Same-Path Victims

There are no same-path victims because this is a single-switch fabric.没有同路径受害者，由于这是一个单交换机结构。

Indirect Victims

As was mentioned earlier, indirect victims are the devices that communicate with the direct victims and same-path victims. To find the indirect victims, the active zoneset showed the end devices that the two Xtremio storage array ports were zoned with.与直接受害者和同路径受害者通信的设备。为了找到间接受害者，活动分区集显示了与两个就是如前所述，间接受害者Xtremio存储阵列端口分区的终端设备。

As Example 4-40shows, the active zoneset on Fab_A_MDS_9710_01 had just one additional zone containing both direct victim targets.如例 4-40 所示，Fab_A_MDS_9710_01上的活动区域集只有一个额外区域，其中包含两个直接受害目标。

Example 4-40Fabric A — Locating the end devices that were in communication with the direct victim

`show zoneset active`

zoneset name Fab_A_MDS_9710_01 _08272018 vsan 1501

...

zone name xxx943a_xio_A vsan 1501

* fcid 0x3d0180 [device-alias xxx943a_A]

* fcid 0x3d0060 [device-alias xio-sc1-fc2]

* fcid 0x3d0040 [device-alias xio-sc2-fc2]

The potential indirect victim had an FCID of 0x3d0180 in Fabric A. More details about it can be found using FCNS database. AsExample 4-41shows, it was a Linux initiator connected to fc3/40 on Fab_A_MDS_9710_01.在Fabric A中，潜在间接受害者的 FCID 为0x3d0180，有关它的更多详细信息可通过 FCNS 数据库查找。如例 4-41 所示，这是一个连接到Fab_A_MDS_9710_01上fc3/40的 Linux 启动程序。

Example 4-41Fabric A — Details about the potential indirect victim from FCNS database

` show fcns database detail `

...