CentOS6.5 编译安装lnmp环境

参考：http://54im.com/tag/libmcrypt

http://www.educity.cn/linux/1240338.html

  1. 设置防火墙，并开启3306 80端口：vi /etc/sysconfig/iptables && service iptables stop && service iptables start
  2. yum清缓存并更新：yum clean all && yum update
  3. 下载安装编译工具和依赖包 ： 
    yum -y install cmake gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers libXpm* wget pcre-devel zlib-devel gd-devel libjpeg-devel libpng-devel freetype-devel libxml2-devel bison automake zlib* libxml* ncurses-devel libtool-ltdl-devel* unzip
  4. 下载安装包
    1. 创建存放源码的目录 
      mkdir /opt/src && cd /opt/src
    2. wget下载程序源码
      wget http://nginx.org/download/nginx-1.7.8.tar.gz #最新 
wget http://cn2.php.net/distributions/php-5.4.36.tar.gz 
wget http://dev.mysql.com/get/Downloads/MySQL-5.6/mysql-5.6.22.tar.gz #mysql5.6 

      wget http://downloads.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fmcrypt%2Ffiles%2FLibmcrypt%2F2.5.8%2F&ts=1418528625&use_mirror=tcpdiag 

      wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz

      wget http://downloads.sourceforge.net/project/mhash/mhash/0.9.9.9/mhash-0.9.9.9.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fmhash%2Ffiles%2Fmhash%2F0.9.9.9%2F&ts=1418530194&use_mirror=hivelocity 

      wget http://downloads.sourceforge.net/project/mcrypt/MCrypt/2.6.8/mcrypt-2.6.8.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fmcrypt%2Ffiles%2FMCrypt%2F2.6.8%2F&ts=1418531968&use_mirror=softlayer-dal 

      wget http://ftp.gnu.org/gnu/bison/bison-3.0.tar.gz
      wget http://www.cmake.org/files/v3.1/cmake-3.1.0.tar.gz
      wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843&big_mirror=0"
      wget https://github.com/eaccelerator/eaccelerator/archive/master.zip -O eaccelerator.zip
      #更名
      mv libmcrypt-2.5.8.tar.gz\?r\=http\:%2F%2Fsourceforge.net%2Fprojects%2Fmcrypt%2Ffiles%2FLibmcrypt%2F2.5.8%2F libmcrypt-2.5.8.tar.gz


    3. 重命名压缩包 
      mv libmcrypt-2.5.8.tar.gz\?r\=http\:%2F%2Fsourceforge.net%2Fprojects%2Fmcrypt%2Ffiles%2FLibmcrypt%2F2.5.8%2F libmcrypt-2.5.8.tar.gz
mv mcrypt-2.6.8.tar.gz\?r\=http\:%2F%2Fsourceforge.net%2Fprojects%2Fmcrypt%2Ffiles%2FMCrypt%2F2.6.8%2F mcrypt-2.6.8.tar.gz
mv mhash-0.9.9.9.tar.gz\?r\=http\:%2F%2Fsourceforge.net%2Fprojects%2Fmhash%2Ffiles%2Fmhash%2F0.9.9.9%2F mhash-0.9.9.9.tar.gz
mv eaccelerator-0.9.6.1.tar.bz2\?r\=http\:%2F%2Fsourceforge.net%2Fprojects%2Feaccelerator%2Ffiles%2Feaccelerator%2FeAccelerator%200.9.6.1%2F eaccelerator-0.9.6.1.tar.bz2
    4. 安装libiconv、libmcrypt、libltdl、mhash、mcrypt 
       tar zxvf mhash-0.9.9.9.tar.gz && cd mhash-0.9.9.9
 ./configure && make && make install
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
       tar zxvf libmcrypt-2.5.8.tar.gz && cd libmcrypt-2.5.8
      ./configure && make && make install
      /sbin/ldconfig
      cd libltdl/
      ./configure -enable-ltdl-install
      make && make install
       tar zxvf libiconv-1.14.tar.gz && cd libiconv-1.14
      ./configure --prefix=/opt
      make && make install
    5. tar zxvf mcrypt-2.6.8.tar.gz && cd mcrypt-2.6.8
/sbin/ldconfig && ./configure && make && make install
    6. 安装cmake 
      tar zxvf cmake-3.1.0.tar.gz && cd cmake-3.1.0  && ./configure --prefix=/usr && gmake && gmake install
    7. 安装bison 
       tar zxvf bison-3.0.tar.gz && cd bison-3.0
./configure && make && make install
    8. 准备用户、目录 
      groupadd mysql
useradd -g mysql mysql
groupadd www
useradd -g www www
mkdir -p /data/mysql
chown -R mysql:mysql /data/mysql
mkdir -p /data/www
chown -R www:www /data/www
    9. 安装mysql

      1. 编译：

        tar zxvf mysql-5.6.22.tar.gz && cd mysql-5.6.22
cmake -DCMAKE_INSTALL_PREFIX=/opt/mysql -DMYSQL_DATADIR=/data/mysql -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_MEMORY_STORAGE_ENGINE=1 -DWITH_MYISAM_STORAGE_ENGINE=1 -DSYSCONFDIR=/etc/ -DWITH_SSL=yes -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_READLINE=on
make && make install && ln -s /opt/mysql/lib/lib* /usr/lib/

      2. 配置：

        /opt/mysql/scripts/mysql_install_db --basedir=/opt/mysql/ --datadir=/data/mysql --user=mysql
        cd /opt/mysql/support-files
        cp my-default.cnf /etc/my.cnf

      3. 初始化并自启动

        #初始化
cp /opt/mysql/support-files/mysql.server /etc/rc.d/init.d/mysqld
chkconfig --add mysqld
chkconfig mysqld on
#启动mysql
/etc/rc.d/init.d/mysqld start
#设置mysql登录密码
cd /opt/mysql && bin/mysql_secure_installation
    10. 安装php

      1. 编译：

        tar zxvf php-5.4.36.tar.gz && cd php-5.4.36
./configure --prefix=/opt/php --with-mysql=/opt/mysql --with-mysqli=/opt/mysql/bin/mysql_config --with-iconv-dir=/opt/src/libiconv-1.14 --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fpm --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap && make && make install
      2. 或者：./configure --prefix=/usr/local/php  --enable-fpm --with-iconv=/usr/local/bin/libiconv \--with-mcrypt=/usr/local/bin/libmcrypt \--enable-mbstring --disable-pdo --with-curl --disable-debug  --disable-rpath \--enable-inline-optimization --with-bz2  --with-zlib --enable-sockets \--enable-sysvsem --enable-sysvshm --enable-pcntl --enable-mbregex \--with-mhash --enable-zip --with-pcre-regex --with-mysql --with-mysqli \--with-gd --with-jpeg-dir
      3. 配置php.ini 
        cp php.ini-development /usr/local/php/etc/php.ini

        安装扩展

        #安装
unzip eaccelerator.zip &&  cd eaccelerator-master
./configure --enable-eaccelerator=shared --with-php-config=/opt/php/bin/php-config
make && make install

#配置
zend_extension="/opt/php/lib/php/extensions/no-debug-non-zts-20090626/eaccelerator.so"#检查是否存在
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/tmp/eaccelerator"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.log_file = "/opt/php/var/log/eaccelerator_log"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

#创建目录
mkdir -p /tmp/eaccelerator

      4. 配置php-fpm

        cp /opt/php/etc/php-fpm.conf.default /opt/php/etc/php-fpm.conf
vi /opt/php/etc/php-fpm.conf
#几处修改，user/group要设好，其它选项可以自己调整
[global]
pid = run/php-fpm.pid
error_log = log/php-fpm.log
emergency_restart_threshold = 10
emergency_restart_interval = 1m
process_control_timeout = 5s
[www]
user = www
group = www

        更改php.ini 设置时区

        vi etc/php.ini 
date.timezone = PRC
    11. 安装nginx

      1. 安装PCRE

        wget http://downloads.sourceforge.net/project/pcre/pcre/8.36/pcre-8.36.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fpcre%2Ffiles%2Fpcre%2F8.36%2F&ts=1418696677&use_mirror=iwebhttp://downloads.sourceforge.net/project/pcre/pcre/8.36/pcre-8.36.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fpcre%2Ffiles%2Fpcre%2F8.36%2F&ts=1418696677&use_mirror=iweb -O pcre-8.36.tar.gz
mv pcre-8.36.tar.gz\?r\=http\:%2F%2Fsourceforge.net%2Fprojects%2Fpcre%2Ffiles%2Fpcre%2F8.36%2F pcre-8.36.tar.gz
tar zxvf pcre-8.36.tar.gz && cd pcre-8.36
./configure make && make install
      2. 安装nginx 
        tar zxvf nginx-1.7.8.tar.gz && cd nginx-1.7.8
./configure --user=www --group=www --prefix=/opt/nginx --with-http_stub_status_module --with-http_ssl_module
make && make install
      3. 配置nginx
        1. vim /usr/local/nginx/conf/nginx.conf 
          user www www;
worker_processes  1;

error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

pid        logs/nginx.pid;


events {
    use epoll;
    worker_connections  1024;
}

http {
    include       mime.types;
    default_type  application/octet-stream;

    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
    #                  '$status $body_bytes_sent "$http_referer" '
    #                  '"$http_user_agent" "$http_x_forwarded_for"';

    #access_log  logs/access.log  main;

    sendfile        on;
    tcp_nopush     on;

    #keepalive_timeout  0;
    keepalive_timeout  65;

    gzip  on;
    gzip_min_length 1k;
    gzip_buffers 4 16k;
    gzip_comp_level 2;
    gzip_types text/plain application/x-javascript text/css application/xml;
    server {
        listen       80;
        server_name  localhost;

        #charset koi8-r;

        #access_log  logs/host.access.log  main;

        location / {
            root   /data/www;
            index  index.html index.htm index.php;
        }

        error_page  404              /404.html;

        # redirect server error pages to the static page /50x.html
        #
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #
        #location ~ \.php$ {
        #    proxy_pass   http://127.0.0.1;
        #}

        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #
        location ~ \.php$ {
            root           html;
            fastcgi_pass   127.0.0.1:9000;
            fastcgi_index  index.php;
            fastcgi_param  SCRIPT_FILENAME  /data/www$fastcgi_script_name;
            include        fastcgi_params;
        }

        # deny access to .htaccess files, if Apache's document root
        # concurs with nginx's one
        #
        #location ~ /\.ht {
        #    deny  all;
        #}
    }

           启动nginx和php-fpm

          /opt/nginx/sbin/nginx
/opt/php/sbin/php-fpm
jdhu 标记: 京东胡博客
posted @ 2014-12-16 00:16  yo胡yo  阅读(416)  评论(0)  编辑  收藏  举报