S6E2H 系列烧录算法 

  1 /*************************************************************************
  2  *
  3  *    File name   : FlashPrg.c
  4  *    Description : Cypress FM4 internal flashloader
  5  *
  6  *    History :
  7  *    1. Date        : 9, 2018
  8  *       Author      : Kevin Zhou
  9  *       Description : Adapt for S6E2H series
 10  *
 11  *    $Revision: 0 $
 12  **************************************************************************/
 13 #include "FlashOS.H"        // FlashOS Structures
 14 
 15 #include "s6e2hgxg.h"
 16 
 17 
 18 typedef enum {IDLE, ERASE, WRITE} status;
 19 
 20 #define flash_unit u16
 21 #define flash_ptr volatile flash_unit *
 22 
 23 //Flash commands
 24 #define READ_RESET   0xF0
 25 #define MASS_ERASE   0x10
 26 #define SECTOR_ERASE 0x30
 27 #define FLASH_WRITE  0xA0
 28 #define SECTOR_ERASE_SUSPEND 0xB0
 29 #define READ  0xF0
 30 #define DATA1 0x55 //General command signature
 31 #define DATA2 0x80 //General command signature
 32 #define DATA3 0xAA //General command signature
 33 
 34 //Magic flash addresses
 35 #define ADDRESS1 0xAA8
 36 #define ADDRESS2 0x554
 37 
 38 //Commands use 16bit access
 39 #define SET_COMMAND(data, address) *((flash_ptr)address) = (flash_unit)data
 40 
 41 //Hardware sequence flags
 42 #define DPOL  0x80
 43 #define TOGG  0x40
 44 #define TLOV  0x20
 45 #define SETI  0x08
 46 #define TOGG2 0x04
 47 
 48 #define PROTECT_OFFSET 0x400000
 49 #define CR_TRIM_OFFSET 0x402000
 50 
 51 static void FlashCleanup(flash_ptr flash_halfword) {
 52   *flash_halfword = READ_RESET;
 53 }
 54 
 55 
 56 int Init (u32 adr, u32 clk, u32 fnc) 
 57 {
 58     //Set access size 
 59   FM4_FLASH_IF->FASZR_f.ASZ = 1;
 60   FM4_WORKFLASH_IF->WFASZR_f.ASZ = 0;
 61 
 62     return(0);
 63 }
 64 
 65 int UnInit (u32 fnc) 
 66 {
 67     return 0;
 68 }
 69 
 70 int EraseChip (void) 
 71 {
 72     return (0);                                    
 73 }
 74 
 75 int EraseSector (u32 adr,u32 sz) 
 76 {
 77     flash_unit tmp;
 78   flash_ptr block_start  = (flash_ptr)adr;
 79     
 80   SET_COMMAND(DATA3, ADDRESS1);
 81   SET_COMMAND(DATA1, ADDRESS2);
 82   SET_COMMAND(DATA2, ADDRESS1);
 83   SET_COMMAND(DATA3, ADDRESS1);
 84   SET_COMMAND(DATA1, ADDRESS2);
 85   SET_COMMAND(SECTOR_ERASE, block_start);
 86   tmp = *(flash_ptr)block_start;
 87 
 88   while(TOGG & (*(flash_ptr)block_start ^ (tmp = *(flash_ptr)block_start)))
 89   {
 90     if(TLOV & tmp) {
 91       if(TOGG & (tmp ^ *(flash_ptr)block_start))
 92       {
 93         FlashCleanup(block_start);
 94         return 1;
 95       }
 96     }
 97   }
 98     
 99     return (0);
100 }
101 
102 int ProgramPage (u32 adr, u32 sz, unsigned char *buf) 
103 {
104   flash_unit tmp;
105     
106   flash_ptr flash_halfword  = (flash_ptr)adr;
107   flash_unit * buffer_halfword = (flash_unit *)buf;
108 
109   for (; sz; sz-=sizeof(flash_unit), flash_halfword++, buffer_halfword++)
110   {
111     SET_COMMAND(DATA3, ADDRESS1);
112     SET_COMMAND(DATA1, ADDRESS2);
113     SET_COMMAND(FLASH_WRITE, ADDRESS1);
114     SET_COMMAND(*buffer_halfword, flash_halfword);
115     tmp = *flash_halfword;
116 
117     while(TOGG & (*flash_halfword ^ (tmp = *flash_halfword)))
118     {
119       if(TLOV & tmp) {
120         if(TOGG & (tmp ^ *flash_halfword))
121         {
122           FlashCleanup(flash_halfword);
123           return 1;
124         }
125       }
126     }
127   }
128         
129   return (0);                                 
130 }

 

posted @ 2018-09-05 16:27  大白菜菜pp  阅读(590)  评论(0)    收藏  举报