Claude Max 容易被封?两个 Claude Pro 账号实现双开

Claude Code Cli 支持通过 CLAUDE_CONFIG_DIR 指定配置目录。

默认情况下,直接在终端输入 claude,使用的是 ~/.claude 目录。这里保存着账号登录状态、配置、历史记录、插件和会话等信息。

所以,想使用第二个 Claude Pro 账号,只需要给它指定一个独立的配置目录即可。

1. 配置第二个账号

打开 ~/.zshrc,添加一个别名:

alias claude-work='CLAUDE_CONFIG_DIR="$HOME/.claude-work" claude'

保存后,执行:

source ~/.zshrc

2. 如何使用?

以后在终端中:

claude       # 使用第一个账号
claude-work  # 使用第二个账号

第一次执行 claude-work 时,Claude Code 会在 ~/.claude-work 目录下初始化配置,并要求你重新登录第二个账号。

之后,你甚至可以同时打开两个终端窗口:

  • 终端 A:使用第一个 Claude Pro 账号。
  • 终端 B:使用第二个 Claude Pro 账号。

两个账号各自拥有独立的登录状态、配置和会话记录,互不干扰。

3. 为什么这样就可以?

关键在于这条命令:

CLAUDE_CONFIG_DIR="$HOME/.claude-work" claude

Linux 和 macOS 支持在命令前设置环境变量,这个变量只对当前启动的进程生效。但是这个原理不重要,用起来才是最重要的。

4. 如何单独看额度

这里可以用到 Claude Code 的 Status Line 这个功能,我们可以在 Status 上面看到当前的模型、上下文长度、5H 剩余、周额度等等

先来看一下效果:

image-20261118153751436

第一行是当前模型、思考强度、上下文占用和缓存命中率,第二行是 5 小时额度和 7 天额度的剩余量,以及多久后重置。

脚本依赖 jq。macOS 可以这样装:

brew install jq

把下面的内容保存为 ~/.claude/statusline.sh:

#!/usr/bin/env bash
# Claude Code status line. Requires jq.
set -u

# Claude Code sends one JSON object to stdin on every refresh.
IFS=$'\t' read -r model effort ctx hit used5 reset5 used7 reset7 < <(
  jq -r '
    def percent:
      if type == "number" then ([0, ([100, .] | min)] | max | round)
      else "NA" end;
    [
      (.model.display_name // "Unknown"),
      (.effort.level // "N/A"),
      (.context_window.used_percentage | percent),
      (.prompt_cache.hit_ratio | if type == "number" then (. * 100 | round) else "NA" end),
      (.rate_limits.five_hour.used_percentage | percent),
      (.rate_limits.five_hour.resets_at // "NA"),
      (.rate_limits.seven_day.used_percentage | percent),
      (.rate_limits.seven_day.resets_at // "NA")
    ] | @tsv
  '
)

RESET=$'\033[0m'
DIM=$'\033[2m'
MODEL_COLOR=$'\033[1;35m'
CYAN=$'\033[36m'
SEPARATOR=$'\033[38;2;130;130;130m'
TRACK=$'\033[38;2;120;120;120m'
GREEN=$'\033[32m'
YELLOW=$'\033[33m'
RED=$'\033[31m'

percent_text() {
  if [[ $1 =~ ^[0-9]+$ ]]; then printf '%d%%' "$1"; else printf '%s' '--%'; fi
}

left_text() {
  if [[ $1 =~ ^[0-9]+$ ]]; then printf '%d%%' "$((100 - $1))"; else printf '%s' '--%'; fi
}

reset_after() {
  local ts=$1 seconds days hours mins
  if [[ ! $ts =~ ^[0-9]+([.][0-9]+)?$ ]]; then printf '%s' '--'; return; fi
  seconds=$(( ${ts%%.*} - NOW ))
  (( seconds < 0 )) && seconds=0
  days=$((seconds / 86400))
  hours=$(((seconds % 86400) / 3600))
  mins=$(((seconds % 3600) / 60))
  if (( days > 0 )); then
    printf '%dd %dh' "$days" "$hours"
  elif (( hours > 0 )); then
    printf '%dh %dm' "$hours" "$mins"
  else
    printf '%dm' "$mins"
  fi
}

# Gradient uses stable, full-width block characters: no fractional glyphs.
context_bar() {
  local pct=$1 width=20 filled=0 i pos r g b offset
  if [[ $pct =~ ^[0-9]+$ ]]; then filled=$(((pct * width + 50) / 100)); fi
  for ((i = 0; i < width; i++)); do
    if (( i >= filled )); then
      printf '%s░' "$TRACK"
      continue
    fi
    pos=$((i * 100 / (width - 1)))
    if ((pos <= 50)); then
      r=$(( 0 + 220 * pos / 50 ))
      g=200
      b=$(( 80 - 80 * pos / 50 ))
    else
      offset=$((pos - 50))
      r=220
      g=$(( 200 - 160 * offset / 50 ))
      b=$(( 20 * offset / 50 ))
    fi
    printf '\033[38;2;%d;%d;%dm█' "$r" "$g" "$b"
  done
  printf '%s' "$RESET"
}

usage_color() {
  if [[ ! $1 =~ ^[0-9]+$ ]] || (( $1 < 70 )); then printf '%s' "$GREEN"
  elif (( $1 < 90 )); then printf '%s' "$YELLOW"
  else printf '%s' "$RED"; fi
}

NOW=$(date +%s)
ctx_label=$(percent_text "$ctx")
hit_label=$(percent_text "$hit")
five_left=$(left_text "$used5")
seven_left=$(left_text "$used7")
five_reset=$(reset_after "$reset5")
seven_reset=$(reset_after "$reset7")
ctx_color=$(usage_color "$ctx")
five_color=$(usage_color "$used5")
seven_color=$(usage_color "$used7")

printf '%s[%s · %s]%s  ' "$MODEL_COLOR" "$model" "$effort" "$RESET"
context_bar "$ctx"
printf '  %s%s%s  %s│%s  %sHit%s %s%s\n' "$ctx_color" "$ctx_label" "$RESET" "$SEPARATOR" "$RESET" "$CYAN" "$RESET" "$CYAN" "$hit_label"
printf '5h  %s%s%s left %s·%s reset %s  %s│%s  7d  %s%s%s left %s·%s reset %s\n' \
  "$five_color" "$five_left" "$RESET" "$DIM" "$RESET" "$five_reset" "$SEPARATOR" "$RESET" \
  "$seven_color" "$seven_left" "$RESET" "$DIM" "$RESET" "$seven_reset"

然后在 ~/.claude/settings.json 里加上:

{
  "statusLine": {
    "type": "command",
    "command": "bash \"$HOME/.claude/statusline.sh\""
  }
}

第二个账号用的是 ~/.claude-work/settings.json,同样加上这段。两个账号可以共用 ~/.claude/statusline.sh,额度是 Claude Code 按当前登录账号传给脚本的,所以各自显示各自的用量。

posted @ 2026-11-21 13:23  leikooo  阅读(14)  评论(0)    收藏  举报