中兴交换机与H3C交换机配置链路聚合802.3ad

难得见到一回中兴交换机
中兴交换机型号： ZX8902

这台中兴要与H3C交换机建立port-channel， 接口为access vlan 100

拓扑如下：

1 中兴交换机配置

1.1 创建 smart group，对，没有看错，中兴的port-channel叫做smart-group，多么聪明的group

interface smartgroup1
  switchport access vlan 100
  smartgroup mode 802.3ad

1.2 物理端口加入smartgroup

注意： 接口下的switchport qinq normal是自动生成的，我们并没有手工添加

interface gei_1/21
  hybrid-attribute fiber
  no negotiation auto
  switchport access vlan 100
  switchport qinq normal
  smartgroup 1 mode active
!
interface gei_1/22
  hybrid-attribute fiber
  negotiation auto
  switchport access vlan 100
  switchport qinq normal
  smartgroup 1 mode active

2 华三7506交换机配置

2.1 创建 BridgeAggregation

interface Bridge-Aggregation10
 port access vlan 100
 link-aggregation mode dynamic
#

2.2 物理端口加入

interface Ten-GigabitEthernet2/0/45
 port link-mode bridge
 port access vlan 100
 port link-aggregation group 10
#
interface Ten-GigabitEthernet2/0/46
 port link-mode bridge
 port access vlan 100
 port link-aggregation group 10

3 查看命令

3.1中兴

show smartgroup

3.2 H3C

display link-aggregation summary
display link-aggregation verbose Bridge-Aggregation 10