Procedure and problems of sand making machine

 

The rapid development of infrastructure makes the artificial sand dominates the sand and gravel industry, which promotes the demand forsand making machine. 
Sand producing procedure
Material from the hopper into the jaw crusher, the vibrating feeder or the chute feeder, the material into two elements, the center component of the sub-feeder into the high-speed rotation with the impeller, the impeller was swiftly accelerated as much as many hundred times the acceleration of gravity, and then to 60 -70 m / s from the impeller pace of the flow of 3 uniformly dispersed inside the projectile out the first four weeks using the sub-feeder component with the materials in the assortment of broken down, after which supported with shock to the vortex cavity lining materials, and could be the material lining rebound. This piece of material inside the cavity eddy damaged a number of occasions by two or even probability of influence, friction and grinding crushing impact. The material was damaged with the lower row of the discharge port. And the formation of closed loop screening system, three general circulation can be broken into 20 orders and the adhering to supplies.

As the core sand making equipment, what should we pay attention to when we are using the sand making machine?
First of all, the size of material should meet the demand when we are feeding the sand making machine. The material of larger size should not be fed in the sand making machine, otherwise, it will cause the imbalance badly wearing of the impeller, even the large material will block the impeller and the center feeding channel which will make sand making machine fail to work. So, we should remove the large material before the machine runs.
Secondly, sand making machine must be unloaded. It can not be fed until the Sand Making Machine works properly. Besides, continuous and uniform feeding is needed.
Thirdly, the lubrication of Sand Making Machine is dry oil lubrication, we should appropriate amount of grease each session of Sand Making Machine.
Finally, if there is severe vibration and abnormal noise in the running of Sand Making Machine, we should stop the running and check it promptly.
The above problems should be take care when the Sand Making Machine is working. Besides, the regular maintenance is necessary. The cost of Sand Making Machine is relatively high, scientific and rational application of Sand Making Machine is economical. Henan Hongxing Mining Machinery Co., Ltd. is a professional manufacturer and supplier of new  sand making machine with advanced process, quality assurance, reasonable price and top service. welcome customers both at home and abroad to consult and purchase!