Power to sever is not avalible due to a malfunctioning component dectect by CPLD

Objective: To clear ILOM FMA faults and to reset the SP.

Applies to Engineered Systems (Exadata X2, X3) and other machines where ILOM FMA are used.

Solution:

1. Log into the node ILOM and once you are at the SP prompt  

% ssh -l root <IP address of Service Processor>

2. List all known faults in the system.Example:

-> show /SP/faultmgmt

* Enter the fault management shell to obtain pertinent information about the fault.

-> start /SP/faultmgmt/shell

3. Start the Fault Management:

Are you sure you want to start /SP/faultmgmt/shell(y/n)? y

faultmgmtsp>

* Use the 'fmadm faulty' command to identify the faulty component/FRU.

4. Example of clearing a fan fault:

Show fault:

faultmgmtsp> fmadm faulty

Will list the /SYS/MB fault  withUUID

------------------- ------------------------------------ -------------- --------

Time                UUID                                 msgid          Severity

------------------- ------------------------------------ -------------- --------

2012-12-15/21:53:29 68a0c563-e609-e8fb-9fae-c03c46867474 SPX86-8002-2J  Critical

Fault class : fault.chassis.domain.boot.power-off-unexpected

FRU         : /SYS/MB              (Part Number: 511-1213-06)            

　　　　　　　　　　　　　　 (Serial Number: 0328MSL-1106BA12XY)

Description : Power to server is not available due to a malfunctioning component detected by CPLD.

Use the above UUID to clear the fault.

5. Clear the fault:

faultmgmtsp>fmadm repair 68a0c563-e609-e8fb-9fae-c03c46867474

show faults again / repeat till empty:

faultmgmtsp> fmadm faulty

Exit out of Fault Manager Shell:

faultmgmtsp> exit

After clearing the actual fault, please continue to reset the SP.

6. Reset the SP:

->reset /SP

Legend:

ILOM - Integrated Lights Out Manager

FMA - Fault Management Architecture

SP - Service Processor

You are all set!  All your faults are clear now.

Reference / Read More: URL - http://docs.oracle.com/cd/E20815_01/html/E20894/gjuqk.html Title - How to Clear Faults Using the Oracle ILOM Command-Line Interface