using "getMaskPattern". On success, modify the matrix and return true. // For debugging purposes, it skips masking process if "getMaskPattern" is -1. // See 8.7 of JISX0510:2004 (p.38) for how to embed data bits. procedure TMatrixUtil.EmbedDataBits(DataBits: TBitArray; MaskPattern: Integer; Matrix: TByteMatrix); var BitIndex: Integer; Direction: Integer; X, Y, I, XX: Integer; Bit: Boolean; MaskUtil: TMaskUtil; begin MaskUtil := TMaskUtil.Create; try BitIndex := 0; Direction := -1; // Start from the right bottom cell. X := Matrix.Width - 1; Y := Matrix.Height - 1; while (X > 0) do begin // Skip the vertical timing pattern. if (X = 6) then begin Dec(X, 1); end; while ((Y >= 0) and (Y < Matrix.Height)) do begin for I := 0 to 1 do begin XX := X - I; // Skip the cell if it's not empty. if (not IsEmpty(Matrix.Get(XX, Y))) then begin Continue; end; if (BitIndex < DataBits.GetSize) then begin Bit := DataBits.Get(BitIndex); Inc(BitIndex); end else begin // Padding bit. If there is no bit left, we'll fill the left cells with 0, as described // in 8.4.9 of JISX0510:2004 (p. 24). Bit := False; end; // Skip masking if mask_pattern is -1. if (MaskPattern <> -1) then begin if (MaskUtil.GetDataMaskBit(MaskPattern, XX, Y)) then begin Bit := not Bit; end; end; Matrix.SetBoolean(XX, Y, Bit); end; Inc(Y, Direction); end; Direction := -Direction; // Reverse the direction. Inc(Y, Direction); Dec(X, 2); // Move to the left. end; finally MaskUtil.Free; end; // All bits should be consumed. if (BitIndex <> DataBits.GetSize()) then begin FMatrixUtilError := True; Exit; end; end; // Return the position of the most significant bit set (to one) in the "value". The most // significant bit is position 32. If there is no bit set, return 0. Examples: // - findMSBSet(0) => 0 // - findMSBSet(1) => 1 // - findMSBSet(255) => 8 function TMatrixUtil.FindMSBSet(Value: Integer): Integer; var NumDigits: Integer; begin NumDigits := 0; while (Value <> 0) do begin Value := Value shr 1; Inc(NumDigits); end; Result := NumDigits; end; // Calculate BCH (Bose-Chaudhuri-Hocquenghem) code for "value" using polynomial "poly". The BCH // code is used for encoding type information and version information. // Example: Calculation of version information of 7. // f(x) is created from 7. // - 7 = 000111 in 6 bits // - f(x) = x^2 + x^1 + x^0 // g(x) is given by the standard (p. 67) // - g(x) = x^12 + x^11 + x^10 + x^9 + x^8 + x^5 + x^2 + 1 // Multiply f(x) by x^(18 - 6) // - f'(x) = f(x) * x^(18 - 6) // - f'(x) = x^14 + x^13 + x^12 // Calculate the remainder of f'(x) / g(x) // x^2 // __________________________________________________ // g(x) )x^14 + x^13 + x^12 // x^14 + x^13 + x^12 + x^11 + x^10 + x^7 + x^4 + x^2 // -------------------------------------------------- // x^11 + x^10 + x^7 + x^4 + x^2 // // The remainder is x^11 + x^10 + x^7 + x^4 + x^2 // Encode it in binary: 110010010100 // The return value is 0xc94 (1100 1001 0100) // // Since all coefficients in the polynomials are 1 or 0, we can do the calculation by bit // operations. We don't care if cofficients are positive or negative. function TMatrixUtil.CalculateBCHCode(Value, Poly: Integer): Integer; var MSBSetInPoly: Integer; begin // If poly is "1 1111 0010 0101" (version info poly), msbSetInPoly is 13. We'll subtract 1 // from 13 to make it 12. MSBSetInPoly := FindMSBSet(Poly); Value := Value shl (MSBSetInPoly - 1); // Do the division business using exclusive-or operations. while (FindMSBSet(Value) >= MSBSetInPoly) do begin Value := Value xor (Poly shl (FindMSBSet(Value) - MSBSetInPoly)); end; // Now the "value" is the remainder (i.e. the BCH code) Result := Value; end; // Make bit vector of type information. On success, store the result in "bits" and return true. // Encode error correction level and mask pattern. See 8.9 of // JISX0510:2004 (p.45) for details. procedure TMatrixUtil.MakeTypeInfoBits(ECLevel: TErrorCorrectionLevel; MaskPattern: Integer; Bits: TBitArray); var TypeInfo: Integer; BCHCode: Integer; MaskBits: TBitArray; begin if ((MaskPattern >= 0) and (MaskPattern < NUM_MASK_PATTERNS)) then begin TypeInfo := (ECLevel.Bits shl 3) or MaskPattern; Bits.AppendBits(TypeInfo, 5); BCHCode := CalculateBCHCode(TypeInfo, TYPE_INFO_POLY); Bits.AppendBits(BCHCode, 10); MaskBits := TBitArray.Create; try MaskBits.AppendBits(TYPE_INFO_MASK_PATTERN, 15); Bits.XorOperation(MaskBits); finally MaskBits.Free; end; if (Bits.GetSize <> 15) then // Just in case. begin FMatrixUtilError := True; Exit; end; end; end; // Make bit vector of version information. On success, store the result in "bits" and return true. // See 8.10 of JISX0510:2004 (p.45) for details. procedure TMatrixUtil.MakeVersionInfoBits(Version: Integer; Bits: TBitArray); var BCHCode: Integer; begin Bits.AppendBits(Version, 6); BCHCode := CalculateBCHCode(Version, VERSION_INFO_POLY); Bits.AppendBits(BCHCode, 12); if (Bits.GetSize() <> 18) then begin FMatrixUtilError := True; Exit; end; end; // Check if "value" is empty. function TMatrixUtil.IsEmpty(Value: Integer): Boolean; begin Result := (Value = -1); end; procedure TMatrixUtil.EmbedTimingPatterns(Matrix: TByteMatrix); var I: Integer; Bit: Integer; begin // -8 is for skipping position detection patterns (size 7), and two horizontal/vertical // separation patterns (size 1). Thus, 8 = 7 + 1. for I := 8 to Matrix.Width - 9 do begin Bit := (I + 1) mod 2; // Horizontal line. if (IsEmpty(Matrix.Get(I, 6))) then begin Matrix.SetInteger(I, 6, Bit); end; // Vertical line. if (IsEmpty(Matrix.Get(6, I))) then begin Matrix.SetInteger(6, I, Bit); end; end; end; // Embed the lonely dark dot at left bottom corner. JISX0510:2004 (p.46) procedure TMatrixUtil.EmbedDarkDotAtLeftBottomCorner(Matrix: TByteMatrix); begin if (Matrix.Get(8, Matrix.Height - 8) = 0) then begin FMatrixUtilError := True; Exit; end; Matrix.SetInteger(8, Matrix.Height - 8, 1); end; procedure TMatrixUtil.EmbedHorizontalSeparationPattern(XStart, YStart: Integer; Matrix: TByteMatrix); var X: Integer; begin // We know the width and height. for X := 0 to 7 do begin if (not IsEmpty(Matrix.Get(XStart + X, YStart))) then begin FMatrixUtilError := True; Exit; end; Matrix.SetInteger(XStart + X, YStart, HORIZONTAL_SEPARATION_PATTERN[0][X]); end; end; procedure TMatrixUtil.EmbedVerticalSeparationPattern(XStart, YStart: Integer; Matrix: TByteMatrix); var Y: Integer; begin // We know the width and height. for Y := 0 to 6 do begin if (not IsEmpty(Matrix.Get(XStart, YStart + Y))) then begin FMatrixUtilError := True; Exit; end; Matrix.SetInteger(XStart, YStart + Y, VERTICAL_SEPARATION_PATTERN[Y][0]); end; end; // Note that we cannot unify the function with embedPositionDetectionPattern() despite they are // almost identical, since we cannot write a function that takes 2D arrays in different sizes in // C/C++. We should live with the fact. procedure TMatrixUtil.EmbedPositionAdjustmentPattern(XStart, YStart: Integer; Matrix: TByteMatrix); var X, Y: Integer; begin // We know the width and height. for Y := 0 to 4 do begin for X := 0 to 4 do begin if (not IsEmpty(Matrix.Get(XStart + X, YStart + Y))) then begin FMatrixUtilError := True; Exit; end; Matrix.SetInteger(XStart + X, YStart + Y, POSITION_ADJUSTMENT_PATTERN[Y][X]); end; end; end; procedure TMatrixUtil.EmbedPositionDetectionPattern(XStart, YStart: Integer; Matrix: TByteMatrix); var X, Y: Integer; begin // We know the width and height. for Y := 0 to 6 do begin for X := 0 to 6 do begin if (not IsEmpty(Matrix.Get(XStart + X, YStart + Y))) then begin FMatrixUtilError := True; Exit; end; Matrix.SetInteger(XStart + X, YStart + Y, POSITION_DETECTION_PATTERN[Y][X]); end; end; end; // Embed position detection patterns and surrounding vertical/horizontal separators. procedure TMatrixUtil.EmbedPositionDetectionPatternsAndSeparators(Matrix: TByteMatrix); var PDPWidth: Integer; HSPWidth: Integer; VSPSize: Integer; begin // Embed three big squares at corners. PDPWidth := Length(POSITION_DETECTION_PATTERN[0]); // Left top corner. EmbedPositionDetectionPattern(0, 0, Matrix); // Right top corner. EmbedPositionDetectionPattern(Matrix.Width - PDPWidth, 0, Matrix); // Left bottom corner. EmbedPositionDetectionPattern(0, Matrix.Width - PDPWidth, Matrix); // Embed horizontal separation patterns around the squares. HSPWidth := Length(HORIZONTAL_SEPARATION_PATTERN[0]); // Left top corner. EmbedHorizontalSeparationPattern(0, HSPWidth - 1, Matrix); // Right top corner. EmbedHorizontalSeparationPattern(Matrix.Width - HSPWidth, HSPWidth - 1, Matrix); // Left bottom corner. EmbedHorizontalSeparationPattern(0, Matrix.Width - HSPWidth, Matrix); // Embed vertical separation patterns around the squares. VSPSize := Length(VERTICAL_SEPARATION_PATTERN); // Left top corner. EmbedVerticalSeparationPattern(VSPSize, 0, Matrix); // Right top corner. EmbedVerticalSeparationPattern(Matrix.Height - VSPSize - 1, 0, Matrix); // Left bottom corner. EmbedVerticalSeparationPattern(VSPSize, Matrix.Height - VSPSize, Matrix); end; // Embed position adjustment patterns if need be. procedure TMatrixUtil.MaybeEmbedPositionAdjustmentPatterns(Version: Integer; Matrix: TByteMatrix); var Index: Integer; Coordinates: array of Integer; NumCoordinates: Integer; X, Y, I, J: Integer; begin if (Version >= 2) then begin Index := Version - 1; NumCoordinates := Length(POSITION_ADJUSTMENT_PATTERN_COORDINATE_TABLE[Index]); SetLength(Coordinates, NumCoordinates); Move(POSITION_ADJUSTMENT_PATTERN_COORDINATE_TABLE[Index][0], Coordinates[0], NumCoordinates * SizeOf(Integer)); for I := 0 to NumCoordinates - 1 do begin for J := 0 to NumCoordinates - 1 do begin Y := Coordinates[I]; X := Coordinates[J]; if ((X = -1) or (Y = -1)) then begin Continue; end; // If the cell is unset, we embed the position adjustment pattern here. if (IsEmpty(Matrix.Get(X, Y))) then begin // -2 is necessary since the x/y coordinates point to the center of the pattern, not the // left top corner. EmbedPositionAdjustmentPattern(X - 2, Y - 2, Matrix); end; end; end; end; end; { TBitArray } procedure TBitArray.AppendBits(Value, NumBits: Integer); var NumBitsLeft: Integer; begin if ((NumBits < 0) or (NumBits > 32)) then begin end; EnsureCapacity(Size + NumBits); for NumBitsLeft := NumBits downto 1 do begin AppendBit(((Value shr (NumBitsLeft - 1)) and $01) = 1); end; end; constructor TBitArray.Create(Size: Integer); begin Size := Size; SetLength(Bits, (Size + 31) shr 5); end; constructor TBitArray.Create; begin Size := 0; SetLength(Bits, 1); end; function TBitArray.Get(I: Integer): Boolean; begin Result := (Bits[I shr 5] and (1 shl (I and $1F))) <> 0; end; function TBitArray.GetSize: Integer; begin Result := Size; end; function TBitArray.GetSizeInBytes: Integer; begin Result := (Size + 7) shr 3; end; procedure TBitArray.SetBit(Index: Integer); begin Bits[Index shr 5] := Bits[Index shr 5] or (1 shl (Index and $1F)); end; procedure TBitArray.AppendBit(Bit: Boolean); begin EnsureCapacity(Size + 1); if (Bit) then begin Bits[Size shr 5] := Bits[Size shr 5] or (1 shl (Size and $1F)); end; Inc(Size); end; procedure TBitArray.ToBytes(BitOffset: Integer; Source: TByteArray; Offset, NumBytes: Integer); var I: Integer; J: Integer; TheByte: Integer; begin for I := 0 to NumBytes - 1 do begin TheByte := 0; for J := 0 to 7 do begin if (Get(BitOffset)) then begin TheByte := TheByte or (1 shl (7 - J)); end; Inc(BitOffset); end; Source[Offset + I] := TheByte; end; end; procedure TBitArray.XorOperation(Other: TBitArray); var I: Integer; begin if (Length(Bits) = Length(Other.Bits)) then begin for I := 0 to Length(Bits) - 1 do begin // The last byte could be incomplete (i.e. not have 8 bits in // it) but there is no problem since 0 XOR 0 == 0. Bits[I] := Bits[I] xor Other.Bits[I]; end; end; end; procedure TBitArray.AppendBitArray(NewBitArray: TBitArray); var OtherSize: Integer; I: Integer; begin OtherSize := NewBitArray.GetSize; EnsureCapacity(Size + OtherSize); for I := 0 to OtherSize - 1 do begin AppendBit(NewBitArray.Get(I)); end; end; procedure TBitArray.EnsureCapacity(Size: Integer); begin if (Size > (Length(Bits) shl 5)) then begin SetLength(Bits, Size); end; end; { TErrorCorrectionLevel } procedure TErrorCorrectionLevel.Assign(Source: TErrorCorrectionLevel); begin Self.FBits := Source.FBits; end; function TErrorCorrectionLevel.Ordinal: Integer; begin Result := 0; end; { TVersion } class function TVersion.ChooseVersion(NumInputBits: Integer; ECLevel: TErrorCorrectionLevel): TVersion; var VersionNum: Integer; Version: TVersion; NumBytes: Integer; ECBlocks: TECBlocks; NumECBytes: Integer; NumDataBytes: Integer; TotalInputBytes: Integer; begin Result := nil; // In the following comments, we use numbers of Version 7-H. for VersionNum := 1 to 40 do begin Version := TVersion.GetVersionForNumber(VersionNum); // numBytes = 196 NumBytes := Version.GetTotalCodewords; // getNumECBytes = 130 ECBlocks := Version.GetECBlocksForLevel(ECLevel); NumECBytes := ECBlocks.GetTotalECCodewords; // getNumDataBytes = 196 - 130 = 66 NumDataBytes := NumBytes - NumECBytes; TotalInputBytes := (NumInputBits + 7) div 8; if (NumDataBytes >= TotalInputBytes) then begin Result := Version; Exit; end else begin Version.Free; end; end; end; constructor TVersion.Create(VersionNumber: Integer; AlignmentPatternCenters: array of Integer; ECBlocks1, ECBlocks2, ECBlocks3, ECBlocks4: TECBlocks); var Total: Integer; ECBlock: TECB; ECBArray: TECBArray; I: Integer; begin Self.VersionNumber := VersionNumber; SetLength(Self.AlignmentPatternCenters, Length(AlignmentPatternCenters)); if (Length(AlignmentPatternCenters) > 0) then begin Move(AlignmentPatternCenters[0], Self.AlignmentPatternCenters[0], Length(AlignmentPatternCenters) * SizeOf(Integer)); end; SetLength(ECBlocks, 4); ECBlocks[0] := ECBlocks1; ECBlocks[1] := ECBlocks2; ECBlocks[2] := ECBlocks3; ECBlocks[3] := ECBlocks4; Total := 0; ECCodewords := ECBlocks1.GetECCodewordsPerBlock; ECBArray := ECBlocks1.GetECBlocks; for I := 0 to Length(ECBArray) - 1 do begin ECBlock := ECBArray[I]; Inc(Total, ECBlock.GetCount * (ECBlock.GetDataCodewords + ECCodewords)); end; TotalCodewords := Total; end; destructor TVersion.Destroy; var X: Integer; begin for X := 0 to Length(ECBlocks) - 1 do begin ECBlocks[X].Free; end; inherited; end; function TVersion.GetDimensionForVersion: Integer; begin Result := 17 + 4 * VersionNumber; end; function TVersion.GetECBlocksForLevel(ECLevel: TErrorCorrectionLevel): TECBlocks; begin Result := ECBlocks[ECLevel.Ordinal]; end; function TVersion.GetTotalCodewords: Integer; begin Result := TotalCodewords; end; class function TVersion.GetVersionForNumber(VersionNum: Integer): TVersion; begin if (VersionNum = 1) then begin Result := TVersion.Create(1, [], TECBlocks.Create(7, TECB.Create(1, 19)), TECBlocks.Create(10, TECB.Create(1, 16)), TECBlocks.Create(13, TECB.Create(1, 13)), TECBlocks.Create(17, TECB.Create(1, 9))); end else if (VersionNum = 2) then begin Result := TVersion.Create(2, [6, 18], TECBlocks.Create(10, TECB.Create(1, 34)), TECBlocks.Create(16, TECB.Create(1, 28)), TECBlocks.Create(22, TECB.Create(1, 22)), TECBlocks.Create(28, TECB.Create(1, 16))); end else if (VersionNum = 3) then begin Result := TVersion.Create(3, [6, 22], TECBlocks.Create(15, TECB.Create(1, 55)), TECBlocks.Create(26, TECB.Create(1, 44)), TECBlocks.Create(18, TECB.Create(2, 17)), TECBlocks.Create(22, TECB.Create(2, 13))); end else if (VersionNum = 4) then begin Result := TVersion.Create(4, [6, 26], TECBlocks.Create(20, TECB.Create(1, 80)), TECBlocks.Create(18, TECB.Create(2, 32)), TECBlocks.Create(26, TECB.Create(2, 24)), TECBlocks.Create(16, TECB.Create(4, 9))); end else if (VersionNum = 5) then begin Result := TVersion.Create(5, [6, 30], TECBlocks.Create(26, TECB.Create(1, 108)), TECBlocks.Create(24, TECB.Create(2, 43)), TECBlocks.Create(18, TECB.Create(2, 15), TECB.Create(2, 16)), TECBlocks.Create(22, TECB.Create(2, 11), TECB.Create(2, 12))); end else if (VersionNum = 6) then begin Result := TVersion.Create(6, [6, 34], TECBlocks.Create(18, TECB.Create(2, 68)), TECBlocks.Create(16, TECB.Create(4, 27)), TECBlocks.Create(24, TECB.Create(4, 19)), TECBlocks.Create(28, TECB.Create(4, 15))); end else if (VersionNum = 7) then begin Result := TVersion.Create(7, [6, 22, 38], TECBlocks.Create(20, TECB.Create(2, 78)), TECBlocks.Create(18, TECB.Create(4, 31)), TECBlocks.Create(18, TECB.Create(2, 14), TECB.Create(4, 15)), TECBlocks.Create(26, TECB.Create(4, 13), TECB.Create(1, 14))); end else if (VersionNum = 8) then begin Result := TVersion.Create(8, [6, 24, 42], TECBlocks.Create(24, TECB.Create(2, 97)), TECBlocks.Create(22, TECB.Create(2, 38), TECB.Create(2, 39)), TECBlocks.Create(22, TECB.Create(4, 18), TECB.Create(2, 19)), TECBlocks.Create(26, TECB.Create(4, 14), TECB.Create(2, 15))); end else if (VersionNum = 9) then begin Result := TVersion.Create(9, [6, 26, 46], TECBlocks.Create(30, TECB.Create(2, 116)), TECBlocks.Create(22, TECB.Create(3, 36), TECB.Create(2, 37)), TECBlocks.Create(20, TECB.Create(4, 16), TECB.Create(4, 17)), TECBlocks.Create(24, TECB.Create(4, 12), TECB.Create(4, 13))); end else if (VersionNum = 10) then begin Result := TVersion.Create(10, [6, 28, 50], TECBlocks.Create(18, TECB.Create(2, 68), TECB.Create(2, 69)), TECBlocks.Create(26, TECB.Create(4, 43), TECB.Create(1, 44)), TECBlocks.Create(24, TECB.Create(6, 19), TECB.Create(2, 20)), TECBlocks.Create(28, TECB.Create(6, 15), TECB.Create(2, 16))); end else if (VersionNum = 11) then begin Result := TVersion.Create(11, [6, 30, 54], TECBlocks.Create(20, TECB.Create(4, 81)), TECBlocks.Create(30, TECB.Create(1, 50), TECB.Create(4, 51)), TECBlocks.Create(28, TECB.Create(4, 22), TECB.Create(4, 23)), TECBlocks.Create(24, TECB.Create(3, 12), TECB.Create(8, 13))); end else if (VersionNum = 12) then begin Result := TVersion.Create(12, [6, 32, 58], TECBlocks.Create(24, TECB.Create(2, 92), TECB.Create(2, 93)), TECBlocks.Create(22, TECB.Create(6, 36), TECB.Create(2, 37)), TECBlocks.Create(26, TECB.Create(4, 20), TECB.Create(6, 21)), TECBlocks.Create(28, TECB.Create(7, 14), TECB.Create(4, 15))); end else if (VersionNum = 13) then begin Result := TVersion.Create(13, [6, 34, 62], TECBlocks.Create(26, TECB.Create(4, 107)), TECBlocks.Create(22, TECB.Create(8, 37), TECB.Create(1, 38)), TECBlocks.Create(24, TECB.Create(8, 20), TECB.Create(4, 21)), TECBlocks.Create(22, TECB.Create(12, 11), TECB.Create(4, 12))); end else if (VersionNum = 14) then begin Result := TVersion.Create(14, [6, 26, 46, 66], TECBlocks.Create(30, TECB.Create(3, 115), TECB.Create(1, 116)), TECBlocks.Create(24, TECB.Create(4, 40), TECB.Create(5, 41)), TECBlocks.Create(20, TECB.Create(11, 16), TECB.Create(5, 17)), TECBlocks.Create(24, TECB.Create(11, 12), TECB.Create(5, 13))); end else if (VersionNum = 15) then begin Result := TVersion.Create(15, [6, 26, 48, 70], TECBlocks.Create(22, TECB.Create(5, 87), TECB.Create(1, 88)), TECBlocks.Create(24, TECB.Create(5, 41), TECB.Create(5, 42)), TECBlocks.Create(30, TECB.Create(5, 24), TECB.Create(7, 25)), TECBlocks.Create(24, TECB.Create(11, 12), TECB.Create(7, 13))); end else if (VersionNum = 16) then begin Result := TVersion.Create(16, [6, 26, 50, 74], TECBlocks.Create(24, TECB.Create(5, 98), TECB.Create(1, 99)), TECBlocks.Create(28, TECB.Create(7, 45), TECB.Create(3, 46)), TECBlocks.Create(24, TECB.Create(15, 19), TECB.Create(2, 20)), TECBlocks.Create(30, TECB.Create(3, 15), TECB.Create(13, 16))); end else if (VersionNum = 17) then begin Result := TVersion.Create(17, [6, 30, 54, 78], TECBlocks.Create(28, TECB.Create(1, 107), TECB.Create(5, 108)), TECBlocks.Create(28, TECB.Create(10, 46), TECB.Create(1, 47)), TECBlocks.Create(28, TECB.Create(1, 22), TECB.Create(15, 23)), TECBlocks.Create(28, TECB.Create(2, 14), TECB.Create(17, 15))); end else if (VersionNum = 18) then begin Result := TVersion.Create(18, [6, 30, 56, 82], TECBlocks.Create(30, TECB.Create(5, 120), TECB.Create(1, 121)), TECBlocks.Create(26, TECB.Create(9, 43), TECB.Create(4, 44)), TECBlocks.Create(28, TECB.Create(17, 22), TECB.Create(1, 23)), TECBlocks.Create(28, TECB.Create(2, 14), TECB.Create(19, 15))); end else if (VersionNum = 19) then begin Result := TVersion.Create(19, [6, 30, 58, 86], TECBlocks.Create(28, TECB.Create(3, 113), TECB.Create(4, 114)), TECBlocks.Create(26, TECB.Create(3, 44), TECB.Create(11, 45)), TECBlocks.Create(26, TECB.Create(17, 21), TECB.Create(4, 22)), TECBlocks.Create(26, TECB.Create(9, 13), TECB.Create(16, 14))); end else if (VersionNum = 20) then begin Result := TVersion.Create(20, [6, 34, 62, 90], TECBlocks.Create(28, TECB.Create(3, 107), TECB.Create(5, 108)), TECBlocks.Create(26, TECB.Create(3, 41), TECB.Create(13, 42)), TECBlocks.Create(30, TECB.Create(15, 24), TECB.Create(5, 25)), TECBlocks.Create(28, TECB.Create(15, 15), TECB.Create(10, 16))); end else if (VersionNum = 21) then begin Result := TVersion.Create(21, [6, 28, 50, 72, 94], TECBlocks.Create(28, TECB.Create(4, 116), TECB.Create(4, 117)), TECBlocks.Create(26, TECB.Create(17, 42)), TECBlocks.Create(28, TECB.Create(17, 22), TECB.Create(6, 23)), TECBlocks.Create(30, TECB.Create(19, 16), TECB.Create(6, 17))); end else if (VersionNum = 22) then begin Result := TVersion.Create(22, [6, 26, 50, 74, 98], TECBlocks.Create(28, TECB.Create(2, 111), TECB.Create(7, 112)), TECBlocks.Create(28, TECB.Create(17, 46)), TECBlocks.Create(30, TECB.Create(7, 24), TECB.Create(16, 25)), TECBlocks.Create(24, TECB.Create(34, 13))); end else if (VersionNum = 23) then begin Result := TVersion.Create(23, [6, 30, 54, 78, 102], TECBlocks.Create(30, TECB.Create(4, 121), TECB.Create(5, 122)), TECBlocks.Create(28, TECB.Create(4, 47), TECB.Create(14, 48)), TECBlocks.Create(30, TECB.Create(11, 24), TECB.Create(14, 25)), TECBlocks.Create(30, TECB.Create(16, 15), TECB.Create(14, 16))); end else if (VersionNum = 24) then begin Result := TVersion.Create(24, [6, 28, 54, 80, 106], TECBlocks.Create(30, TECB.Create(6, 117), TECB.Create(4, 118)), TECBlocks.Create(28, TECB.Create(6, 45), TECB.Create(14, 46)), TECBlocks.Create(30, TECB.Create(11, 24), TECB.Create(16, 25)), TECBlocks.Create(30, TECB.Create(30, 16), TECB.Create(2, 17))); end else if (VersionNum = 25) then begin Result := TVersion.Create(25, [6, 32, 58, 84, 110], TECBlocks.Create(26, TECB.Create(8, 106), TECB.Create(4, 107)), TECBlocks.Create(28, TECB.Create(8, 47), TECB.Create(13, 48)), TECBlocks.Create(30, TECB.Create(7, 24), TECB.Create(22, 25)), TECBlocks.Create(30, TECB.Create(22, 15), TECB.Create(13, 16))); end else if (VersionNum = 26) then begin Result := TVersion.Create(26, [6, 30, 58, 86, 114], TECBlocks.Create(28, TECB.Create(10, 114), TECB.Create(2, 115)), TECBlocks.Create(28, TECB.Create(19, 46), TECB.Create(4, 47)), TECBlocks.Create(28, TECB.Create(28, 22), TECB.Create(6, 23)), TECBlocks.Create(30, TECB.Create(33, 16), TECB.Create(4, 17))); end else if (VersionNum = 27) then begin Result := TVersion.Create(27, [6, 34, 62, 90, 118], TECBlocks.Create(30, TECB.Create(8, 122), TECB.Create(4, 123)), TECBlocks.Create(28, TECB.Create(22, 45), TECB.Create(3, 46)), TECBlocks.Create(30, TECB.Create(8, 23), TECB.Create(26, 24)), TECBlocks.Create(30, TECB.Create(12, 15), TECB.Create(28, 16))); end else if (VersionNum = 28) then begin Result := TVersion.Create(28, [6, 26, 50, 74, 98, 122], TECBlocks.Create(30, TECB.Create(3, 117), TECB.Create(10, 118)), TECBlocks.Create(28, TECB.Create(3, 45), TECB.Create(23, 46)), TECBlocks.Create(30, TECB.Create(4, 24), TECB.Create(31, 25)), TECBlocks.Create(30, TECB.Create(11, 15), TECB.Create(31, 16))); end else if (VersionNum = 29) then begin Result := TVersion.Create(29, [6, 30, 54, 78, 102, 126], TECBlocks.Create(30, TECB.Create(7, 116), TECB.Create(7, 117)), TECBlocks.Create(28, TECB.Create(21, 45), TECB.Create(7, 46)), TECBlocks.Create(30, TECB.Create(1, 23), TECB.Create(37, 24)), TECBlocks.Create(30, TECB.Create(19, 15), TECB.Create(26, 16))); end else if (VersionNum = 30) then begin Result := TVersion.Create(30, [6, 26, 52, 78, 104, 130], TECBlocks.Create(30, TECB.Create(5, 115), TECB.Create(10, 116)), TECBlocks.Create(28, TECB.Create(19, 47), TECB.Create(10, 48)), TECBlocks.Create(30, TECB.Create(15, 24), TECB.Create(25, 25)), TECBlocks.Create(30, TECB.Create(23, 15), TECB.Create(25, 16))); end else if (VersionNum = 31) then begin Result := TVersion.Create(31, [6, 30, 56, 82, 108, 134], TECBlocks.Create(30, TECB.Create(13, 115), TECB.Create(3, 116)), TECBlocks.Create(28, TECB.Create(2, 46), TECB.Create(29, 47)), TECBlocks.Create(30, TECB.Create(42, 24), TECB.Create(1, 25)), TECBlocks.Create(30, TECB.Create(23, 15), TECB.Create(28, 16))); end else if (VersionNum = 32) then begin Result := TVersion.Create(32, [6, 34, 60, 86, 112, 138], TECBlocks.Create(30, TECB.Create(17, 115)), TECBlocks.Create(28, TECB.Create(10, 46), TECB.Create(23, 47)), TECBlocks.Create(30, TECB.Create(10, 24), TECB.Create(35, 25)), TECBlocks.Create(30, TECB.Create(19, 15), TECB.Create(35, 16))); end else if (VersionNum = 33) then begin Result := TVersion.Create(33, [6, 30, 58, 86, 114, 142], TECBlocks.Create(30, TECB.Create(17, 115), TECB.Create(1, 116)), TECBlocks.Create(28, TECB.Create(14, 46), TECB.Create(21, 47)), TECBlocks.Create(30, TECB.Create(29, 24), TECB.Create(19, 25)), TECBlocks.Create(30, TECB.Create(11, 15), TECB.Create(46, 16))); end else if (VersionNum = 34) then begin Result := TVersion.Create(34, [6, 34, 62, 90, 118, 146], TECBlocks.Create(30, TECB.Create(13, 115), TECB.Create(6, 116)), TECBlocks.Create(28, TECB.Create(14, 46), TECB.Create(23, 47)), TECBlocks.Create(30, TECB.Create(44, 24), TECB.Create(7, 25)), TECBlocks.Create(30, TECB.Create(59, 16), TECB.Create(1, 17))); end else if (VersionNum = 35) then begin Result := TVersion.Create(35, [6, 30, 54, 78, 102, 126, 150], TECBlocks.Create(30, TECB.Create(12, 121), TECB.Create(7, 122)), TECBlocks.Create(28, TECB.Create(12, 47), TECB.Create(26, 48)), TECBlocks.Create(30, TECB.Create(39, 24), TECB.Create(14, 25)), TECBlocks.Create(30, TECB.Create(22, 15), TECB.Create(41, 16))); end else if (VersionNum = 36) then begin Result := TVersion.Create(36, [6, 24, 50, 76, 102, 128, 154], TECBlocks.Create(30, TECB.Create(6, 121), TECB.Create(14, 122)), TECBlocks.Create(28, TECB.Create(6, 47), TECB.Create(34, 48)), TECBlocks.Create(30, TECB.Create(46, 24), TECB.Create(10, 25)), TECBlocks.Create(30, TECB.Create(2, 15), TECB.Create(64, 16))); end else if (VersionNum = 37) then begin Result := TVersion.Create(37, [6, 28, 54, 80, 106, 132, 158], TECBlocks.Create(30, TECB.Create(17, 122), TECB.Create(4, 123)), TECBlocks.Create(28, TECB.Create(29, 46), TECB.Create(14, 47)), TECBlocks.Create(30, TECB.Create(49, 24), TECB.Create(10, 25)), TECBlocks.Create(30, TECB.Create(24, 15), TECB.Create(46, 16))); end else if (VersionNum = 38) then begin Result := TVersion.Create(38, [6, 32, 58, 84, 110, 136, 162], TECBlocks.Create(30, TECB.Create(4, 122), TECB.Create(18, 123)), TECBlocks.Create(28, TECB.Create(13, 46), TECB.Create(32, 47)), TECBlocks.Create(30, TECB.Create(48, 24), TECB.Create(14, 25)), TECBlocks.Create(30, TECB.Create(42, 15), TECB.Create(32, 16))); end else if (VersionNum = 39) then begin Result := TVersion.Create(39, [6, 26, 54, 82, 110, 138, 166], TECBlocks.Create(30, TECB.Create(20, 117), TECB.Create(4, 118)), TECBlocks.Create(28, TECB.Create(40, 47), TECB.Create(7, 48)), TECBlocks.Create(30, TECB.Create(43, 24), TECB.Create(22, 25)), TECBlocks.Create(30, TECB.Create(10, 15), TECB.Create(67, 16))); end else if (VersionNum = 40) then begin Result := TVersion.Create(40, [6, 30, 58, 86, 114, 142, 170], TECBlocks.Create(30, TECB.Create(19, 118), TECB.Create(6, 119)), TECBlocks.Create(28, TECB.Create(18, 47), TECB.Create(31, 48)), TECBlocks.Create(30, TECB.Create(34, 24), TECB.Create(34, 25)), TECBlocks.Create(30, TECB.Create(20, 15), TECB.Create(61, 16))); end else begin Result := nil; end; end; { TMaskUtil } // Return the mask bit for "getMaskPattern" at "x" and "y". See 8.8 of JISX0510:2004 for mask // pattern conditions. function TMaskUtil.GetDataMaskBit(MaskPattern, X, Y: Integer): Boolean; var Intermediate: Integer; Temp: Integer; begin Intermediate := 0; if ((MaskPattern >= 0) and (MaskPattern < NUM_MASK_PATTERNS)) then begin case (MaskPattern) of 0: Intermediate := (Y + X) and 1; 1: Intermediate := Y and 1; 2: Intermediate := X mod 3; 3: Intermediate := (Y + X) mod 3; 4: Intermediate := ((Y shr 1) + (X div 3)) and 1; 5: begin Temp := Y * X; Intermediate := (Temp and 1) + (Temp mod 3); end; 6: begin Temp := Y * X; Intermediate := ((Temp and 1) + (Temp mod 3)) and 1; end; 7: begin Temp := Y * X; Intermediate := ((Temp mod 3) + ((Y + X) and 1)) and 1; end; end; end; Result := Intermediate = 0; end; { TECBlocks } constructor TECBlocks.Create(ECCodewordsPerBlock: Integer; ECBlocks: TECB); begin Self.ECCodewordsPerBlock := ECCodewordsPerBlock; SetLength(Self.ECBlocks, 1); Self.ECBlocks[0] := ECBlocks; end; constructor TECBlocks.Create(ECCodewordsPerBlock: Integer; ECBlocks1, ECBlocks2: TECB); begin Self.ECCodewordsPerBlock := ECCodewordsPerBlock; SetLength(Self.ECBlocks, 2); ECBlocks[0] := ECBlocks1; ECBlocks[1] := ECBlocks2; end; destructor TECBlocks.Destroy; var X: Integer; begin for X := 0 to Length(ECBlocks) - 1 do begin ECBlocks[X].Free; end; inherited; end; function TECBlocks.GetECBlocks: TECBArray; begin Result := ECBlocks; end; function TECBlocks.GetECCodewordsPerBlock: Integer; begin Result := ECCodewordsPerBlock; end; function TECBlocks.GetNumBlocks: Integer; var Total: Integer; I: Integer; begin Total := 0; for I := 0 to Length(ECBlocks) - 1 do begin Inc(Total, ECBlocks[I].GetCount); end; Result := Total; end; function TECBlocks.GetTotalECCodewords: Integer; begin Result := ECCodewordsPerBlock * GetNumBlocks; end; { TBlockPair } constructor TBlockPair.Create(BA1, BA2: TByteArray); begin FDataBytes := BA1; FErrorCorrectionBytes := BA2; end; function TBlockPair.GetDataBytes: TByteArray; begin Result := FDataBytes; end; function TBlockPair.GetErrorCorrectionBytes: TByteArray; begin Result := FErrorCorrectionBytes; end; { TReedSolomonEncoder } function TReedSolomonEncoder.BuildGenerator(Degree: Integer): TGenericGFPoly; var LastGenerator: TGenericGFPoly; NextGenerator: TGenericGFPoly; Poly: TGenericGFPoly; D: Integer; CA: TIntegerArray; begin if (Degree >= FCachedGenerators.Count) then begin LastGenerator := TGenericGFPoly(FCachedGenerators[FCachedGenerators.Count - 1]); for D := FCachedGenerators.Count to Degree do begin SetLength(CA, 2); CA[0] := 1; CA[1] := FField.Exp(D - 1 + FField.GetGeneratorBase); Poly := TGenericGFPoly.Create(FField, CA); NextGenerator := LastGenerator.Multiply(Poly); FCachedGenerators.Add(NextGenerator); LastGenerator := NextGenerator; end; end; Result := TGenericGFPoly(FCachedGenerators[Degree]); end; constructor TReedSolomonEncoder.Create(AField: TGenericGF); var GenericGFPoly: TGenericGFPoly; IntArray: TIntegerArray; begin FField := AField; // Contents of FCachedGenerators will be freed by FGenericGF.Destroy FCachedGenerators := TObjectList.Create(False); SetLength(IntArray, 1); IntArray[0] := 1; GenericGFPoly := TGenericGFPoly.Create(AField, IntArray); FCachedGenerators.Add(GenericGFPoly); end; destructor TReedSolomonEncoder.Destroy; begin FCachedGenerators.Free; inherited; end; procedure TReedSolomonEncoder.Encode(ToEncode: TIntegerArray; ECBytes: Integer); var DataBytes: Integer; Generator: TGenericGFPoly; InfoCoefficients: TIntegerArray; Info: TGenericGFPoly; Remainder: TGenericGFPoly; Coefficients: TIntegerArray; NumZeroCoefficients: Integer; I: Integer; begin SetLength(Coefficients, 0); if (ECBytes > 0) then begin DataBytes := Length(ToEncode) - ECBytes; if (DataBytes > 0) then begin Generator := BuildGenerator(ECBytes); SetLength(InfoCoefficients, DataBytes); InfoCoefficients := Copy(ToEncode, 0, DataBytes); Info := TGenericGFPoly.Create(FField, InfoCoefficients); Info := Info.MultiplyByMonomial(ECBytes, 1); Remainder := Info.Divide(Generator)[1]; Coefficients := Remainder.GetCoefficients; NumZeroCoefficients := ECBytes - Length(Coefficients); for I := 0 to NumZeroCoefficients - 1 do begin ToEncode[DataBytes + I] := 0; end; Move(Coefficients[0], ToEncode[DataBytes + NumZeroCoefficients], Length(Coefficients) * SizeOf(Integer)); end; end; end; { TECB } constructor TECB.Create(Count, DataCodewords: Integer); begin Self.Count := Count; Self.DataCodewords := DataCodewords; end; function TECB.GetCount: Integer; begin Result := Count; end; function TECB.GetDataCodewords: Integer; begin Result := DataCodewords; end; { TGenericGFPoly } function TGenericGFPoly.AddOrSubtract(Other: TGenericGFPoly): TGenericGFPoly; var SmallerCoefficients: TIntegerArray; LargerCoefficients: TIntegerArray; Temp: TIntegerArray; SumDiff: TIntegerArray; LengthDiff: Integer; I: Integer; begin SetLength(SmallerCoefficients, 0); SetLength(LargerCoefficients, 0); SetLength(Temp, 0); SetLength(SumDiff, 0); Result := nil; if (Assigned(Other)) then begin if (FField = Other.FField) then begin if (IsZero) then begin Result := Other; Exit; end; if (Other.IsZero) then begin Result := Self; Exit; end; SmallerCoefficients := FCoefficients; LargerCoefficients := Other.Coefficients; if (Length(SmallerCoefficients) > Length(LargerCoefficients)) then begin Temp := SmallerCoefficients; SmallerCoefficients := LargerCoefficients; LargerCoefficients := Temp; end; SetLength(SumDiff, Length(LargerCoefficients)); LengthDiff := Length(LargerCoefficients) - Length(SmallerCoefficients); // Copy high-order terms only found in higher-degree polynomial's coefficients if (LengthDiff > 0) then begin //SumDiff := Copy(LargerCoefficients, 0, LengthDiff); Move(LargerCoefficients[0], SumDiff[0], LengthDiff * SizeOf(Integer)); end; for I := LengthDiff to Length(LargerCoefficients) - 1 do begin SumDiff[I] := TGenericGF.AddOrSubtract(SmallerCoefficients[I - LengthDiff], LargerCoefficients[I]); end; Result := TGenericGFPoly.Create(FField, SumDiff); end; end; end; function TGenericGFPoly.Coefficients: TIntegerArray; begin Result := FCoefficients; end; constructor TGenericGFPoly.Create(AField: TGenericGF; ACoefficients: TIntegerArray); var CoefficientsLength: Integer; FirstNonZero: Integer; begin FField := AField; SetLength(FField.FPolyList, Length(FField.FPolyList) + 1); FField.FPolyList[Length(FField.FPolyList) - 1] := Self; CoefficientsLength := Length(ACoefficients); if ((CoefficientsLength > 1) and (ACoefficients[0] = 0)) then begin // Leading term must be non-zero for anything except the constant polynomial "0" FirstNonZero := 1; while ((FirstNonZero < CoefficientsLength) and (ACoefficients[FirstNonZero] = 0)) do begin Inc(FirstNonZero); end; if (FirstNonZero = CoefficientsLength) then begin FCoefficients := AField.GetZero.Coefficients; end else begin SetLength(FCoefficients, CoefficientsLength - FirstNonZero); FCoefficients := Copy(ACoefficients, FirstNonZero, Length(FCoefficients)); end; end else begin FCoefficients := ACoefficients; end; end; destructor TGenericGFPoly.Destroy; begin Self.FField := FField; inherited; end; function TGenericGFPoly.Divide(Other: TGenericGFPoly): TGenericGFPolyArray; var Quotient: TGenericGFPoly; Remainder: TGenericGFPoly; DenominatorLeadingTerm: Integer; InverseDenominatorLeadingTerm: integer; DegreeDifference: Integer; Scale: Integer; Term: TGenericGFPoly; IterationQuotient: TGenericGFPoly; begin SetLength(Result, 0); if ((FField = Other.FField) and (not Other.IsZero)) then begin Quotient := FField.GetZero; Remainder := Self; DenominatorLeadingTerm := Other.GetCoefficient(Other.GetDegree); InverseDenominatorLeadingTerm := FField.Inverse(DenominatorLeadingTerm); while ((Remainder.GetDegree >= Other.GetDegree) and (not Remainder.IsZero)) do begin DegreeDifference := Remainder.GetDegree - Other.GetDegree; Scale := FField.Multiply(Remainder.GetCoefficient(Remainder.GetDegree), InverseDenominatorLeadingTerm); Term := Other.MultiplyByMonomial(DegreeDifference, Scale); IterationQuotient := FField.BuildMonomial(DegreeDifference, Scale); Quotient := Quotient.AddOrSubtract(IterationQuotient); Remainder := Remainder.AddOrSubtract(Term); end; SetLength(Result, 2); Result[0] := Quotient; Result[1] := Remainder; end; end; function TGenericGFPoly.GetCoefficient(Degree: Integer): Integer; begin Result := FCoefficients[Length(FCoefficients) - 1 - Degree]; end; function TGenericGFPoly.GetCoefficients: TIntegerArray; begin Result := FCoefficients; end; function TGenericGFPoly.GetDegree: Integer; begin Result := Length(FCoefficients) - 1; end; function TGenericGFPoly.IsZero: Boolean; begin Result := FCoefficients[0] = 0; end; function TGenericGFPoly.Multiply(Other: TGenericGFPoly): TGenericGFPoly; var ACoefficients: TIntegerArray; BCoefficients: TIntegerArray; Product: TIntegerArray; ALength: Integer; BLength: Integer; I: Integer; J: Integer; ACoeff: Integer; begin SetLength(ACoefficients, 0); SetLength(BCoefficients, 0); Result := nil; if (FField = Other.FField) then begin if (IsZero or Other.IsZero) then begin Result := FField.GetZero; Exit; end; ACoefficients := FCoefficients; ALength := Length(ACoefficients); BCoefficients := Other.Coefficients; BLength := Length(BCoefficients); SetLength(Product, ALength + BLength - 1); for I := 0 to ALength - 1 do begin ACoeff := ACoefficients[I]; for J := 0 to BLength - 1 do begin Product[I + J] := TGenericGF.AddOrSubtract(Product[I + J], FField.Multiply(ACoeff, BCoefficients[J])); end; end; Result := TGenericGFPoly.Create(FField, Product); end; end; function TGenericGFPoly.MultiplyByMonomial(Degree, Coefficient: Integer): TGenericGFPoly; var I: Integer; Size: Integer; Product: TIntegerArray; begin Result := nil; if (Degree >= 0) then begin if (Coefficient = 0) then begin Result := FField.GetZero; Exit; end; Size := Length(Coefficients); SetLength(Product, Size + Degree); for I := 0 to Size - 1 do begin Product[I] := FField.Multiply(FCoefficients[I], Coefficient); end; Result := TGenericGFPoly.Create(FField, Product); end; end; { TGenericGF } class function TGenericGF.AddOrSubtract(A, B: Integer): Integer; begin Result := A xor B; end; function TGenericGF.BuildMonomial(Degree, Coefficient: Integer): TGenericGFPoly; var Coefficients: TIntegerArray; begin CheckInit(); if (Degree >= 0) then begin if (Coefficient = 0) then begin Result := FZero; Exit; end; SetLength(Coefficients, Degree + 1); Coefficients[0] := Coefficient; Result := TGenericGFPoly.Create(Self, Coefficients); end else begin Result := nil; end; end; procedure TGenericGF.CheckInit; begin if (not FInitialized) then begin Initialize; end; end; constructor TGenericGF.Create(Primitive, Size, B: Integer); begin FInitialized := False; FPrimitive := Primitive; FSize := Size; FGeneratorBase := B; if (FSize < 0) then begin Initialize; end; end; class function TGenericGF.CreateQRCodeField256: TGenericGF; begin Result := TGenericGF.Create($011D, 256, 0); end; destructor TGenericGF.Destroy; var X: Integer; Y: Integer; begin for X := 0 to Length(FPolyList) - 1 do begin if (Assigned(FPolyList[X])) then begin for Y := X + 1 to Length(FPolyList) - 1 do begin if (FPolyList[Y] = FPolyList[X]) then begin FPolyList[Y] := nil; end; end; FPolyList[X].Free; end; end; inherited; end; function TGenericGF.Exp(A: Integer): Integer; begin CheckInit; Result := FExpTable[A]; end; function TGenericGF.GetGeneratorBase: Integer; begin Result := FGeneratorBase; end; function TGenericGF.GetZero: TGenericGFPoly; begin CheckInit; Result := FZero; end; procedure TGenericGF.Initialize; var X: Integer; I: Integer; CA: TIntegerArray; begin SetLength(FExpTable, FSize); SetLength(FLogTable, FSize); X := 1; for I := 0 to FSize - 1 do begin FExpTable[I] := X; X := X shl 1; // x = x * 2; we're assuming the generator alpha is 2 if (X >= FSize) then begin X := X xor FPrimitive; X := X and (FSize - 1); end; end; for I := 0 to FSize - 2 do begin FLogTable[FExpTable[I]] := I; end; // logTable[0] == 0 but this should never be used SetLength(CA, 1); CA[0] := 0; FZero := TGenericGFPoly.Create(Self, CA); SetLength(CA, 1); CA[0] := 1; FOne := TGenericGFPoly.Create(Self, CA); FInitialized := True; end; function TGenericGF.Inverse(A: Integer): Integer; begin CheckInit; if (A <> 0) then begin Result := FExpTable[FSize - FLogTable[A] - 1]; end else begin Result := 0; end; end; function TGenericGF.Multiply(A, B: Integer): Integer; begin CheckInit; if ((A <> 0) and (B <> 0)) then begin Result := FExpTable[(FLogTable[A] + FLogTable[B]) mod (FSize - 1)]; end else begin Result := 0; end; end; function GenerateQRCode(const Input: WideString; EncodeOptions: Integer): T2DBooleanArray; var Encoder: TEncoder; Level: TErrorCorrectionLevel; QRCode: TQRCode; X: Integer; Y: Integer; begin Level := TErrorCorrectionLevel.Create; Level.FBits := 1; Encoder := TEncoder.Create; QRCode := TQRCode.Create; try Encoder.Encode(Input, EncodeOptions, Level, QRCode); if (Assigned(QRCode.FMatrix)) then begin SetLength(Result, QRCode.FMatrix.FHeight); for Y := 0 to QRCode.FMatrix.FHeight - 1 do begin SetLength(Result[Y], QRCode.FMatrix.FWidth); for X := 0 to QRCode.FMatrix.FWidth - 1 do begin Result[Y][X] := QRCode.FMatrix.Get(Y, X) = 1; end; end; end; finally QRCode.Free; Encoder.Free; Level.Free; end; end; { TDelphiZXingQRCode } constructor TDelphiZXingQRCode.Create; begin FData := ''; FEncoding := qrAuto; FQuietZone := 4; FRows := 0; FColumns := 0; end; procedure TDelphiZXingQRCode.EncodeToImage(const text: string; const Img: TImage); var Row, Column: Integer; BMP: TBitmap; Scale: Double; begin Data := text; BMP := TBitmap.Create; BMP.Height := Rows; BMP.Width := Columns; for Row := 0 to Rows - 1 do begin for Column := 0 to Columns - 1 do begin if (IsBlack[Row, Column]) then BMP.Canvas.Pixels[Column, Row] := clBlack else BMP.Canvas.Pixels[Column, Row] := clWhite; end; end; Img.Canvas.Brush.Color := clWhite; Img.Canvas.FillRect(Rect(0, 0, Img.Width, Img.Height)); if ((BMP.Width > 0) and (BMP.Height > 0)) then begin if (Img.Width < Img.Height) then Scale := Img.Width / BMP.Width else Scale := Img.Height / BMP.Height; Img.Canvas.StretchDraw(Rect(0, 0, Trunc(Scale * BMP.Width), Trunc(Scale * BMP.Height)), BMP); end; BMP.Free; end; function TDelphiZXingQRCode.GetIsBlack(Row, Column: Integer): Boolean; begin Dec(Row, FQuietZone); Dec(Column, FQuietZone); if ((Row >= 0) and (Column >= 0) and (Row < (FRows - FQuietZone * 2)) and (Column < (FColumns - FQuietZone * 2))) then begin Result := FElements[Column, Row]; end else begin Result := False; end; end; procedure TDelphiZXingQRCode.SetData(const NewData: WideString); begin if (FData <> NewData) then begin FData := NewData; Update; end; end; procedure TDelphiZXingQRCode.SetEncoding(NewEncoding: TQRCodeEncoding); begin if (FEncoding <> NewEncoding) then begin FEncoding := NewEncoding; Update; end; end; procedure TDelphiZXingQRCode.SetQuietZone(NewQuietZone: Integer); begin if ((FQuietZone <> NewQuietZone) and (NewQuietZone >= 0) and (NewQuietZone <= 100)) then begin FQuietZone := NewQuietZone; Update; end; end; procedure TDelphiZXingQRCode.Update; begin FElements := GenerateQRCode(FData, Ord(FEncoding)); FRows := Length(FElements) + FQuietZone * 2; FColumns := FRows; end; end.
unit1.pas
unit Unit1; interface uses Winapi.Windows, Winapi.Messages, System.SysUtils, System.Variants, System.Classes, Vcl.Graphics, Vcl.Controls, Vcl.Forms, Vcl.Dialogs, Vcl.StdCtrls, Vcl.ExtCtrls, Vcl.Samples.Spin; type TForm1 = class(TForm) Memo1: TMemo; Button1: TButton; Image1: TImage; ComboBox1: TComboBox; Label1: TLabel; SpinEdit1: TSpinEdit; Label2: TLabel; Memo2: TMemo; Button2: TButton; procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end; var Form1: TForm1; implementation uses DelphiZXIngQRCode; {$R *.dfm} procedure TForm1.Button1Click(Sender: TObject); var zxing: TDelphiZXingQRCode; begin zxing := TDelphiZXingQRCode.Create; try //二维码外边距 zxing.QuietZone := SpinEdit1.Value; //可选值qrAuto, qrNumeric, qrAlphanumeric, qrISO88591, qrUTF8NoBOM, qrUTF8BOM zxing.Encoding := TQRCodeEncoding(ComboBox1.ItemIndex); zxing.EncodeToImage(Memo1.Text, Image1); finally zxing.Free; end; end; end.
