chromedriver中的浏览器选项

There are lots of command lines which can be used with the Google Chrome browser. Some change behavior of features, others are for debugging or experimenting. This page lists the available switches including their conditions and descriptions. Last automated update occurred on 2016-10-20.

ConditionExplanation
--/prefetch:1[1]  /prefetch:# arguments to use when launching various process types. It has been observed that when file reads are consistent for 3 process launches with the same /prefetch:# argument, the Windows prefetcher starts issuing reads in batch at process launch. Because reads depend on the process type, the prefetcher wouldn't be able to observe consistent reads if no /prefetch:# arguments were used. Note that the browser process has no /prefetch:# argument; as such all other processes must have one in order to avoid polluting its profile. Note: # must always be in [1, 8]; otherwise it is ignored by the Windows prefetcher. 
--/prefetch:2[1]  No description 
--/prefetch:3[1]  No description 
--/prefetch:4[1]  No description 
--/prefetch:5[1]  /prefetch:# arguments for the browser process launched in background mode and for the watcher process. Use profiles 5, 6 and 7 as documented on kPrefetchArgument* in content_switches.cc. 
--/prefetch:6[1]  No description 
--/prefetch:8[1]  /prefetch:# argument shared by all process types that don't have their own. It is likely that the prefetcher won't work for these process types as it won't be able to observe consistent file reads across launches. However, having a valid prefetch argument for these process types is required to prevent them from interfering with the prefetch profile of the browser process. 
--0  Value of the --profiler-timing flag that will disable timing information for chrome://profiler. 
--?  No description 
--accept-resource-provider  Flag indicating that a resource provider must be set up to provide cast receiver with resources. Apps cannot start until provided resources. This flag implies --alsa-check-close-timeout=0. 
--adaboost  No description 
--aec-refined-adaptive-filter  Enables a new tuning of the WebRTC Acoustic Echo Canceler (AEC). The new tuning aims at resolving two issues with the AEC: https://bugs.chromium.org/p/webrtc/issues/detail?id=5777 https://bugs.chromium.org/p/webrtc/issues/detail?id=5778 TODO(hlundin): Remove this switch when experimentation is over; crbug.com/603821. 
--agc-startup-min-volume  Override the default minimum starting volume of the Automatic Gain Control algorithm in WebRTC used with audio tracks from getUserMedia. The valid range is 12-255. Values outside that range will be clamped to the lowest or highest valid value inside WebRTC. TODO(tommi): Remove this switch when crbug.com/555577 is fixed. 
--aggressive  No description 
--aggressive-cache-discard  No description 
--aggressive-tab-discard  No description 
--allow-cross-origin-auth-prompt  Allows third-party content included on a page to prompt for a HTTP basic auth username/password pair. 
--allow-data-roaming-by-default  If this flag is set, enable data roaming in the cellular network by default upon system start if it's an unmanaged device. This flag is used by Rialto device to obtain device policy during OOBE since the Rialto device has no display and and only connects over cell. 
--allow-external-pages  Allow access to external pages during layout tests. 
--allow-failed-policy-fetch-for-test  If this flag is passed, failed policy fetches will not cause profile initialization to fail. This is useful for tests because it means that tests don't have to mock out the policy infrastructure. 
--allow-file-access  On ChromeOS, file:// access is disabled except for certain whitelisted directories. This switch re-enables file:// for testing. 
--allow-file-access-from-files  By default, file:// URIs cannot read other file:// URIs. This is an override for developers who need the old behavior for testing. 
--allow-hidden-media-playback  Allows media playback for hidden WebContents 
--allow-http-background-page  Allows non-https URL for background_page for hosted apps. 
--allow-http-screen-capture  Allow non-secure origins to use the screen capture API and the desktopCapture extension API. 
--allow-insecure-localhost  Enables TLS/SSL errors on localhost to be ignored (no interstitial, no blocking of requests). 
--allow-legacy-extension-manifests  Allows the browser to load extensions that lack a modern manifest when that would otherwise be forbidden. 
--allow-loopback-in-peer-connection  Allows loopback interface to be added in network list for peer connection. 
--allow-nacl-crxfs-api[2]  Specifies comma-separated list of extension ids or hosts to grant access to CRX file system APIs. 
--allow-nacl-file-handle-api[2]  Specifies comma-separated list of extension ids or hosts to grant access to file handle APIs. 
--allow-nacl-socket-api[2]  Specifies comma-separated list of extension ids or hosts to grant access to TCP/UDP socket APIs. 
--allow-no-sandbox-job  Enables the sandboxed processes to run without a job object assigned to them. This flag is required to allow Chrome to run in RemoteApps or Citrix. This flag can reduce the security of the sandboxed processes and allow them to do certain API calls like shut down Windows or access the clipboard. Also we lose the chance to kill some processes until the outer job that owns them finishes. 
--allow-non-localhost  No description 
--allow-outdated-plugins  Don't block outdated plugins. 
--allow-ra-in-dev-mode  Allows remote attestation (RA) in dev mode for testing purpose. Usually RA is disabled in dev mode because it will always fail. However, there are cases in testing where we do want to go through the permission flow even in dev mode. This can be enabled by this flag. 
--allow-running-insecure-content  By default, an https page cannot run JavaScript, CSS or plugins from http URLs. This provides an override to get the old insecure behavior. 
--allow-sandbox-debugging  Allows debugging of sandboxed processes (see zygote_main_linux.cc). 
--allow-silent-push  Allows Web Push notifications that do not show a notification. 
--alsa-check-close-timeout  Time in ms to wait before closing the PCM handle when no more mixer inputs remain. Assumed to be 0 if --accept-resource-provider is present. 
--alsa-enable-upsampling  Flag that enables resampling audio with sample rate below 32kHz up to 48kHz. Should be set to true for internal audio products. 
--alsa-fixed-output-sample-rate  Optional flag to set a fixed sample rate for the alsa device. 
--alsa-input-device[3]  The Alsa device to use when opening an audio input stream. 
--alsa-output-avail-min  Minimum number of available frames for scheduling a transfer. 
--alsa-output-buffer-size  Size of the ALSA output buffer in frames. This directly sets the latency of the output device. Latency can be calculated by multiplying the sample rate by the output buffer size. 
--alsa-output-device[3]  The Alsa device to use when opening an audio stream. 
--alsa-output-period-size  Size of the ALSA output period in frames. The period of an ALSA output device determines how many frames elapse between hardware interrupts. 
--alsa-output-start-threshold  How many frames need to be in the output buffer before output starts. 
--also-emit-success-logs  Also emit full event trace logs for successful tests. 
--always-authorize-plugins  Prevents Chrome from requiring authorization to run certain widely installed but less commonly used plugins. 
--always-on  No description 
--always-use-complex-text  Always use the complex text path for layout tests. 
--alwaystrue  No description 
--android-fonts-path  Uses the android SkFontManager on linux. The specified directory should include the configuration xml file with the name "fonts.xml". This is used in blimp to emulate android fonts on linux. 
--angle  No description 
--app  Specifies that the associated value should be launched in "application" mode. 
--app-id  Specifies that the extension-app with the specified id should be launched according to its configuration. 
--app-mode-auth-code  Value of GAIA auth code for --force-app-mode. 
--app-mode-oauth-token  Value of OAuth2 refresh token for --force-app-mode. 
--app-mode-oem-manifest  Path for app's OEM manifest file. 
--app-shell-allow-roaming  Allow roaming in the cellular network. 
--app-shell-host-window-size  Size for the host window to create (i.e. "800x600"). 
--app-shell-preferred-network  SSID of the preferred WiFi network. 
--app-shell-refresh-token  Refresh token for identity API calls for the current user. Used for testing. 
--app-shell-user  User email address of the current user. 
--apple  No description 
--apps-keep-chrome-alive-in-tests[4]  Prevents Chrome from quitting when Chrome Apps are open. 
--arc-available  Signals the availability of the ARC instance on this device. 
--arc-use-auth-endpoint  Specifies ARC authorization endpoint to enable automatic sign-in in OptIn flow. 
--artifacts-dir  Screenshot testing: specifies the directoru where artifacts will be stored. 
--ash-animate-from-boot-splash-screen  Enables an animated transition from the boot splash screen (Chrome logo on a white background) to the login screen. Implies |kAshCopyHostBackgroundAtBoot| and doesn't make much sense if used in conjunction with |kDisableBootAnimation| (since the transition begins at the same time as the white/grayscale login screen animation). 
--ash-copy-host-background-at-boot  Copies the host window's content to the system background layer at startup. Can make boot slightly slower, but also hides an even-longer awkward period where we display a white background if the login wallpaper takes a long time to load. 
--ash-debug-shortcuts  Enable keyboard shortcuts useful for debugging. 
--ash-dev-shortcuts  Enable keyboard shortcuts used by developers only. 
--ash-disable-maximize-mode-window-backdrop  Disables the window backdrops normally used in maximize mode (TouchView). 
--ash-disable-screen-orientation-lock[5]  Disable the support for WebContents to lock the screen orientation. 
--ash-disable-touch-exploration-mode  Disable the Touch Exploration Mode. Touch Exploration Mode will no longer be turned on automatically when spoken feedback is enabled when this flag is set. 
--ash-enable-fullscreen-app-list[5]  Enables fullscreen app list if Ash is in maximize mode. 
--ash-enable-magnifier-key-scroller[5]  Enables key bindings to scroll magnified screen. 
--ash-enable-mirrored-screen  Enables mirrored screen. 
--ash-enable-palette[5]  Enables the palette next to the status area. 
--ash-enable-palette-on-all-displays[5]  Enables the palette on every display, instead of only the internal one. 
--ash-enable-software-mirroring  Enables software based mirroring. 
--ash-enable-touch-view-testing  Enables touch view testing. TODO(skuhne): Remove DEBUG_TOGGLE_TOUCH_VIEW accelerator once this flag is removed. 
--ash-enable-unified-desktop[5]  Enables unified desktop mode. 
--ash-hide-notifications-for-factory  Hides notifications that are irrelevant to Chrome OS device factory testing, such as battery level updates. 
--ash-host-window-bounds  Sets a window size, optional position, and optional scale factor. "1024x768" creates a window of size 1024x768. "100+200-1024x768" positions the window at 100,200. "1024x768*2" sets the scale factor to 2 for a high DPI display. "800,0+800-800x800" for two displays at 800x800 resolution. "800,0+800-800x800,0+1600-800x800" for three displays at 800x800 resolution. 
--ash-md  Specifies if Material Design elements in Chrome OS system UI are enabled. Can be disabled / enabled / experimental allowing to launch incrementally. 
--ash-touch-hud  Enables the heads-up display for tracking touch points. 
--ash-webui-init  When wallpaper boot animation is not disabled this switch is used to override OOBE/sign in WebUI init type. Possible values: parallel|postpone. Default: parallel. 
--async-on-draw-hardware  No description 
--audio-buffer-size  Allow users to specify a custom buffer size for debugging purpose. 
--aura-legacy-power-button  (Most) Chrome OS hardware reports ACPI power button releases correctly. Standard hardware reports releases immediately after presses. If set, we lock the screen or shutdown the system immediately in response to a press instead of displaying an interactive animation. 
--auth-ext-path  Enables overriding the path for the default authentication extension. 
--auth-server-whitelist  Whitelist for Negotiate Auth servers 
--auth-spnego-account-type[6]  Android authentication account type for SPNEGO authentication 
--auto  The values the kTouchEvents switch may have, as in --touch-events=disabled. auto: enabled at startup when an attached touchscreen is present. 
--auto-open-devtools-for-tabs  This flag makes Chrome auto-open DevTools window for each tab. It is intended to be used by developers and automation to not require user interaction for opening DevTools. 
--auto-select-desktop-capture-source  This flag makes Chrome auto-select the provided choice when an extension asks permission to start desktop capture. Should only be used for tests. For instance, --auto-select-desktop-capture-source="Entire screen" will automatically select to share the entire screen in English locales. 
--blimp-client-token-path  No description 
--bootstrap  Values for the kExtensionContentVerification flag. See ContentVerifierDelegate::Mode for more explanation.
--browser-subprocess-path  Path to the exe to run for the renderer and plugin subprocesses. 
--browser-test  Tells Content Shell that it's running as a content_browsertest. 
--bwsi  Indicates that the browser is in "browse without sign-in" (Guest session) mode. Should completely disable extensions, sync and bookmarks. 
--bypass-app-banner-engagement-checks  This flag causes the user engagement checks for showing app banners to be bypassed. It is intended to be used by developers who wish to test that their sites otherwise meet the criteria needed to show app banners. 
--canvas-msaa-sample-count  The number of MSAA samples for canvas2D. Requires MSAA support by GPU to have an effect. 0 disables MSAA. 
--cast-initial-screen-height  No description 
--cast-initial-screen-width  Used to pass initial screen resolution to GPU process. This allows us to set screen size correctly (so no need to resize when first window is created). 
--cc-layer-tree-test-long-timeout  Increases timeout for memory checkers. 
--cc-layer-tree-test-no-timeout  Prevents the layer tree unit tests from timing out. 
--cc-rebaseline-pixeltests  Makes pixel tests write their output instead of read it. 
--cellular-only  No description 
--check-for-update-interval  How often (in seconds) to check for updates. Should only be used for testing purposes. 
--check-layout-test-sys-deps  Check whether all system dependencies for running layout tests are met. 
--child-process  Used internally by the main process to indicate that a new process should be a child process. Takes the absolute path to the service library to load as an argument. Not for user use. 
--child-wallpaper-large  Default large wallpaper to use for kids accounts (as path to trusted, non-user-writable JPEG file). 
--child-wallpaper-small  Default small wallpaper to use for kids accounts (as path to trusted, non-user-writable JPEG file). 
--ChromeOSMemoryPressureHandling  The memory pressure thresholds selection which is used to decide whether and when a memory pressure event needs to get fired. 
--cipher-suite-blacklist  Comma-separated list of SSL cipher suites to disable. 
--class[7]  The same as the --class argument in X applications. Overrides the WM_CLASS window property with the given value. 
--clear-data-reduction-proxy-data-savings  Clear data savings on Chrome startup. 
--clear-token-service  Clears the token service before using it. This allows simulating the expiration of credentials during testing.
--cloud-print-file  Tells chrome to display the cloud print dialog and upload the specified file for printing. 
--cloud-print-file-type  Specifies the mime type to be used when uploading data from the file referenced by cloud-print-file. Defaults to "application/pdf" if unspecified. 
--cloud-print-job-title  Used with kCloudPrintFile to specify a title for the resulting print job. 
--cloud-print-print-ticket  Used with kCloudPrintFile to specify a JSON print ticket for the resulting print job. Defaults to null if unspecified. 
--cloud-print-setup-proxy  Setup cloud print proxy for provided printers. This does not start service or register proxy for autostart. 
--cloud-print-url  The URL of the cloud print service to use, overrides any value stored in preferences, and the default. Only used if the cloud print service has been enabled. Used for testing. 
--cloud-print-xmpp-endpoint  The XMPP endpoint the cloud print service will use. Only used if the cloud print service has been enabled. Used for testing. 
--compensate-for-unstable-pinch-zoom  Enable compensation for unstable pinch zoom. Some touch screens display significant amount of wobble when moving a finger in a straight line. This makes two finger scroll trigger an oscillating pinch zoom. See crbug.com/394380 for details. 
--compile-shader-always-succeeds  Always return success when compiling a shader. Linking will still fail. 
--component-updater  Comma-separated options to troubleshoot the component updater. Only valid for the browser process. 
--connectivity-check-url  Url for network connectivity checking. Default is "https://clients3.google.com/generate_204". 
--conservative  No description 
--content-image-texture-target  Texture target for CHROMIUM_image backed content textures. 
--content-shell-host-window-size  Size for the content_shell's host window (i.e. "800x600"). 
--controller  No description 
--crash-dumps-dir  The directory breakpad should store minidumps in. 
--crash-on-failure  When specified to "enable-leak-detection" command-line option, causes the leak detector to cause immediate crash when found leak. 
--crash-on-hang-threads  Comma-separated list of BrowserThreads that cause browser process to crash if the given browser thread is not responsive. UI,IO,DB,FILE,CACHE are the list of BrowserThreads that are supported. For example: --crash-on-hang-threads=UI:3:18,IO:3:18 --> Crash the browser if UI or IO is not responsive for 18 seconds and the number of browser threads that are responding is less than or equal to 3. 
--crash-server-url  Server url to upload crash data to. Default is "http://clients2.google.com/cr/report" for prod devices. Default is "http://clients2.google.com/cr/staging_report" for non prod. 
--crash-test  Causes the browser process to crash on startup. 
--crashpad-handler  A process type (switches::kProcessType) that indicates chrome.exe or setup.exe is being launched as crashpad_handler. This is only used on Windows. We bundle the handler into chrome.exe on Windows because there is high probability of a "new" .exe being blocked or interfered with by application firewalls, AV software, etc. On other platforms, crashpad_handler is a standalone executable. 
--create-browser-on-startup-for-tests  Some platforms like ChromeOS default to empty desktop. Browser tests may need to add this switch so that at least one browser instance is created on startup. TODO(nkostylev): Investigate if this switch could be removed. (http://crbug.com/148675) 
--cros-region  Forces CrOS region value. 
--cros-regions-mode  Control regions data load ("" is default). 
--cryptauth-http-host  Overrides the default URL for Google APIs (https://www.googleapis.com) used by CryptAuth. 
--cs-contextual-cards-bar-integration[6]  Enables Contextual Search UI integration with Contextual Cards data. 
--custom-launcher-page  Specifies the chrome-extension:// URL for the contents of an additional page added to the app launcher. 
--custom_summary[6]  Forces a custom summary to be displayed below the update menu item. 
--d3d11  No description 
--d3d9  No description 
--daemon  No description 
--daemon-pipe  No description 
--data-path  Makes Content Shell use the given path for its data directory. 
--data-reduction-proxy-config-url  The URL from which to retrieve the Data Reduction Proxy configuration. 
--data-reduction-proxy-experiment  The name of a Data Reduction Proxy experiment to run. These experiments are defined by the proxy server. Use --force-fieldtrials for Data Reduction Proxy field trials. 
--data-reduction-proxy-http-proxies  The semicolon-separated list of proxy server URIs to override the list of HTTP proxies returned by the Data Saver API. It is illegal to use |kDataReductionProxy| or |kDataReductionProxyFallback| switch in conjunction with |kDataReductionProxyHttpProxies|. If the URI omits a scheme, then the proxy server scheme defaults to HTTP, and if the port is omitted then the default port for that scheme is used. E.g. "http://foo.net:80", "http://foo.net", "foo.net:80", and "foo.net" are all equivalent. 
--data-reduction-proxy-lo-fi  The mode for Data Reduction Proxy Lo-Fi. The various modes are always-on, cellular-only, slow connections only and disabled. 
--data-reduction-proxy-pingback-url  No description 
--data-reduction-proxy-secure-proxy-check-url  Sets a secure proxy check URL to test before committing to using the Data Reduction Proxy. Note this check does not go through the Data Reduction Proxy. 
--data-reduction-proxy-secure-proxy-disabled  Starts the secure Data Reduction Proxy in the disabled state until the secure proxy check succeeds. 
--data-reduction-proxy-server-experiments-disabled  Disables server experiments that may be enabled through field trial. 
--data-reduction-proxy-warmup-url  Sets a URL to fetch to warm up the data reduction proxy on startup and network changes. 
--dbus-stub  Forces the stub implementation of dbus clients. 
--debug-devtools  Run devtools tests in debug mode (not bundled and minified) 
--debug-enable-frame-toggle  Enables a frame context menu item that toggles the frame in and out of glass mode (Windows Vista and up only). 
--debug-packed-apps  Adds debugging entries such as Inspect Element to context menus of packed apps. 
--debug-print[8]  Enables support to debug printing subsystem. 
--default  No description 
--default-tile-height  No description 
--default-tile-width  Sets the tile size used by composited layers. 
--default-wallpaper-is-oem  Indicates that the wallpaper images specified by kAshDefaultWallpaper{Large,Small} are OEM-specific (i.e. they are not downloadable from Google). 
--default-wallpaper-large  Default large wallpaper to use (as path to trusted, non-user-writable JPEG file). 
--default-wallpaper-small  Default small wallpaper to use (as path to trusted, non-user-writable JPEG file). 
--demo  Optional value for Data Saver prompt on cellular networks. 
--derelict-detection-timeout  Time in seconds before a machine at OOBE is considered derelict. 
--derelict-idle-timeout  Time in seconds before a derelict machines starts demo mode. 
--desktop  No description 
--desktop-window-1080p  When present, desktop cast_shell will create 1080p window (provided display resolution is high enough). Otherwise, cast_shell defaults to 720p. 
--deterministic-fetch  Instructs headless_shell to cause network fetches to complete in order of creation. This removes a significant source of network related non-determinism at the cost of slower page loads. 
--device-management-url  Specifies the URL at which to fetch configuration policy from the device management backend. 
--device-scale-factor[1]  Device scale factor passed to certain processes like renderers, etc. 
--devtools-flags  Passes command line parameters to the DevTools front-end. 
--diagnostics  Triggers a plethora of diagnostic modes. 
--diagnostics-format  Sets the output format for diagnostic modes enabled by diagnostics flag. 
--diagnostics-recovery  Tells the diagnostics mode to do the requested recovery step(s). 
--disable  Values for the kShowSavedCopy flag. 
--disable-2d-canvas-clip-aa  Disable antialiasing on 2d canvas clips 
--disable-2d-canvas-image-chromium  Disables Canvas2D rendering into a scanout buffer for overlay support. 
--disable-3d-apis  Disables client-visible 3D APIs, in particular WebGL and Pepper 3D. This is controlled by policy and is kept separate from the other enable/disable switches to avoid accidentally regressing the policy support for controlling access to these APIs. 
--disable-about-in-settings  When kEnableSettingsWindow is used, About is shown as an overlay in Settings instead of as a separate page, unless this flag is specified. 
--disable-accelerated-2d-canvas  Disable gpu-accelerated 2d canvas. 
--disable-accelerated-jpeg-decoding  Disable partially decoding jpeg images using the GPU. At least YUV decoding will be accelerated when not using this flag. Has no effect unless GPU rasterization is enabled. 
--disable-accelerated-mjpeg-decode  Disable hardware acceleration of mjpeg decode for captured frame, where available. 
--disable-accelerated-video-decode  Disables hardware acceleration of video decode, where available. 
--disable-account-consistency  Disables consistent identity features. 
--disable-add-to-shelf  Disables the display of a banner allowing the user to add a web app to their shelf (or platform-specific equivalent) 
--disable-all-bookmarks-view  Disables all bookmarks view in bookmark manager. 
--disable-app-info-dialog-mac[4]  Disable the toolkit-views App Info dialog for Mac. 
--disable-app-list-dismiss-on-blur  If set, the app list will not be dismissed when it loses focus. This is useful when testing the app list or a custom launcher page. It can still be dismissed via the other methods (like the Esc key). 
--disable-app-window-cycling[4]  Disables custom Cmd+` window cycling for platform apps and hosted apps. 
--disable-appcontainer  No description 
--disable-arc-data-wipe  Disables android user data wipe on opt out. 
--disable-arc-opt-in-verification  Disables ARC Opt-in verification process and ARC is enabled by default. 
--disable-audio-support-for-desktop-share  No description 
--disable-autofill-keyboard-accessory-view[6] Disables showing suggestions in a keyboard accessory view. 
--disable-background-networking  Disable several subsystems which run network requests in the background. This is for use when doing network performance testing to avoid noise in the measurements. 
--disable-background-timer-throttling  Disable task throttling of timer tasks from background pages. 
--disable-backing-store-limit  Disable limits on the number of backing stores. Can prevent blinking for users with many windows/tabs and lots of memory. 
--disable-boot-animation  Disables wallpaper boot animation (except of OOBE case). 
--disable-breakpad  Disables the crash reporting. 
--disable-browser-task-scheduler  No description 
--disable-bundled-ppapi-flash  Disables the bundled PPAPI version of Flash. 
--disable-cached-picture-raster  Disables the use of a cached picture for raster in the renderer, making raster go directly from the display item list (this is the data structure surfaced to tracing). This is useful for debugging to remove the cached picture from the pipeline to narrow down bugs. 
--disable-canvas-aa  Disable antialiasing on 2d canvas. 
--disable-captive-portal-bypass-proxy  Disables bypass proxy for captive portal authorization. 
--disable-cast-streaming-hw-encoding  Disable hardware encoding support for Cast Streaming. 
--disable-child-account-detection  Disables detection of child accounts. 
--disable-clear-browsing-data-counters  Disables data volume counters in the Clear Browsing Data dialog. 
--disable-client-side-phishing-detection  Disables the client-side phishing detection feature. Note that even if client-side phishing detection is enabled, it will only be active if the user has opted in to UMA stats and SafeBrowsing is enabled in the preferences. 
--disable-cloud-import  Disables cloud backup feature. 
--disable-component-cloud-policy  Disables fetching and storing cloud policy for components. 
--disable-component-extensions-with-background-pages  Disable default component extensions with background pages - useful for performance tests where these pages may interfere with perf results. 
--disable-component-update  No description 
--disable-composited-antialiasing  Disables layer-edge anti-aliasing in the compositor. 
--disable-d3d11  Disables use of D3D11. 
--disable-databases  Disables HTML5 DB support. 
--disable-datasaver-prompt  Disables Data Saver prompt on cellular networks. 
--disable-default-apps  Disables installation of default apps on first run. This is used during automated testing. 
--disable-demo-mode  Disables the Chrome OS demo. 
--disable-desktop-capture-picker-new-ui  Disable new UI for desktop capture picker window. 
--disable-device-disabling  If this switch is set, the device cannot be remotely disabled by its owner. 
--disable-device-discovery-notifications  Disables device discovery notifications. 
--disable-dinosaur-easter-egg  Disables the dinosaur easter egg on the offline interstitial. 
--disable-direct-composition  Disables the use of DirectComposition to draw to the screen. 
--disable-directwrite-for-ui[1]  Disables DirectWrite font rendering for general UI elements. 
--disable-display-color-calibration[5]  No description 
--disable-display-list-2d-canvas  No description 
--disable-distance-field-text  Disables distance field text. 
--disable-domain-blocking-for-3d-apis  Disable the per-domain blocking for 3D APIs after GPU reset. This switch is intended only for tests. 
--disable-domain-reliability  Disables Domain Reliability Monitoring. 
--disable-drive-search-in-app-launcher  No description 
--disable-dwm-composition  Disables use of DWM composition for top level windows. 
--disable-eol-notification  Disables notification when device is in end of life status. 
--disable-es3-gl-context  Disables use of ES3 backend (use ES2 backend instead). 
--disable-extensions  Disable extensions. 
--disable-extensions-except  Disable extensions except those specified in a comma-separated list. 
--disable-extensions-file-access-check  Disable checking for user opt-in for extensions that want to inject script into file URLs (ie, always allow it). This is used during automated testing. 
--disable-extensions-http-throttling  Disable the net::URLRequestThrottlerManager functionality for requests originating from extensions. 
--disable-fast-web-scroll-view-insets  Disables a workaround for fast inset updates for UIWebView.scrollView. 
--disable-features  Lists separated by commas the name of features to disable. See base::FeatureList::InitializeFromCommandLine for details. 
--disable-field-trial-config  Disable field trial tests configured in fieldtrial_testing_config.json. 
--disable-file-system  Disable FileSystem API. 
--disable-files-quick-view  Disables quick view in Files app. 
--disable-flash-3d  Disable 3D inside of flapper. 
--disable-flash-stage3d  Disable Stage3D inside of flapper. 
--disable-fullscreen-low-power-mode[4]  Disables fullscreen low power mode on Mac. 
--disable-fullscreen-tab-detaching[4]  Disables tab detaching in fullscreen mode on Mac. 
--disable-gaia-services  Disables GAIA services such as enrollment and OAuth session restore. Used by 'fake' telemetry login. 
--disable-gdi-text-printing[1]  Disables using GDI to print text as simply text. Fallback to printing text as paths. 
--disable-gesture-editing  No description 
--disable-gesture-requirement-for-media-playback  Disable user gesture requirement for media playback. 
--disable-gesture-requirement-for-presentation  Disable user gesture requirement for presentation. 
--disable-gesture-typing  No description 
--disable-gl-drawing-for-tests  Disables GL drawing operations which produce pixel output. With this the GL output will not be correct but tests will run faster. 
--disable-gl-error-limit  Disable the GL error log limit. 
--disable-gl-extensions  Disables specified comma separated GL Extensions if found. 
--disable-glsl-translator  Disable the GLSL translator. 
--disable-gpu  Disables GPU hardware acceleration. If software renderer is not in place, then the GPU process won't launch. 
--disable-gpu-async-worker-context  Disable async GL worker context. Overrides kEnableGpuAsyncWorkerContext. 
--disable-gpu-compositing  Prevent the compositor from using its GPU implementation. 
--disable-gpu-driver-bug-workarounds  Disable workarounds for various GPU driver bugs. 
--disable-gpu-early-init  Disable proactive early init of GPU process. 
--disable-gpu-memory-buffer-compositor-resources  Do not force that all compositor resources be backed by GPU memory buffers. 
--disable-gpu-memory-buffer-video-frames Disable GpuMemoryBuffer backed VideoFrames. 
--disable-gpu-process-crash-limit  Disable the limit on the number of times the GPU process may be restarted This switch is intended only for tests. 
--disable-gpu-program-cache  Turn off gpu program caching 
--disable-gpu-rasterization  Disable GPU rasterization, i.e. rasterize on the CPU only. Overrides the kEnableGpuRasterization and kForceGpuRasterization flags. 
--disable-gpu-sandbox  Disable the GPU process sandbox. 
--disable-gpu-shader-disk-cache  Disables the GPU shader on disk cache. 
--disable-gpu-vsync  Stop the GPU from synchronizing on the vsync before presenting. We can select from the options below: beginframe: Next frame can start without any delay on cc::scheduler in renderer compositors. gpu: Disable display and browser vsync. default: Set both flags. 
--disable-gpu-watchdog  Disable the thread that crashes the GPU process if it stops responding to messages. 
--disable-hang-monitor  Suppresses hang monitor dialogs in renderer processes. This may allow slow unload handlers on a page to prevent the tab from closing, but the Task Manager can be used to terminate the offending process in this case. 
--disable-hid-detection-on-oobe  Disables HID-detection OOBE screen. 
--disable-hide-inactive-stacked-tab-close-buttons  Disable hiding the close buttons of inactive tabs when the tabstrip is in stacked mode. 
--disable-histogram-customizer  Disable the RenderThread's HistogramCustomizer. 
--disable-hosted-app-shim-creation[4]  Disables app shim creation for hosted apps on Mac. 
--disable-hosted-apps-in-windows[4]  Prevents hosted apps from being opened in windows on Mac. 
--disable-http2  Disables the HTTP/2 protocol. 
--disable-icon-ntp  Disables large icons on the New Tab page. 
--disable-in-process-stack-traces  Disable in-process stack traces. 
--disable-infobars  Prevent infobars from appearing. 
--disable-input-view  No description 
--disable-ios-password-generation  Disable password generation for iOS. 
--disable-ios-password-suggestions  Disable showing available password credentials in the keyboard accessory view when focused on form fields.
--disable-ios-physical-web  Disables Physical Web scanning for nearby URLs. 
--disable-javascript-harmony-shipping  Disable latest shipping ECMAScript 6 features. 
--disable-kill-after-bad-ipc  Don't kill a child process when it sends a bad IPC message. Apart from testing, it is a bad idea from a security perspective to enable this switch. 
--disable-lcd-text  Disables LCD text. 
--disable-legacy-window[1]  Disable the Legacy Window which corresponds to the size of the WebContents. 
--disable-local-storage  Disable LocalStorage. 
--disable-logging  Force logging to be disabled. Logging is enabled by default in debug builds. 
--disable-login-animations  Avoid doing expensive animations upon login. 
--disable-low-end-device-mode  Force disabling of low-end device mode when set. 
--disable-low-res-tiling  When using CPU rasterizing disable low resolution tiling. This uses less power, particularly during animations, but more white may be seen during fast scrolling especially on slower devices. 
--disable-lru-snapshot-cache  Disable the snapshots lru cache. 
--disable-mac-overlays[9]  Fall back to using CAOpenGLLayers display content, instead of the IOSurface based overlay display path. 
--disable-mac-views-native-app-windows[4] Disables use of toolkit-views based native app windows. 
--disable-main-frame-before-activation  Disables sending the next BeginMainFrame before the previous commit activates. Overrides the kEnableMainFrameBeforeActivation flag. 
--disable-md-oobe  Disables material design OOBE UI. 
--disable-media-suspend  No description 
--disable-merge-key-char-events[1]  Disables merging the key event (WM_KEY*) with the char event (WM_CHAR). 
--disable-minimize-on-second-launcher-item-click  Disable the behavior that the second click on a launcher item (the click when the item is already active) minimizes the item. 
--disable-mtp-write-support  Disables mtp write support. 
--disable-multi-display-layout  Disables the multiple display layout UI. 
--disable-namespace-sandbox  Disables usage of the namespace sandbox. 
--disable-native-gpu-memory-buffers  Disables native GPU memory buffer support. 
--disable-network-portal-notification  Disables notifications about captive portals in session. 
--disable-new-bookmark-apps  Disables the new bookmark app system. 
--disable-new-channel-switcher-ui  Disables new channel switcher UI. 
--disable-new-kiosk-ui  Disables new Kiosk UI when kiosk apps are represented as user pods. 
--disable-new-korean-ime  Disables the new Korean IME in chrome://settings/languages. 
--disable-new-profile-management  Disables new profile management system, including new profile chooser UI. 
--disable-new-zip-unpacker  Disables the new File System Provider API based ZIP unpacker. 
--disable-notifications  Disables the Web Notification and the Push APIs. 
--disable-nv12-dxgi-video  Disables the video decoder from drawing to an NV12 textures instead of ARGB. 
--disable-offer-store-unmasked-wallet-cards Force hiding the local save checkbox in the autofill dialog box for getting the full credit card number for a wallet card. The card will never be stored locally. 
--disable-offer-upload-credit-cards  Disables offering to upload credit cards. 
--disable-office-editing-component-extension Disables Office Editing for Docs, Sheets & Slides component app so handlers won't be registered, making it possible to install another version for testing. 
--disable-offline-auto-reload  Disable auto-reload of error pages if offline. 
--disable-offline-auto-reload-visible-only  Disable only auto-reloading error pages when the tab is visible. 
--disable-out-of-process-pac  Disable out-of-process V8 proxy resolver. 
--disable-overlay-scrollbar  Disables overlay scrollbars on Aura or Linux. Does nothing on Mac. 
--disable-overscroll-edge-effect[6]  Disable overscroll edge effects like those found in Android views. 
--disable-panel-fitting[5]  Disables panel fitting (used for mirror mode). 
--disable-partial-raster  Disable partial raster in the renderer. Disabling this switch also disables the use of persistent gpu memory buffers. 
--disable-password-generation  Disables password generation when we detect that the user is going through account creation. 
--disable-payment-request  Disable the Payment Request API. 
--disable-pepper-3d  Disable Pepper3D. 
--disable-pepper-3d-image-chromium  Disable Image Chromium for Pepper 3d. 
--disable-per-monitor-dpi[1]  Disables per monitor DPI for supported Windows versions. This flag overrides kEnablePerMonitorDpi. 
--disable-permission-action-reporting  Disables permission action reporting to Safe Browsing servers for opted in users. 
--disable-permissions-api  Disables the Permissions API. 
--disable-permissions-blacklist  Disables the Permissions Blacklist, which blocks access to permissions for blacklisted sites. 
--disable-physical-keyboard-autocorrect  Disables suggestions while typing on a physical keyboard. 
--disable-pinch  Disables compositor-accelerated touch-screen pinch gestures. 
--disable-pnacl-crash-throttling  Disables crash throttling for Portable Native Client. 
--disable-policy-key-verification  Disables the verification of policy signing keys. TODO(atwilson): Remove this once all test servers have been updated to produce verification signatures. 
--disable-popup-blocking  Disable pop-up blocking. 
--disable-prefer-compositing-to-lcd-text  Disable the creation of compositing layers when it would prevent LCD text. 
--disable-presentation-api  Disables the Presentation API. 
--disable-print-preview  Disables print preview (For testing, and for users who don't like us. :[ ) 
--disable-prompt-on-repost  Normally when the user attempts to navigate to a page that was the result of a post we prompt to make sure they want to. This switch may be used to disable that check. This switch is used during automated testing. 
--disable-pull-to-refresh-effect[6]  Disable the pull-to-refresh effect when vertically overscrolling content. 
--disable-push-api-background-mode  Enable background mode for the Push API. 
--disable-qr-scanner  Disables the QR Code scanner. 
--disable-quic  Disables the QUIC protocol. 
--disable-quic-port-selection  Disable use of Chromium's port selection for the ephemeral port via bind(). This only has an effect if QUIC protocol is enabled. 
--disable-reading-from-canvas  Taints all <canvas> elements, regardless of origin. 
--disable-remote-core-animation[9]  Disable use of cross-process CALayers to display content directly from the GPU process on Mac. 
--disable-remote-fonts  Disables remote web font support. SVG font should always work whether this option is specified or not. 
--disable-renderer-accessibility  Turns off the accessibility in the renderer. 
--disable-renderer-backgrounding  Prevent renderer process backgrounding when set. 
--disable-resize-lock  Whether the resize lock is disabled. Default is false. This is generally only useful for tests that want to force disabling. 
--disable-rgba-4444-textures  Disables RGBA_4444 textures. 
--disable-rollback-option  Disables rollback option on reset screen. 
--disable-rtc-smoothness-algorithm  Disables the new rendering algorithm for webrtc, which is designed to improve the rendering smoothness.
--disable-screen-orientation-lock[6]  Disable the locking feature of the screen orientation API. 
--disable-seccomp-filter-sandbox  Disable the seccomp filter sandbox (seccomp-bpf) (Linux only). 
--disable-settings-window  Disable settings in a separate browser window per profile (see SettingsWindowEnabled() below). 
--disable-setuid-sandbox  Disable the setuid sandbox (Linux only). 
--disable-shader-name-hashing  Turn off user-defined name hashing in shaders. 
--disable-shared-workers  Disable shared workers. 
--disable-signin-scoped-device-id  Disables sending signin scoped device id to LSO with refresh token request. 
--disable-single-click-autofill  The "disable" flag for kEnableSingleClickAutofill. 
--disable-site-engagement-service  Disables the Site Engagement service, which records interaction with sites and allocates certain resources accordingly. 
--disable-smart-virtual-keyboard  No description 
--disable-smooth-scrolling  Disable smooth scrolling for testing. 
--disable-software-rasterizer  Disables the use of a 3D software rasterizer. 
--disable-speech-api  Disables the Web Speech API. 
--disable-spotlight-actions  Disables the Spotlight actions. 
--disable-sync  Disables syncing browser data to a Google Account. 
--disable-sync-app-list  No description 
--disable-sync-types  Disables syncing one or more sync data types that are on by default. See sync/base/model_type.h for possible types. Types should be comma separated, and follow the naming convention for string representation of model types, e.g.: --disable-synctypes='Typed URLs, Bookmarks, Autofill Profiles' 
--disable-system-timezone-automatic-detection  Disables SystemTimezoneAutomaticDetection policy. 
--disable-tab-for-desktop-share  Enables tab for desktop sharing. 
--disable-tab-switcher  Disables the tab switcher. 
--disable-threaded-animation  No description 
--disable-threaded-compositing  Disable multithreaded GPU compositing of web content. 
--disable-threaded-scrolling  Disable multithreaded, compositor scrolling of web content. 
--disable-timezone-tracking-option  Disables automatic timezone update. 
--disable-touch-adjustment  Disables touch adjustment. 
--disable-touch-drag-drop  Disables touch event based drag and drop. 
--disable-translate  Allows disabling of translate from the command line to assist with automated browser testing (e.g. Selenium/WebDriver). Normal browser users should disable translate with the preference. 
--disable-translate-new-ux[4]  Disables Translate experimental new UX which replaces the infobar. 
--disable-unified-media-pipeline[6]  Use WebMediaPlayerAndroid instead of WebMediaPlayerImpl. This is a temporary switch for holding back the new unified media pipeline. 
--disable-usb-keyboard-detect[1]  Disables the USB keyboard detection for blocking the OSK on Win8+. 
--disable-v8-idle-tasks  Disable V8 idle tasks. 
--disable-vaapi-accelerated-video-encode[5] Disables VA-API accelerated video encode. 
--disable-views-rect-based-targeting  Specifies if a heuristic should be used to determine the most probable target of a gesture, where the touch region is represented by a rectangle. 
--disable-virtual-keyboard-overscroll  No description 
--disable-voice-input  No description 
--disable-volume-adjust-sound  Disables volume adjust sound. 
--disable-vr-shell[6]  Disable VR UI if supported. 
--disable-wake-on-wifi  Disables wake on wifi features. 
--disable-web-notification-custom-layouts  Disables Web Notification custom layouts. 
--disable-web-security  Don't enforce the same-origin policy. (Used by people testing their sites.) 
--disable-webgl  Disable experimental WebGL support. 
--disable-webgl-image-chromium  Disables WebGL rendering into a scanout buffer for overlay support. 
--disable-webrtc-encryption[10]  Disables encryption of RTP Media for WebRTC. When Chrome embeds Content, it ignores this switch on its stable and beta channels. 
--disable-webrtc-hw-decoding[10]  Disables HW decode acceleration for WebRTC. 
--disable-webrtc-hw-encoding[10]  Disables HW encode acceleration for WebRTC. 
--disable-webusb-security  Disables WebUSB's CORS-like checks for origin->device communication. 
--disable-win32k-lockdown[1]  Disables the Win32K process mitigation policy for child processes. 
--disable-winrt-midi-api[1]  Disable Windows Runtime Midi API for WebMIDI 
--disable-xss-auditor  Disables Blink's XSSAuditor. The XSSAuditor mitigates reflective XSS. 
--disable-zero-browsers-open-for-tests  Some tests seem to require the application to close when the last browser window is closed. Thus, we need a switch to force this behavior for ChromeOS Aura, disable "zero window mode". TODO(pkotwicz): Investigate if this bug can be removed. (http://crbug.com/119175) 
--disable-zero-copy  Disable rasterizer that writes directly to GPU memory associated with tiles. 
--disable-zero-copy-dxgi-video  Disable the video decoder from drawing directly to a texture. 
--disabled  disabled: touch events are disabled. 
--disk-cache-dir  Use a specific disk cache location, rather than one derived from the UserDatadir. 
--disk-cache-size  Forces the maximum disk space to be used by the disk cache, in bytes. 
--display[11]  Which X11 display to connect to. Emulates the GTK+ "--display=" command line argument. 
--dmg-device[4]  When switches::kProcessType is switches::kRelauncherProcess, if this switch is also present, the relauncher process will unmount and eject a mounted disk image and move its disk image file to the trash. The argument's value must be a BSD device name of the form "diskN" or "diskNsM". 
--dns-log-details  No description 
--dom-automation  Specifies if the |DOMAutomationController| needs to be bound in the renderer. This binding happens on per-frame basis and hence can potentially be a performance bottleneck. One should only enable it when automating dom based tests. 
--download-whole-document  No description 
--dump-browser-histograms  Requests that a running browser process dump its collected histograms to a given file. The file is overwritten if it exists. 
--dump-dom  Instructs headless_shell to print document.body.innerHTML to stdout. 
--eafe-path  EAFE path to use for Easy bootstrapping. 
--eafe-url  EAFE URL to use for Easy bootstrapping. 
--early-tracing[12]  No description 
--easy-unlock-app-path  Overrides the path of Easy Unlock component app. 
--egl  No description 
--elevate  No description 
--embedded-extension-options  Enables extension options to be embedded in chrome://extensions rather than a new tab. 
--emphasize-titles-in-omnibox-dropdown  Causes the omnibox dropdown to emphasize the titles of URL suggestions for query-like inputs. 
--emulate-shader-precision  Emulate ESSL lowp and mediump float precisions by mutating the shaders to round intermediate values in ANGLE. 
--enable-accelerated-2d-canvas  Enable accelerated 2D canvas. 
--enable-accelerated-vpx-decode[1]  Enables experimental hardware acceleration for VP8/VP9 video decoding. Bitmask - 0x1=Microsoft, 0x2=AMD, 0x03=Try all. 
--enable-accessibility-tab-switcher[6]  Enable the accessibility tab switcher. 
--enable-account-consistency  Enables consistent identity features. 
--enable-adaptive-selection-handle-orientation[6]  Enable inverting of selection handles so that they are not clipped by the viewport boundaries. 
--enable-add-to-shelf  Enables the display of a banner allowing the user to add a web app to their shelf (or platform-specific equivalent) 
--enable-aggressive-domstorage-flushing  Enable the aggressive flushing of DOM Storage to minimize data loss. 
--enable-all-bookmarks-view  Enables all bookmarks view in bookmark manager. 
--enable-app-info-dialog-mac[4]  Enable the toolkit-views App Info dialog for Mac. This is accessible from chrome://apps and chrome://extensions and is already enabled on non-mac. 
--enable-app-list  If set, the app list will be enabled as if enabled from CWS. 
--enable-app-window-controls  Enables the <window-controls> tag in platform apps. 
--enable-app-window-cycling[4]  Enables custom Cmd+` window cycling for platform apps and hosted apps. 
--enable-appcontainer  Enable or disable appcontainer/lowbox for renderer on Win8+ platforms. 
--enable-apps-file-associations  Enable OS integration for Chrome app file associations. 
--enable-apps-show-on-first-paint  Show apps windows after the first paint. Windows will be shown significantly later for heavy apps loading resources synchronously but it will be insignificant for apps that load most of their resources asynchronously. 
--enable-arc  Enables starting the ARC instance upon session start. 
--enable-audio-debug-recordings-from-extension  If the WebRTC logging private API is active, enables audio debug recordings. 
--enable-autofill-keyboard-accessory-view[6] Enables showing suggestions in a keyboard accessory view. 
--enable-benchmarking  Enables the benchmarking extensions. 
--enable-ble-advertising-in-apps  Enable BLE Advertisiing in apps. 
--enable-bookmark-undo  Enables the multi-level undo system for bookmarks. 
--enable-browser-side-navigation  PlzNavigate: Use the experimental browser-side navigation path. 
--enable-browser-task-scheduler  No description 
--enable-canvas-2d-dynamic-rendering-mode-switching  Enables dynamic rendering pipeline switching to optimize the performance of 2d canvas 
--enable-child-account-detection  Enables detection of child accounts. 
--enable-clear-browsing-data-counters  Enables data volume counters in the Clear Browsing Data dialog. 
--enable-cloud-print-proxy  This applies only when the process type is "service". Enables the Cloud Print Proxy component within the service process. 
--enable-cloud-print-xps[1]  Fallback to XPS. By default connector uses CDD. 
--enable-color-correct-rendering  Enable color space aware rasterization and compositing. 
--enable-crash-reporter  Indicates that crash reporting should be enabled. On platforms where helper processes cannot access to files needed to make this decision, this flag is generated internally. 
--enable-crash-reporter-for-testing[13]  Used for turning on Breakpad crash reporting in a debug environment where crash reporting is typically compiled but disabled. 
--enable-credential-manager-api  Enable the experimental Credential Manager JavaScript API. 
--enable-crx-hash-check  Enable package hash check: the .crx file sha256 hash sum should be equal to the one received from update manifest. 
--enable-data-reduction-proxy-bypass-warning  Enable the data reduction proxy bypass warning. 
--enable-data-reduction-proxy-carrier-test  Enables the origin of the carrier test data reduction proxy. 
--enable-data-reduction-proxy-force-pingback  Enables sending a pageload metrics pingback after every page load. 
--enable-data-reduction-proxy-lite-page  Enables lite page from the data reduction proxy. This means a lite page should be requested instead of placeholders whenever Lo-Fi mode is on. Lo-fi must also be enabled via a flag or field trial. 
--enable-datasaver-prompt  Enables Data Saver prompt on cellular networks. 
--enable-default-media-session[14]  Use a media session for each tabs in a way that two tabs can't play on top of each other. This is different from the Media Session API as it is enabling a default behaviour for the browser. The allowed values are: "" (empty), |kEnableDefaultMediaSessionWithFlash|. 
--enable-device-discovery-notifications  Enable device discovery notifications. 
--enable-devtools-experiments  If true devtools experimental settings are enabled. 
--enable-display-list-2d-canvas  Enables display list based 2d canvas implementation. Options: 1. Enable: allow browser to use display list for 2d canvas (browser makes decision). 2. Force: browser always uses display list for 2d canvas. 
--enable-distance-field-text  Enables using signed distance fields when rendering text. Only valid if GPU rasterization is enabled as well.
--enable-distillability-service  No description 
--enable-dom-distiller  No description 
--enable-domain-reliability  Enables Domain Reliability Monitoring. 
--enable-drive-search-in-app-launcher  Enable/disable drive search in chrome launcher. 
--enable-embedded-extension-options  Hack so that feature switch can work with about_flags. See kEnableScriptsRequireAction. 
--enable-embeddedsearch-api[6]  Enables EmbeddedSearch API in the search results page. 
--enable-exclusive-audio[1]  Use exclusive mode audio streaming for Windows Vista and higher. Leads to lower latencies for audio streams which uses the AudioParameters::AUDIO_PCM_LOW_LATENCY audio path. See http://msdn.microsoft.com/en-us/library/windows/desktop/dd370844.aspx for details. 
--enable-experimental-accessibility-features Shows additional checkboxes in Settings to enable Chrome OS accessibility features that haven't launched yet. 
--enable-experimental-canvas-features  Enable experimental canvas features, e.g. canvas 2D context attributes 
--enable-experimental-extension-apis  Enables extension APIs that are in development. 
--enable-experimental-input-view-features No description 
--enable-experimental-web-platform-features  Enables Web Platform features that are in development. 
--enable-extension-action-redesign  Hack so that feature switch can work with about_flags. See kEnableScriptsRequireAction. 
--enable-extension-activity-log-testing  No description 
--enable-extension-activity-logging  Enables logging for extension activity. 
--enable-extension-assets-sharing  Enables sharing assets for installed default apps. 
--enable-fast-unload  Enable the fast unload controller, which speeds up tab/window close by running a tab's onunload js handler independently of the GUI - crbug.com/142458 . 
--enable-fast-web-scroll-view-insets  Enables a workaround for fast inset updates for UIWebView.scrollView. 
--enable-features  Lists separated by commas the name of features to disable. See base::FeatureList::InitializeFromCommandLine for details. 
--enable-files-details-panel  Enables details panel in Files app. 
--enable-files-quick-view  Enables quick view in Files app. 
--enable-first-run-ui-transitions  Enables animated transitions during first-run tutorial. 
--enable-floating-virtual-keyboard  No description 
--enable-font-antialiasing  Enable font antialiasing for pixel tests. 
--enable-fullscreen-tab-detaching[4]  Enables tab detaching in fullscreen mode on Mac. 
--enable-fullscreen-toolbar-reveal[4]  Enables the fullscreen toolbar to reveal itself for tab strip changes. 
--enable-google-branded-context-menu[15] Shows a Google icon next to context menu items powered by Google services. 
--enable-gpu-async-worker-context  Makes the GL worker context run asynchronously by using a separate stream. 
--enable-gpu-benchmarking  Enables the GPU benchmarking extension 
--enable-gpu-client-logging  Enable GPU client logging. 
--enable-gpu-client-tracing  Enables TRACE for GL calls in the renderer. 
--enable-gpu-command-logging  Turn on Logging GPU commands. 
--enable-gpu-debugging  Turn on Calling GL Error after every command. 
--enable-gpu-memory-buffer-compositor-resources  Specify that all compositor resources should be backed by GPU memory buffers. 
--enable-gpu-memory-buffer-video-frames Enable GpuMemoryBuffer backed VideoFrames. 
--enable-gpu-rasterization  Allow heuristics to determine when a layer tile should be drawn with the Skia GPU backend. Only valid with GPU accelerated compositing + impl-side painting. 
--enable-gpu-service-logging  Turns on GPU logging (debug build only). 
--enable-gpu-service-tracing  Turns on calling TRACE for every GL call. 
--enable-grouped-history  Enables grouping websites by domain and filtering them by period. 
--enable-hardware-overlays  Enable compositing individual elements via hardware overlays when permitted by device. Setting the flag to "single-fullscreen" will try to promote a single fullscreen overlay and use it as main framebuffer where possible. 
--enable-harfbuzz-rendertext[4]  Enables the HarfBuzz port of RenderText on Mac (it's already used only for text editing; this enables it for everything else). 
--enable-heap-profiling  Makes memory allocators keep track of their allocations and context, so a detailed breakdown of memory usage can be presented in chrome://tracing when the memory-infra category is enabled. 
--enable-hosted-app-quit-notification[4]  Shows a notification when quitting Chrome with hosted apps running. Default behavior is to also quit all hosted apps. 
--enable-hosted-apps-in-windows[4]  Allows hosted apps to be opened in windows on Mac. 
--enable-hosted-mode[6]  Enables chrome hosted mode for Android. 
--enable-hotword-hardware  Enables experimental hotword features specific to always-on. 
--enable-hung-renderer-infobar[6]  Enables a hung renderer InfoBar allowing the user to close or wait on unresponsive web content. 
--enable-icon-ntp  Enables large icons on the New Tab page. 
--enable-inband-text-tracks  Enables support for inband text tracks in media content. 
--enable-ios-handoff-to-other-devices  Enables support for Handoff from Chrome on iOS to the default browser of other Apple devices. 
--enable-ios-password-generation  Enable password generation for iOS. 
--enable-ios-physical-web  Enables Physical Web scanning for nearby URLs. 
--enable-kiosk-mode  Enables Kiosk mode for Chrome OS. Note this switch refers to retail mode rather than the kiosk app mode.
--enable-layer-lists  Switches cc machinery to use layer lists instead of layer trees 
--enable-lcd-text  Enables LCD text. 
--enable-leak-detection  Enables the leak detection of loading webpages. This allows us to check whether or not reloading a webpage releases web-related objects correctly. 
--enable-local-file-accesses  Enable file accesses. It should not be enabled for most Cast devices. 
--enable-logging  Force logging to be enabled. Logging is disabled by default in release builds. 
--enable-longpress-drag-selection[6]  Enable drag manipulation of longpress-triggered text selections. 
--enable-low-end-device-mode  Force low-end device mode when set. 
--enable-low-res-tiling  When using CPU rasterizing generate low resolution tiling. Low res tiles may be displayed during fast scrolls especially on slower devices. 
--enable-lru-snapshot-cache  Enables the snapshot lru cache. 
--enable-mac-views-native-app-windows[4] Enables use of toolkit-views based native app windows. 
--enable-main-frame-before-activation  Enables sending the next BeginMainFrame before the previous commit activates. 
--enable-md-feedback  Enables the Material Design feedback form. 
--enable-md-policy-page  Enables the Material Design policy page at chrome://md-policy. 
--enable-md-storage-manager  Enables storage manager in MD Settings. 
--enable-media-suspend  Suspend media pipeline on background tabs. 
--enable-memory-benchmarking  Enables the memory benchmarking extension 
--enable-merge-key-char-events[1]  Enables merging the key event (WM_KEY*) with the char event (WM_CHAR). 
--enable-message-center-always-scroll-up-upon-notification-removal  Enables message center to always move other notifications upwards when a notification is removed, no matter whether the message center is displayed top down or not. 
--enable-nacl  Runs the Native Client inside the renderer process and enables GPU plugin (internally adds lEnableGpuPlugin to the command line). 
--enable-nacl-debug  Enables debugging via RSP over a socket. 
--enable-nacl-nonsfi-mode  Enables Non-SFI mode, in which programs can be run without NaCl's SFI sandbox. 
--enable-native-cups[5]  Enables native cups integration 
--enable-native-gpu-memory-buffers  Enable native GPU memory buffer support when available. 
--enable-natural-scroll-default  Enables natural scroll by default. 
--enable-navigation-tracing  Enables tracing for each navigation. It will attempt to trace each navigation for 10s, until the buffer is full, or until the next navigation. It only works if a URL was provided by --trace-upload-url. 
--enable-net-benchmarking  Enables the network-related benchmarking extensions. 
--enable-network-information  Enables the network information API. 
--enable-network-portal-notification  Enables notifications about captive portals in session. 
--enable-new-bookmark-apps  Enables the new bookmark app system. 
--enable-ntp-search-engine-country-detection  Enables using the default search engine country to show country specific popular sites on the NTP. 
--enable-offer-store-unmasked-wallet-cards Force showing the local save checkbox in the autofill dialog box for getting the full credit card number for a wallet card. 
--enable-offer-upload-credit-cards  Enables offering to upload credit cards. 
--enable-offline-auto-reload  Enable auto-reload of error pages if offline. 
--enable-offline-auto-reload-visible-only  Only auto-reload error pages when the tab is visible. 
--enable-osk-overscroll[6]  Enables overscrolling for the OSK on Android. 
--enable-overlay-scrollbar  Enables overlay scrollbars on Aura or Linux. Does nothing on Mac. 
--enable-override-bookmarks-ui  Enables extensions to hide bookmarks UI elements. 
--enable-partial-raster  Enable partial raster in the renderer. 
--enable-password-generation  Enables password generation when we detect that the user is going through account creation. 
--enable-payment-request  Enable the Payment Request API. 
--enable-pepper-testing  Enables the testing interface for PPAPI. 
--enable-per-monitor-dpi[1]  Enables per monitor DPI for supported Windows versions. 
--enable-permission-action-reporting  Enables permission action reporting to Safe Browsing servers for opted in users. 
--enable-permissions-blacklist  Enables the Permissions Blacklist, which blocks access to permissions for blacklisted sites. 
--enable-physical-keyboard-autocorrect  Enables suggestions while typing on a physical keyboard. 
--enable-pinch  Enables compositor-accelerated touch-screen pinch gestures. 
--enable-pixel-output-in-tests  Forces tests to produce pixel output when they normally wouldn't. 
--enable-plugin-placeholder-testing  Enables testing features of the Plugin Placeholder. For internal use only. 
--enable-potentially-annoying-security-features  Enables a number of potentially annoying security features (strict mixed content mode, powerful feature restrictions, etc.) 
--enable-power-overlay  Enables the Power overlay in Settings. 
--enable-precache  Enables the proactive populating of the disk cache with Web resources that are likely to be needed in future page fetches. 
--enable-precise-memory-info  Make the values returned to window.performance.memory more granular and more up to date in shared worker. Without this flag, the memory information is still available, but it is bucketized and updated less frequently. This flag also applys to workers. 
--enable-prefer-compositing-to-lcd-text  Enable the creation of compositing layers when it would prevent LCD text. 
--enable-print-preview-register-promos  Enables showing unregistered printers in print preview 
--enable-profile-shortcut-manager[1]  Force-enables the profile shortcut manager. This is needed for tests since they use a custom-user-data-dir which disables this. 
--enable-profiling  Enables tracking of tasks in profiler for viewing via about:profiler. To predominantly disable tracking (profiling), use the command line switch: --enable-profiling=0 Some tracking will still take place at startup, but it will be turned off during chrome_browser_main. 
--enable-proximity-auth-bluetooth-low-energy-discovery  Enables discovery of the phone over Bluetooth Low Energy. 
--enable-proximity-auth-proximity-detection Enables close proximity detection. This allows the user to set a setting to require very close proximity between the remote device and the local device in order to unlock the local device, which trades off convenience for security. 
--enable-push-api-background-mode  Enable background mode for the Push API. 
--enable-qr-scanner  Enables the QR Code scanner. 
--enable-quic  Enables the QUIC protocol. This is a temporary testing flag. 
--enable-quic-port-selection  Enable use of Chromium's port selection for the ephemeral port via bind(). This only has an effect if the QUIC protocol is enabled. 
--enable-reader-mode-toolbar-icon  Enables context-sensitive reader mode button in the toolbar. 
--enable-request-tablet-site  Enables request of tablet site (via user agent override). 
--enable-rgba-4444-textures  Enables RGBA_4444 textures. 
--enable-sandbox  Enables the sandbox on this process. 
--enable-sandbox-logging  Cause the OS X sandbox write to syslog every time an access to a resource is denied by the sandbox. 
--enable-screenshot-testing-with-mode  Enables using screenshots in tests and seets mode. 
--enable-scripts-require-action  FeatureSwitch and about_flags don't play nice. Feature switch expects either --enable-<feature> or --<feature>=1, but about_flags expects the command line argument to enable it (or a selection). Hack this in, so enabling it in about_flags enables the feature. Appending this flag has the same effect as --scripts-require-action=1. 
--enable-scroll-prediction  Enable scroll prediction for scroll update events. 
--enable-settings-window  Enable settings in a separate browser window per profile (see SettingsWindowEnabled() below). 
--enable-sgi-video-sync  Enable use of the SGI_video_sync extension, which can have driver/sandbox/window manager compatibility issues. 
--enable-single-click-autofill  Enables/disables suggestions without typing anything (on first click). 
--enable-site-engagement-app-banner  Enable the Site Engagement App Banner which triggers app install banners using the site engagement service rather than a navigation-based heuristic. Implicitly enables the site engagement service. 
--enable-site-engagement-eviction-policy  Enable the Site Engagement Eviction Policy which evicts temporary storage using the site engagement service. Implicitly enables the site engagement service. 
--enable-site-engagement-service  Enable the Site Engagement service, which records interaction with sites and allocates certain resources accordingly. 
--enable-site-settings  Enables the site settings all sites list and site details pages in the Chrome settings UI. 
--enable-skia-benchmarking  Enables the Skia benchmarking extension 
--enable-slimming-paint-v2  Enables slimming paint phase 2: http://www.chromium.org/blink/slimming-paint 
--enable-smooth-scrolling  On platforms that support it, enables smooth scroll animation. 
--enable-spatial-navigation  Enable spatial navigation 
--enable-spdy-proxy-auth  Enable the data reduction proxy. 
--enable-speech-dispatcher[16]  Allows sending text-to-speech requests to speech-dispatcher, a common Linux speech service. Because it's buggy, the user must explicitly enable it so that visiting a random webpage can't cause instability. 
--enable-spelling-feedback-field-trial[17]  Enables participation in the field trial for user feedback to spelling service. 
--enable-spotlight-actions  Enables the Spotlight actions. 
--enable-stats-collection-bindings  Specifies if the |StatsCollectionController| needs to be bound in html pages. This binding happens on per-frame basis and hence can potentially be a performance bottleneck. One should only enable it when running a test that needs to access the provided statistics. 
--enable-stats-table  Enables StatsTable, logging statistics to a global named shared memory table. 
--enable-strict-mixed-content-checking  Blocks all insecure requests from secure contexts, and prevents the user from overriding that decision. 
--enable-strict-powerful-feature-restrictions Blocks insecure usage of a number of powerful features (device orientation, for example) that we haven't yet deprecated for the web at large. 
--enable-suggestions-with-substring-match Enables suggestions with substring matching instead of prefix matching. 
--enable-supervised-user-managed-bookmarks-folder  Enables the supervised user managed bookmarks folder. 
--enable-swap-buffers-with-damage  Use EGL_KHR_swap_buffers_with_damage to implement PostSubBuffers 
--enable-sync-app-list  Enable/disable syncing of the app list independent of extensions. 
--enable-sync-articles  No description 
--enable-tab-audio-muting  Enables user control over muting tab audio from the tab strip. 
--enable-tab-switcher  Enables the tab switcher. 
--enable-tcp-fastopen  Enable use of experimental TCP sockets API for sending data in the SYN packet. 
--enable-threaded-compositing  Enabled threaded compositing for layout tests. 
--enable-threaded-texture-mailboxes  Simulates shared textures when share groups are not available. Not available everywhere. 
--enable-thumbnail-retargeting  Enables fanciful thumbnail processing. Used with NTP for instant-extended-api, where thumbnails are generally smaller. 
--enable-tile-compression  Compress tile textures for GPUs supporting it. 
--enable-touch-drag-drop  Enables touch event based drag and drop. 
--enable-touchpad-three-finger-click  Enables touchpad three-finger-click as middle button. 
--enable-touchview  Enables the observation of accelerometer events to enter touch-view mode. 
--enable-trace-app-source  Pass launch source to platform apps. 
--enable-tracing  Enable tracing during the execution of browser tests. 
--enable-tracing-output  The filename to write the output of the test tracing to. 
--enable-translate-new-ux[4]  Enables Translate experimental new UX which replaces the infobar. 
--enable-unsafe-es3-apis  Enable OpenGL ES 3 APIs without proper service side validation. 
--enable-use-zoom-for-dsf  Enable the mode that uses zooming to implment device scale factor behavior. 
--enable-user-controlled-alternate-protocol-ports  Enables Alternate-Protocol when the port is user controlled (> 1024). 
--enable-user-metrics[4]  Enable user metrics from within the installer. 
--enable-usermedia-screen-capturing  Enable screen capturing support for MediaStream API. 
--enable-video-player-chromecast-support  Enables the chromecast support for video player app. 
--enable-viewport  Enables the use of the @viewport CSS rule, which allows pages to control aspects of their own layout. This also turns on touch-screen pinch gestures. 
--enable-virtual-keyboard  No description 
--enable-vp9-in-mp4  Enables demuxing of vp9 in mp4. Note that this flag will not have any effect if MP4 demuxing is not enabled in the build. 
--enable-vr-shell[6]  Enable VR UI if supported. 
--enable-vtune-support  Enable the Vtune profiler support. 
--enable-vulkan  Enable Vulkan support, must also have ENABLE_VULKAN defined. 
--enable-wayland-server[18]  Enables Wayland display server support. 
--enable-web-app-frame  Enables a new "web app" style frame for hosted apps (including bookmark apps). 
--enable-web-bluetooth  Enable Web Bluetooth. 
--enable-web-notification-custom-layouts  Enables Web Notification custom layouts. 
--enable-webapk[6]  Enables "Add to Home screen" in the app menu to generate WebAPKs. 
--enable-webfonts-intervention-trigger  Enable WebFonts intervention and trigger the signal always. 
--enable-webfonts-intervention-v2  WebFonts intervention v2 flag and values. 
--enable-webgl-draft-extensions  Enables WebGL extensions not yet approved by the community. 
--enable-webgl-image-chromium  Enables WebGL rendering into a scanout buffer for overlay support. 
--enable-webrtc-event-logging-from-extension  If the WebRTC logging private API is active, enables WebRTC event logging. 
--enable-webrtc-hw-h264-encoding[10]  Enables H264 HW encode acceleration for WebRTC. 
--enable-webrtc-stun-origin[10]  Enables Origin header in Stun messages for WebRTC. 
--enable-webvr  Enables interaction with virtual reality devices. 
--enable-wifi-credential-sync  Enables synchronizing WiFi credentials across devices, using Chrome Sync. 
--enable-win7-webrtc-hw-h264-decoding[1] Enables H264 HW decode acceleration for WebRtc on Win 7. 
--enable-zero-copy  Enable rasterizer that writes directly to GPU memory associated with tiles. 
--enabled  enabled: touch events always enabled. 
--enabled-2g  No description 
--enabled-3g  No description 
--enabled-slow2g  No description 
--encode-binary  Encode binary layout test results (images, audio) using base64. 
--enforce  No description 
--enforce-gl-minimums  Enforce GL minimums. 
--enforce-webrtc-ip-permission-check[10]  Enforce IP Permission check. TODO(guoweis): Remove this once the feature is not under finch and becomes the default. 
--enforce_strict  No description 
--engine-cert-path  No description 
--engine-ip  Specifies the engine's IP address. Must be used in conjunction with --engine-port and --engine-transport. This is the same command line flag as ENGINE_IP in android/java/src/org/chromium/blimp/core/BlimpClientSwitches.java 
--engine-port  No description 
--engine-transport  No description 
--enterprise-disable-arc  Disables ARC for managed accounts. 
--enterprise-enable-forced-re-enrollment  Whether to enable forced enterprise re-enrollment. 
--enterprise-enable-zero-touch-enrollment Enables the zero-touch enterprise enrollment flow. 
--enterprise-enrollment-initial-modulus  Power of the power-of-2 initial modulus that will be used by the auto-enrollment client. E.g. "4" means the modulus will be 2^4 = 16. 
--enterprise-enrollment-modulus-limit  Power of the power-of-2 maximum modulus that will be used by the auto-enrollment client. 
--error-console  Allows the ErrorConsole to collect runtime and manifest errors, and display them in the chrome:extensions page. 
--experimental  No description 
--explicitly-allowed-ports  Explicitly allows additional ports using a comma-separated list of port numbers. 
--expose-internals-for-testing  Exposes the window.internals object to JavaScript for interactive development and debugging of layout tests that rely on it. 
--extension-action-redesign  Whether to switch to extension action redesign mode (experimental). 
--extension-content-verification  Name of the command line flag to force content verification to be on in one of various modes. 
--extension-process  Marks a renderer as extension process. 
--extensions-install-verification  Turns on extension install verification if it would not otherwise have been turned on. 
--extensions-multi-account  Enables multiple account versions of chrome.identity APIs. 
--extensions-not-webstore  Specifies a comma-separated list of extension ids that should be forced to be treated as not from the webstore when doing install verification. 
--extensions-on-chrome-urls  Enables extensions running scripts on chrome:// URLs. Extensions still need to explicitly request access to chrome:// URLs in the manifest. 
--extensions-update-frequency  Frequency in seconds for Extensions auto-update. 
--extra-search-query-params  Additional query params to insert in the search and instant URLs. Useful for testing. 
--fake-variations-channel  Fakes the channel of the browser for purposes of Variations filtering. This is to be used for testing only. Possible values are "stable", "beta", "dev" and "canary". Note that this only applies if the browser's reported channel is UNKNOWN. 
--false  Value indicating whether flag from command line switch is false. 
--fast  Defines that Material Design visual feedback animations should be fast. 
--fast-start  If this flag is present then this command line is being delegated to an already running chrome process via the fast path, ie: before chrome.dll is loaded. It is useful to tell the difference for tracking purposes. 
--feedback-server  Alternative feedback server to use when submitting user feedback 
--field-trial-handle  Handle to the shared memory segment containing field trial state that is to be shared between processes. The argument to this switch is the handle id (pointer on Windows) as a string, followed by a comma, then the size of the shared memory segment as a string. 
--first-exec-after-boot  Passed to Chrome the first time that it's run after the system boots. Not passed on restart after sign out. 
--flag-switches-begin  These two flags are added around the switches about:flags adds to the command line. This is useful to see which switches were added by about:flags on about:version. They don't have any effect. 
--flag-switches-end  No description 
--font-cache-shared-handle[1]  DirectWrite FontCache is shared by browser to renderers using shared memory. This switch allows us to pass the shared memory handle to the renderer. 
--force-app-mode  Forces application mode. This hides certain system UI elements and forces the app to be installed if it hasn't been already. 
--force-dev-mode-highlighting  Whether to force developer mode extensions highlighting. 
--force-device-scale-factor  Overrides the device scale factor for the browser UI and the contents. 
--force-display-list-2d-canvas  No description 
--force-fieldtrial-params  This option can be used to force parameters of field trials when testing changes locally. The argument is a param list of (key, value) pairs prefixed by an associated (trial, group) pair. You specify the param list for multiple (trial, group) pairs with a comma separator. Example: "Trial1.Group1:k1/v1/k2/v2,Trial2.Group2:k3/v3/k4/v4" Trial names, groups names, parameter names, and value should all be URL escaped for all non-alphanumeric characters. 
--force-fieldtrials  This option can be used to force field trials when testing changes locally. The argument is a list of name and value pairs, separated by slashes. If a trial name is prefixed with an asterisk, that trial will start activated. For example, the following argument defines two trials, with the second one activated: "GoogleNow/Enable/*MaterialDesignNTP/Default/" This option can also be used by the browser process to send the list of trials to a non-browser process, using the same format. See FieldTrialList::CreateTrialsFromString() in field_trial.h for details. 
--force-first-run  Displays the First Run experience when the browser is started, regardless of whether or not it's actually the First Run (this overrides kNoFirstRun). 
--force-first-run-ui  Forces first-run UI to be shown for every login. 
--force-gpu-mem-available-mb  Sets the total amount of memory that may be allocated for GPU resources 
--force-gpu-rasterization  Always use the Skia GPU backend for drawing layer tiles. Only valid with GPU accelerated compositing + impl-side painting. Overrides the kEnableGpuRasterization flag. 
--force-happiness-tracking-system  Force enables the Happiness Tracking System for the device. This ignores user profile check and time limits and shows the notification every time for any type of user. Should be used only for testing. 
--force-load-easy-unlock-app-in-tests  Force easy unlock app loading in test. TODO(xiyuan): Remove this when app could be bundled with Chrome. 
--force-local-ntp  Forces Chrome to use localNTP instead of server (GWS) NTP. 
--force-login-manager-in-tests  Usually in browser tests the usual login manager bringup is skipped so that tests can change how it's brought up. This flag disables that. 
--force-mediafoundation[1]  Force the use of MediaFoundation for video capture. This is only supported in Windows 7 and above. Used, like |kForceDirectShowVideoCapture|, to troubleshoot problems in Windows platforms. 
--force-overlay-fullscreen-video  Forces use of hardware overlay for fullscreen video playback. Useful for testing the Android overlay fullscreen functionality on other platforms. 
--force-pnacl-subzero  Force use of the Subzero as the PNaCl translator instead of LLC. 
--force-renderer-accessibility  Force renderer accessibility to be on instead of enabling it on demand when a screen reader is detected. The disable-renderer-accessibility switch overrides this if present. 
--force-show-update-menu-badge[6]  Forces the update menu badge to show. 
--force-show-update-menu-item[6]  Forces the update menu item to show. 
--force-ui-direction  Force the UI to a specific direction. Valid values are "ltr" (left-to-right) and "rtl" (right-to-left). 
--force-variation-ids  Forces additional Chrome Variation Ids that will be sent in X-Client-Data header, specified as a 64-bit encoded list of numeric experiment ids. Ids prefixed with the character "t" will be treated as Trigger Variation Ids. 
--force-video-overlays  Force media player using SurfaceView instead of SurfaceTexture on Android. 
--force-wave-audio[1]  Use Windows WaveOut/In audio API even if Core Audio is supported. 
--force-webrtc-ip-handling-policy[10]  Override WebRTC IP handling policy to mimic the behavior when WebRTC IP handling policy is specified in Preferences. 
--full-memory-crash-report  Generates full memory crash dump. 
--gaia-url  No description 
--gcm-checkin-url  Sets the checkin service endpoint that will be used for performing Google Cloud Messaging checkins. 
--gcm-mcs-endpoint  Sets the Mobile Connection Server endpoint that will be used for Google Cloud Messaging. 
--gcm-registration-url  Sets the registration endpoint that will be used for creating new Google Cloud Messaging registrations. 
--generate-accessibility-test-expectations  For development / testing only. When running content_browsertests, saves output of failing accessibility tests to their expectations files in content/test/data/accessibility/, overwriting existing file content. 
--gl  No description 
--gl-composited-texture-quad-border  Renders a green border around GL composited texture quads to help debug and study overlay support. 
--gl-shader-interm-output  Include ANGLE's intermediate representation (AST) output in shader compilation info logs. 
--gles  No description 
--golden-screenshots-dir  Screenshot testing: specifies the directory where the golden screenshots are stored. 
--google-apis-url  No description 
--google-base-url  Specifies an alternate URL to use for speaking to Google. Useful for testing. 
--google-doodle-url  Overrides the URL used to fetch the current Google Doodle. 
--google-profile-info  Enables using GAIA information to populate profile name and icon. 
--google-url  No description 
--gpu-active-device-id  Passes active gpu device id from browser process to GPU process. 
--gpu-active-vendor-id  Passes active gpu vendor id from browser process to GPU process. 
--gpu-device-id  Passes gpu device_id from browser process to GPU process. 
--gpu-driver-bug-workarounds  Pass a set of GpuDriverBugWorkaroundType ids, seperated by ','. 
--gpu-driver-date  Passes gpu driver_date from browser process to GPU process. 
--gpu-driver-vendor  Passes gpu driver_vendor from browser process to GPU process. 
--gpu-driver-version  Passes gpu driver_version from browser process to GPU process. 
--gpu-launcher  Extra command line options for launching the GPU process (normally used for debugging). Use like renderer-cmd-prefix. 
--gpu-no-complete-info-collection  Testing switch to not launch the gpu process for full gpu info collection. 
--gpu-no-context-lost  Inform Chrome that a GPU context will not be lost in power saving mode, screen saving mode, etc. Note that this flag does not ensure that a GPU context will never be lost in any situations, say, a GPU reset. 
--gpu-process  Makes this process a GPU sub-process. 
--gpu-program-cache-size-kb  Sets the maximum size of the in-memory gpu program cache, in kb 
--gpu-rasterization-msaa-sample-count  The number of multisample antialiasing samples for GPU rasterization. Requires MSAA support on GPU to have an effect. 0 disables MSAA. 
--gpu-sandbox-allow-sysv-shm  Allows shmat() system call in the GPU sandbox. 
--gpu-sandbox-failures-fatal  Makes GPU sandbox failures fatal. 
--gpu-sandbox-start-early  Starts the GPU sandbox before creating a GL context. 
--gpu-secondary-device-ids  Passes secondary gpu device ids from browser process to GPU process. 
--gpu-secondary-vendor-ids  Passes secondary gpu vendor ids from browser process to GPU process. 
--gpu-startup-dialog  Causes the GPU process to display a dialog on launch. 
--gpu-testing-device-id  Override gpu device id from the GpuInfoCollector. 
--gpu-testing-driver-date  Override gpu driver date from the GpuInfoCollector. 
--gpu-testing-gl-renderer  Override gl renderer from the GpuInfoCollector. 
--gpu-testing-gl-vendor  Override gl vendor from the GpuInfoCollector. 
--gpu-testing-gl-version  Override gl version from the GpuInfoCollector. 
--gpu-testing-os-version  Override os version from GpuControlList::MakeDecision. 
--gpu-testing-secondary-device-ids  Override secondary gpu device ids from the GpuInfoCollector. 
--gpu-testing-secondary-vendor-ids  Override secondary gpu vendor ids from the GpuInfoCollector. 
--gpu-testing-vendor-id  Override gpu vendor id from the GpuInfoCollector. 
--gpu-vendor-id  Passes gpu vendor_id from browser process to GPU process. 
--guest-wallpaper-large  Large wallpaper to use in guest mode (as path to trusted, non-user-writable JPEG file). 
--guest-wallpaper-small  Small wallpaper to use in guest mode (as path to trusted, non-user-writable JPEG file). 
--h[7]  No description 
--h264[10]  No description 
--has-chromeos-diamond-key  If true, the Chromebook has a keyboard with a diamond key. 
--help  No description 
--hide  "Hide" value for kCrosRegionsMode (VPD values are hidden). 
--hide-icons[1]  Makes Windows happy by allowing it to show "Enable access to this program" checkbox in Add/Remove Programs->Set Program Access and Defaults. This only shows an error box because the only way to hide Chrome is by uninstalling it. 
--hide-scrollbars  Hide scrollbars from screenshots. 
--history-entry-requires-user-gesture  Don't allow content to arbitrarily append to the back/forward list. The page must prcoess a user gesture before an entry can be added. 
--homedir  Defines user homedir. This defaults to primary user homedir. 
--homepage  Specifies which page will be displayed in newly-opened tabs. We need this for testing purposes so that the UI tests don't depend on what comes up for http://google.com. 
--host  No description 
--host-pairing-oobe  With this switch, start remora OOBE with the pairing screen. 
--host-resolver-retry-attempts  The maximum number of retry attempts to resolve the host. Set this to zero to disable host resolver retry attempts. 
--host-resolver-rules  These mappings only apply to the host resolver. 
--host-rules  Comma-separated list of rules that control how hostnames are mapped. For example: "MAP * 127.0.0.1" --> Forces all hostnames to be mapped to 127.0.0.1 "MAP *.google.com proxy" --> Forces all google.com subdomains to be resolved to "proxy". "MAP test.com [::1]:77 --> Forces "test.com" to resolve to IPv6 loopback. Will also force the port of the resulting socket address to be 77. "MAP * baz, EXCLUDE www.google.com" --> Remaps everything to "baz", except for "www.google.com". These mappings apply to the endpoint host in a net::URLRequest (the TCP connect and host resolver in a direct connection, and the CONNECT in an http proxy connection, and the endpoint host in a SOCKS proxy connection). 
--ignore-autocomplete-off-autofill  Ignores autocomplete="off" for Autofill data (profiles + credit cards). 
--ignore-certificate-errors  Ignores certificate-related errors. 
--ignore-gpu-blacklist  Ignores GPU blacklist. 
--ignore-urlfetcher-cert-requests  Causes net::URLFetchers to ignore requests for SSL client certificates, causing them to attempt an unauthenticated SSL/TLS session. This is intended for use when testing various service URLs (eg: kPromoServerURL, kSbURLPrefix, kSyncServiceURL, etc). 
--ignore-user-profile-mapping-for-tests  If true, profile selection in UserManager will always return active user's profile. TODO(nkostlyev): http://crbug.com/364604 - Get rid of this switch after we turn on multi-profile feature on ChromeOS. 
--in-process-gpu  Run the GPU process as a thread in the browser process. 
--incognito  Causes the browser to launch directly in incognito mode. 
--inert-visual-viewport  Makes all APIs reflect the layout viewport. 
--input  No description 
--install-chrome-app  Causes Chrome to initiate an installation flow for the given app. 
--install-supervised-user-whitelists  A list of whitelists to install for a supervised user, for testing. The list is of the following form: <id>[:<name>],[<id>[:<name>],...] 
--instant-process  Marks a renderer as an Instant process. 
--interests-url  The URL for the interests API. 
--invalidation-use-gcm-channel  Invalidation service should use GCM network channel even if experiment is not enabled. 
--ipc-connection-timeout  Overrides the timeout, in seconds, that a child process waits for a connection from the browser before killing itself. 
--ipc-dump-directory[19]  Dumps IPC messages sent from renderer processes to the browser process to the given directory. Used primarily to gather samples for IPC fuzzing. 
--ipc-fuzzer-testcase[19]  Specifies the testcase used by the IPC fuzzer. 
--is-running-in-mash  Chrome is running in Mash. 
--isolate-extensions  Enables site isolation for all chrome-extension:// urls. 
--isolate-sites-for-testing  Enable site isolation (--site-per-process style isolation) for a subset of sites. The argument is a wildcard pattern which will be matched against the site URL to determine which sites to isolate. This can be used to isolate just one top-level domain, or just one scheme. Example usages: --isolate-sites-for-testing=*.com --isolate-sites-for-testing=https://* 
--javascript-harmony  Enables experimental Harmony (ECMAScript 6) features. 
--js-flags  Specifies the flags passed to JS engine 
--keep-alive-for-test  Used for testing - keeps browser alive after last browser window closes. 
--kiosk  Enable Kiosk mode. 
--kiosk-printing  Print automatically in kiosk mode. |kKioskMode| must be set as well. See http://crbug.com/31395. 
--lang  The language file that we want to try to open. Of the form language[-country] where language is the 2 letter code from ISO-639. 
--last-launched-app  Pass the app id information to the renderer process, to be used for logging. last-launched-app should be the app that just launched and is spawning the renderer. 
--learning  Speculative resource prefetching will only learn about resources that need to be prefetched but will not prefetch them. 
--load-and-launch-app  Loads an app from the specified directory and launches it. 
--load-apps  Path to a comma-separated list of apps to load at startup. The first app in the list will be launched. 
--load-component-extension  Comma-separated list of directories with component extensions to load. 
--load-extension  Loads an extension from the specified directory. 
--local-heuristics-only-for-password-generation  Removes the requirement that we recieved a ping from the autofill servers and that the user doesn't have the given form blacklisted. Used in testing. 
--local-ntp-reload[20]  Enables a live-reload for local NTP resources. This only works when Chrome is running from a Chrome source directory. 
--log-gpu-control-list-decisions  Logs GPU control list decisions when enforcing blacklist rules. 
--log-level  Sets the minimum log level. Valid values are from 0 to 3: INFO = 0, WARNING = 1, LOG_ERROR = 2, LOG_FATAL = 3. 
--log-net-log  Enables saving net log events to a file and sets the file name to use. 
--login-manager  Enables Chrome-as-a-login-manager behavior. 
--login-profile  Specifies the profile to use once a chromeos user is logged in. This parameter is ignored if user goes through login screen since user_id hash defines which profile directory to use. In case of browser restart within active session this parameter is used to pass user_id hash for primary user. 
--login-user  Specifies the user which is already logged in. 
--lso-url  No description 
--ltr  No description 
--main-frame-resizes-are-orientation-changes  Resizes of the main frame are caused by changing between landscape and portrait mode (i.e. Android) so the page should be rescaled to fit. 
--make-chrome-default[4]  Indicates whether Chrome should be set as the default browser during installation. 
--make-default-browser  Makes Chrome default browser 
--managed-user-id  Sets the supervised user ID for any loaded or newly created profile to the given value. Pass an empty string to mark the profile as non-supervised. Used for testing. 
--managed-user-sync-token  Used to authenticate requests to the Sync service for supervised users. Setting this switch also causes Sync to be set up for a supervised user. 
--mark-non-secure-as  Use to opt-in to marking HTTP as non-secure. 
--market-url-for-testing[6]  Sets the market URL for Chrome for use in testing. 
--material  Material design mode for the |kTopChromeMD| switch. 
--material-design-ink-drop-animation-speed Defines the speed of Material Design visual feedback animations. 
--material-hybrid  Material design hybrid mode for the |kTopChromeMD| switch. Targeted for mouse/touch hybrid devices. 
--max-gum-fps[10]  Override the maximum framerate as can be specified in calls to getUserMedia. This flag expects a value. Example: --max-gum-fps=17.5 
--max-untiled-layer-height  Sets the width and height above which a composited layer will get tiled. 
--max-untiled-layer-width  No description 
--media-cache-size  Forces the maximum disk space to be used by the media cache, in bytes. 
--media-router  Enables Media Router. 
--mem-pressure-system-reserved-kb  Some platforms typically have very little 'free' memory, but plenty is available in buffers+cached. For such platforms, configure this amount as the portion of buffers+cached memory that should be treated as unavailable. If this switch is not used, a simple pressure heuristic based purely on free memory will be used. 
--memory-metrics  Sample memory usage with high frequency and store the results to the Renderer.Memory histogram. Used in memory tests. 
--memory-pressure-off  No description 
--memory-pressure-thresholds  The memory pressure threshold selection which is used to decide whether and when a memory pressure event needs to get fired. 
--memory-pressure-thresholds-mb[1]  Sets the free memory thresholds below which the system is considered to be under moderate and critical memory pressure. Used in the browser process, and ignored if invalid. Specified as a pair of comma separated integers. See base/win/memory_pressure_monitor.cc for defaults. 
--message-center-changes-while-open  Flag to enable or disable notification changes while the message center opens. This flag will be removed once the feature gets stable. 
--metrics-client-id[4]  This is how the metrics client ID is passed from the browser process to its children. With Crashpad, the metrics client ID is distinct from the crash client ID. 
--metrics-recording-only  Enables the recording of metrics reports but disables reporting. In contrast to kDisableMetrics, this executes all the code that a normal client would use for reporting, except the report is dropped rather than sent to the server. This is useful for finding issues in the metrics code during UI and performance tests. 
--mhtml-generator-option  Sets options for MHTML generator to skip no-store resources: "skip-nostore-main" - fails to save a page if main frame is 'no-store' "skip-nostore-all" - also skips no-store subresources. 
--mock  No description 
--mojo-channel-token  The token to use to construct the message pipe on which to layer ChannelMojo. 
--mojo-local-storage  Use a Mojo-based LocalStorage implementation. 
--mojo-service-worker  Use a Mojo-based ServiceWorker implementation. 
--monitoring-destination-id  Allows setting a different destination ID for connection-monitoring GCM messages. Useful when running against a non-prod management server. 
--mse-audio-buffer-size-limit  Allows explicitly specifying MSE audio/video buffer sizes. Default values are 150M for video and 12M for audio. 
--mse-video-buffer-size-limit  No description 
--mute-audio  Mutes audio sent to the audio device so it is not audible during automated testing. 
--nacl-broker  Value for --type that causes the process to run as a NativeClient broker (used for launching NaCl loader processes on 64-bit Windows). 
--nacl-dangerous-no-sandbox-nonsfi  Disable sandbox even for non SFI mode. This is particularly unsafe as non SFI NaCl heavily relies on the seccomp sandbox. 
--nacl-debug-mask  Uses NaCl manifest URL to choose whether NaCl program will be debugged by debug stub. Switch value format: [!]pattern1,pattern2,...,patternN. Each pattern uses the same syntax as patterns in Chrome extension manifest. The only difference is that * scheme matches all schemes instead of matching only http and https. If the value doesn't start with !, a program will be debugged if manifest URL matches any pattern. If the value starts with !, a program will be debugged if manifest URL does not match any pattern.
--nacl-gdb  Native Client GDB debugger that will be launched automatically when needed. 
--nacl-gdb-script  GDB script to pass to the nacl-gdb debugger at startup. 
--nacl-loader  Value for --type that causes the process to run as a NativeClient loader for SFI mode. 
--nacl-loader-nonsfi  Value for --type that causes the process to run as a NativeClient loader for non SFI mode. 
--native  Report native (walk the stack) allocation traces. By default pseudo stacks derived from trace events are reported. 
--net-log-capture-mode  Sets the granularity of events to capture in the network log. The mode can be set to one of the following values: "Default" "IncludeCookiesAndCredentials" "IncludeSocketBytes" See the functions of the corresponding name in net_log_capture_mode.h for a description of their meaning. 
--netifs-to-ignore  List of network interfaces to ignore. Ignored interfaces will not be used for network connectivity. 
--network-country-iso[6]  The telephony region (ISO country code) to use in phone number detection. 
--neutral  No description 
--new-profile-management  Enables new profile management system, including lock mode. 
--new-window  Launches URL in new browser window. 
--NewProfileManagement  No description 
--no-default-browser-check  Disables the default browser check. Useful for UI/browser tests where we want to avoid having the default browser info-bar displayed. 
--no-experiments  Disables all experiments set on about:flags. Does not disable about:flags itself. Useful if an experiment makes chrome crash at startup: One can start chrome with --no-experiments, disable the problematic lab at about:flags and then restart chrome without this switch again. 
--no-first-run  Skip First Run tasks, whether or not it's actually the First Run. Overridden by kForceFirstRun. This does not drop the First Run sentinel and thus doesn't prevent first run from occuring the next time chrome is launched without this flag. 
--no-managed-user-acknowledgment-check Disables checking whether we received an acknowledgment when registering a supervised user. Also disables the timeout during registration that waits for the ack. Useful when debugging against a server that does not support notifications. 
--no-network-profile-warning[1]  Whether or not the browser should warn if the profile is on a network share. This flag is only relevant for Windows currently. 
--no-pings  Don't send hyperlink auditing pings 
--no-proxy-server  Don't use a proxy server, always make direct connections. Overrides any other proxy server flags that are passed. 
--no-referrers  Don't send HTTP-Referer headers. 
--no-sandbox  Disables the sandbox for debugging. 
--no-service-autorun  Disables the service process from adding itself as an autorun process. This does not delete existing autorun registrations, it just prevents the service from registering a new one. 
--no-startup-window  Does not automatically open a browser window on startup (used when launching Chrome for the purpose of hosting background apps). 
--no-wifi  Disable features that require WiFi management. 
--no-zygote  Disables the use of a zygote process for forking child processes. Instead, child processes will be forked and exec'd directly. Note that --no-sandbox should also be used together with this flag because the sandbox needs the zygote to work. 
--noerrdialogs  Suppresses all error dialogs when present. 
--non-material  Classic, non-material, mode for the |kTopChromeMD| switch. 
--non-secure  No description 
--none[10]  No description 
--note-taking-app-ids  An optional comma-separated list of IDs of apps that can be used to take notes. If unset, a hardcoded list is used instead. 
--ntp-snippets-add-incomplete  If this flag is set, we will add downloaded snippets that are missing some critical data to the list. 
--ntp-switch-to-existing-tab[6]  Switch to an existing tab for a suggestion opened from the New Tab Page. 
--null  No description 
--num-pac-threads  Specifies the maximum number of threads to use for running the Proxy Autoconfig (PAC) script. 
--num-raster-threads  Number of worker threads used to rasterize content. 
--oauth2-client-id  No description 
--oauth2-client-secret  No description 
--off  No description 
--on  No description 
--oobe-bootstrapping-master  Indicates that if we should start bootstrapping Master OOBE. 
--oobe-guest-session  Indicates that a guest session has been started before OOBE completion. 
--oobe-skip-postlogin  Skips all other OOBE pages after user login. 
--oobe-timer-interval  Interval at which we check for total time on OOBE. 
--open-ash[21]  No description 
--opengraph  No description 
--origin-to-force-quic-on  Specifies a comma separated list of host-port pairs to force use of QUIC on. 
--origin-trial-disabled-features  Contains a list of feature names for which origin trial experiments should be disabled. Names should be separated by "|" characters. 
--origin-trial-public-key  Overrides the default public key for checking origin trial tokens. 
--original-process-start-time  The time that a new chrome process which is delegating to an already running chrome process started. (See ProcessSingleton for more details.) 
--osmesa  No description 
--output  No description 
--override  "Override" value for kCrosRegionsMode (region's data is read first). 
--override-metrics-upload-url  Override the URL to which metrics logs are sent for debugging. 
--override-plugin-power-saver-for-testing  Override the behavior of plugin throttling for testing. By default the throttler is only enabled for a hard-coded list of plugins. Set the value to 'always' to always throttle every plugin instance. 
--override-use-gl-with-osmesa-for-tests  Forces the use of OSMesa instead of hardware gpu. 
--overscroll-history-navigation  Controls the behavior of history navigation in response to horizontal overscroll. Set the value to '0' to disable. Set the value to '1' to enable the behavior where pages slide in and out in response to the horizontal overscroll gesture and a screenshot of the target page is shown. Set the value to '2' to enable the simplified overscroll UI where a navigation arrow slides in from the side of the screen in response to the horizontal overscroll gesture. Defaults to '1'. 
--ozone-dump-file  Specify location for image dumps. 
--ozone-initial-display-bounds  Specifies the size of the primary display at initialization. 
--ozone-initial-display-physical-size-mm  Specifies the physical display size in millimeters. 
--ozone-platform  Specify ozone platform implementation to use. 
--pack-extension  Packages an extension to a .crx installable file from a given directory. 
--pack-extension-key  Optional PEM private key to use in signing packaged .crx. 
--parent-profile  Specifies the path to the user data folder for the parent profile. 
--parent-window  No description 
--passive-listeners-default  Override the default value for the 'passive' field in javascript addEventListener calls. Values are defined as: 'documentonlytrue' to set the default be true only for document level nodes. 'true' to set the default to be true on all nodes (when not specified). 'forcealltrue' to force the value on all nodes. 
--password-store[7]  Specifies which password store to use (detect, default, gnome-keyring, gnome-libsecret, kwallet). 
--permission-request-api-scope  Development flag for permission request API. This flag is needed until the API is finalized. TODO(bauerb): Remove when this flag is not needed anymore. 
--permission-request-api-url  Development flag for permission request API. This flag is needed until the API is finalized. TODO(bauerb): Remove when this flag is not needed anymore. 
--power-stub  Specifies power stub behavior: 'cycle=2' - Cycles power states every 2 seconds. See FakeDBusThreadManager::ParsePowerCommandLineSwitch for full details. 
--ppapi  Argument to the process type that indicates a PPAPI plugin process type. 
--ppapi-antialiased-text-enabled[1]  The boolean value (0/1) of FontRenderParams::antialiasing to be passed to Ppapi processes. 
--ppapi-broker  Argument to the process type that indicates a PPAPI broker process type. 
--ppapi-flash-args  "Command-line" arguments for the PPAPI Flash; used for debugging options. 
--ppapi-flash-path  Use the PPAPI (Pepper) Flash found at the given path. 
--ppapi-flash-version  Report the given version for the PPAPI (Pepper) Flash. The version should be numbers separated by '.'s (e.g., "12.3.456.78"). If not specified, it defaults to "10.2.999.999". 
--ppapi-in-process  Runs PPAPI (Pepper) plugins in-process. 
--ppapi-plugin-launcher  Specifies a command that should be used to launch the ppapi plugin process. Useful for running the plugin process through purify or quantify. Ex: --ppapi-plugin-launcher="path\to\purify /Run=yes" 
--ppapi-startup-dialog  Causes the PPAPI sub process to display a dialog on launch. Be sure to use --no-sandbox as well or the sandbox won't allow the dialog to display. 
--ppapi-subpixel-rendering-setting[1]  The enum value of FontRenderParams::subpixel_rendering to be passed to Ppapi processes. 
--precache-config-settings-url  The URL that provides the PrecacheConfigurationSettings proto. 
--precache-manifest-url-prefix  Precache manifests will be served from URLs with this prefix. 
--prefetch  prefetch: NoState Prefetch experiment. 
--prefetch-search-results[6]  Triggers prerendering of search base page to prefetch results for the typed omnibox query. Only has an effect when prerender is enabled. 
--prerender  Controls speculative prerendering of pages, and content prefetching. Both are dispatched from <link rel=prefetch href=...> elements. 
--prerender-from-omnibox  Triggers prerendering of pages from suggestions in the omnibox. Only has an effect when Instant is either disabled or restricted to search, and when prerender is enabled. 
--previous-app  previous-app should be the app that was running when last-launched-app started. 
--primary  No description 
--primordial-pipe-token  Provides a child process with a token string they can use to establish a primordial message pipe to the parent. 
--privet-ipv6-only  Use IPv6 only for privet HTTP. 
--process-per-site  Enable the "Process Per Site" process model for all domains. This mode consolidates same-site pages so that they share a single process. More details here: - http://www.chromium.org/developers/design-documents/process-models - The class comment in site_instance.h, listing the supported process models. IMPORTANT: This isn't to be confused with --site-per-process (which is about isolation, not consolidation). You probably want the other one. 
--process-per-tab  Runs each set of script-connected tabs (i.e., a BrowsingInstance) in its own renderer process. We default to using a renderer process for each site instance (i.e., group of pages from the same registered domain with script connections to each other). 
--product-version  Outputs the product version information and quit. Used as an internal api to detect the installed version of Chrome on Linux. 
--profile-directory  Selects directory of profile to associate with the first browser launched. 
--profiler-timing  Configure whether chrome://profiler will contain timing information. This option is enabled by default. A value of "0" will disable profiler timing, while all other values will enable it. 
--profiling-at-start  Starts the sampling based profiler for the browser process at startup. This will only work if chrome has been built with the gyp variable profiling=1. The output will go to the value of kProfilingFile. 
--profiling-file  Specifies a location for profiling output. This will only work if chrome has been built with the gyp variable profiling=1 or gn arg enable_profiling=true. {pid} if present will be replaced by the pid of the process. {count} if present will be incremented each time a profile is generated for this process. The default is chrome-profile-{pid} for the browser and test-profile-{pid} for tests. 
--profiling-flush  Controls whether profile data is periodically flushed to a file. Normally the data gets written on exit but cases exist where chrome doesn't exit cleanly (especially when using single-process). A time in seconds can be specified. 
--progress-bar-animation[6]  Specifies Android phone page loading progress bar animation. 
--progress-bar-completion[6]  When blink should declare a load "done" for the purpose of the progress bar. 
--prompt-for-external-extensions[22]  Should we prompt the user before allowing external extensions to install? This flag is available on Chromium for testing purposes. 
--proxy-auto-detect  Forces proxy auto-detection. 
--proxy-bypass-list  Specifies a list of hosts for whom we bypass proxy settings and use direct connections. Ignored if --proxy-auto-detect or --no-proxy-server are also specified. This is a comma-separated list of bypass rules. See: "net/proxy/proxy_bypass_rules.h" for the format of these rules. 
--proxy-pac-url  Uses the pac script at the given URL 
--proxy-server  Uses a specified proxy server, overrides system settings. This switch only affects HTTP and HTTPS requests.
--purge-and-suspend-time  Specifies the time for tab purging and suspending. When the indicated time passes after a tab goes backgrounded, the backgrounded tab is purged and suspended to save memory usage. The default value is "0" and purging and suspending never happen. 
--quic-connection-options  Specifies a comma separated list of QUIC connection options to send to the server. 
--quic-host-whitelist  Specifies a comma separated list of hosts to whitelist QUIC for. 
--quic-max-packet-length  Specifies the maximum length for a QUIC packet. 
--quic-version  Specifies the version of QUIC to use. 
--rdp_desktop_session  No description 
--reader-mode-feedback  No description 
--reader-mode-heuristics  No description 
--rebaseline-pixel-tests[2]  Makes browser pixel tests overwrite the reference if it does not match. 
--reduce-security-for-testing  Enables more web features over insecure connections. Designed to be used for testing purposes only. 
--reduced-referrer-granularity  Reduce the default `referer` header's granularity. 
--register-font-files  Registers additional font files on Windows (for fonts outside the usual %WINDIR%\Fonts location). Multiple files can be used by separating them with a semicolon (;). 
--register-pepper-plugins  Register Pepper plugins (see pepper_plugin_list.cc for its format). 
--relauncher[4]  A process type (switches::kProcessType) that relaunches the browser. See chrome/browser/mac/relauncher.h. 
--remote-debugging-address  Use the given address instead of the default loopback for accepting remote debugging connections. Should be used together with --remote-debugging-port. Note that the remote debugging protocol does not perform any authentication, so exposing it too widely can be a security risk. 
--remote-debugging-port  Enables remote debug over HTTP on the specified port. 
--remote-debugging-socket-name[6]  Enables remote debug over HTTP on the specified socket name. 
--remote-debugging-targets  Porvides a list of addresses to discover DevTools remote debugging targets. The format is <host>:<port>,...,<host>:port. 
--renderer  Causes the process to run as renderer instead of as browser. 
--renderer-cmd-prefix  The contents of this flag are prepended to the renderer command line. Useful values might be "valgrind" or "xterm -e gdb --args". 
--renderer-process-limit  Overrides the default/calculated limit to the number of renderer processes. Very high values for this setting can lead to high memory/resource usage or instability. 
--renderer-startup-dialog  Causes the renderer process to display a dialog on launch. Passing this flag also adds kNoSandbox on Windows non-official builds, since that's needed to show a dialog. 
--renderer-wait-for-java-debugger[6]  Block ChildProcessMain thread of the renderer's ChildProcessService until a Java debugger is attached. 
--repl  Runs a read-eval-print loop that allows the user to evaluate Javascript expressions. 
--report-vp9-as-an-unsupported-mime-type Force to report VP9 as an unsupported MIME type. 
--require-audio-hardware-for-testing  When running tests on a system without the required hardware or libraries, this flag will cause the tests to fail. Otherwise, they silently succeed. 
--reset-app-list-install-state  If set, the app list will forget it has been installed on startup. Note this doesn't prevent the app list from running, it just makes Chrome think the app list hasn't been enabled (as in kEnableAppList) yet. 
--reset-variation-state  Forces a reset of the one-time-randomized FieldTrials on this client, also known as the Chrome Variations state. 
--restore-last-session  Indicates the last session should be restored on startup. This overrides the preferences value and is primarily intended for testing. The value of this switch is the number of tabs to wait until loaded before 'load completed' is sent to the ui_test. 
--root-layer-scrolls  Handles frame scrolls via the root RenderLayer instead of the FrameView. 
--rtl  No description 
--run-layout-test  Request the render trees of pages to be dumped as text once they have finished loading. 
--safebrowsing-disable-auto-update  If present, safebrowsing only performs update when SafeBrowsingProtocolManager::ForceScheduleNextUpdate() is explicitly called. This is used for testing only.
--safebrowsing-disable-download-protection TODO(lzheng): Remove this flag once the feature works fine (http://crbug.com/74848). Disables safebrowsing feature that checks download url and downloads content's hash to make sure the content are not malicious. 
--safebrowsing-disable-extension-blacklist  Disables safebrowsing feature that checks for blacklisted extensions. 
--safebrowsing-manual-download-blacklist  List of comma-separated sha256 hashes of executable files which the download-protection service should treat as "dangerous." For a file to show a warning, it also must be considered a dangerous filetype and not be whitelisted otherwise (by signature or URL) and must be on a supported OS. Hashes are in hex. This is used for manual testing when looking for ways to by-pass download protection. 
--SafeSites  No description 
--sandbox-ipc  Causes the process to run as a sandbox IPC subprocess. 
--save-page-as-mhtml  Disable saving pages as HTML-only, disable saving pages as HTML Complete (with a directory of sub-resources). Enable only saving pages as MHTML. See http://crbug.com/120416 for how to remove this switch. 
--saveas-menu-label  Switches 'Save as...' context and app menu labels to 'Download...'. 
--screen-config  Specifies the initial screen configuration, or state of all displays, for FakeDisplayDelegate, see class for format details. 
--screenshot  Save a screenshot of the loaded page. 
--scripts-require-action  Notify the user and require consent for extensions running scripts. Appending --scripts-require-action=1 has the same effect as --enable-scripts-require-action (see below). 
--scroll-end-effect  Enables or disables scroll end effect in response to vertical overscroll. Set the value to '1' to enable the feature, and set to '0' to disable. Defaults to disabled. 
--secondary  No description 
--secondary-display-layout  Specifies the layout mode and offsets for the secondary display for testing. The format is "<t|r|b|l>,<offset>" where t=TOP, r=RIGHT, b=BOTTOM and L=LEFT. For example, 'r,-100' means the secondary display is positioned on the right with -100 offset. (above than primary) 
--secondary-ui-md  Applies the material design mode passed via --top-chrome-md to elements throughout Chrome (not just top Chrome). 
--service  Causes the process to run as a service process. 
--service-overrides  Specifies a JSON file from which to read a set of service metadata overrides. This can be used with the standalone mojo_runner to override executable and package resolution behavior. 
--service-request-channel-token  The token to use to construct the message pipe for a service in a child process. 
--shill-stub  Overrides network stub behavior. By default, ethernet, wifi and vpn are enabled, and transitions occur instantaneously. Multiple options can be comma separated (no spaces). Note: all options are in the format 'foo=x'. Values are case sensitive and based on Shill names in service_constants.h. See FakeShillManagerClient::SetInitialNetworkState for implementation. Examples: 'clear=1' - Clears all default configurations 'wifi=on' - A wifi network is initially connected ('1' also works) 'wifi=off' - Wifi networks are all initially disconnected ('0' also works) 'wifi=disabled' - Wifi is initially disabled 'wifi=none' - Wifi is unavailable 'wifi=portal' - Wifi connection will be in Portal state 'cellular=1' - Cellular is initially connected 'cellular=LTE' - Cellular is initially connected, technology is LTE 'interactive=3' - Interactive mode, connect/scan/etc requests take 3 secs 
--show-app-list  If true the app list will be shown. 
--show-autofill-type-predictions  Annotates forms with Autofill field type predictions. 
--show-component-extension-options  Makes component extensions appear in chrome://settings/extensions. 
--show-composited-layer-borders  Renders a border around compositor layers to help debug and study layer compositing. 
--show-fps-counter  Draws a heads-up-display showing Frames Per Second as well as GPU memory usage. If you also use --enable-logging=stderr --vmodule="head*=1" then FPS will also be output to the console log. 
--show-icons[1]  See kHideIcons. 
--show-layer-animation-bounds  Renders a border that represents the bounding box for the layer's animation. 
--show-mac-overlay-borders[9]  Show borders around CALayers corresponding to overlays and partial damage. 
--show-non-secure-passwords-cc-ui  No description 
--show-paint-rects  Visibly render a border around paint rects in the web page to help debug and study painting behavior. 
--show-property-changed-rects  Show rects in the HUD around layers whose properties have changed. 
--show-saved-copy  Command line flag offering a "Show saved copy" option to the user if offline. The various modes are disabled, primary, or secondary. Primary/secondary refers to button placement (for experiment). 
--show-screenspace-rects  Show rects in the HUD around the screen-space transformed bounds of every layer. 
--show-surface-damage-rects  Show rects in the HUD around damage as it is recorded into each render surface. 
--show_summary[6]  Forces a summary to be displayed below the update menu item. 
--silent-debugger-extension-api  Does not show an infobar when an extension attaches to a page using chrome.debugger page. Required to attach to extension background pages. 
--silent-launch  Causes Chrome to launch without opening any windows by default. Useful if one wishes to use Chrome as an ash server. 
--simulate-critical-update  Simulates a critical update being available. 
--simulate-elevated-recovery  Simulates that elevation is needed to recover upgrade channel. 
--simulate-outdated  Simulates that current version is outdated. 
--simulate-outdated-no-au  Simulates that current version is outdated and auto-update is off. 
--simulate-upgrade  Simulates an update being available. 
--single-process  Load apps in a single processes. 
--site-per-process  Enforces a one-site-per-process security policy: * Each renderer process, for its whole lifetime, is dedicated to rendering pages for just one site. * Thus, pages from different sites are never in the same process. * A renderer process's access rights are restricted based on its site. * All cross-site navigations force process swaps. * <iframe>s are rendered out-of-process whenever the src= is cross-site. More details here: - http://www.chromium.org/developers/design-documents/site-isolation - http://www.chromium.org/developers/design-documents/process-models - The class comment in site_instance.h, listing the supported process models. IMPORTANT: this isn't to be confused with --process-per-site (which is about process consolidation, not isolation). You probably want this one. 
--skip-gpu-data-loading  Skip gpu info collection, blacklist loading, and blacklist auto-update scheduling at browser startup time. Therefore, all GPU features are available, and about:gpu page shows empty content. The switch is intended only for layout tests. TODO(gab): Get rid of this switch entirely. 
--skip-nostore-all  No description 
--skip-nostore-main  No description 
--skip-reencoding-on-skp-capture  Skips reencoding bitmaps as PNGs when the encoded data is unavailable during SKP capture. This allows for obtaining an accurate sample of the types of images on the web, rather than being weighted towards PNGs that we have encoded ourselves. 
--slow  Defines that Material Design visual feedback animations should be slow. 
--slow-connections-only  No description 
--slow-down-raster-scale-factor  Re-rasters everything multiple times to simulate a much slower machine. Give a scale factor to cause raster to take that many times longer to complete, such as --slow-down-raster-scale-factor=25. 
--sms-test-messages  Sends test messages on first call to RequestUpdate (stub only). 
--spdy-proxy-auth-fallback  The origin of the data reduction proxy fallback. 
--spdy-proxy-auth-origin  The origin of the data reduction proxy. 
--spdy-proxy-auth-value  A test key for data reduction proxy authentication. 
--speculative-resource-prefetching  Speculative resource prefetching. 
--spelling-service-feedback-interval-seconds[17]  Specifies the number of seconds between sending batches of feedback to spelling service. The default is 30 minutes. The minimum is 5 seconds. This switch is for temporary testing only. TODO(rouslan): Remove this flag when feedback testing is complete. Revisit by August 2013. 
--spelling-service-feedback-url[17]  Specifies the URL where spelling service feedback data will be sent instead of the default URL. This switch is for temporary testing only. TODO(rouslan): Remove this flag when feedback testing is complete. Revisit by August 2013. 
--ssl-key-log-file  Causes SSL key material to be logged to the specified file for debugging purposes. See https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format for the format. 
--ssl-version-max  Specifies the maximum SSL/TLS version ("tls1", "tls1.1", "tls1.2", or "tls1.3"). 
--ssl-version-min  Specifies the minimum SSL/TLS version ("tls1", "tls1.1", "tls1.2", or "tls1.3"). 
--stable-release-mode  This makes us disable some web-platform runtime features so that we test content_shell as if it was a stable release. It is only followed when kRunLayoutTest is set. For the features' level, see http://dev.chromium.org/blink/runtime-enabled-features. 
--start-fullscreen  Specifies if the browser should start in fullscreen mode, like if the user had pressed F11 right after startup.
--start-maximized  Starts the browser maximized, regardless of any previous settings. 
--start-stack-profiler  Starts the stack sampling profiler in the child process. 
--started  Value for kTestCrosGaiaIdMigration indicating that migration is started (i.e. all stored user keys will be converted to GaiaId) 
--stub-cros-settings  Indicates that a stub implementation of CrosSettings that stores settings in memory without signing should be used, treating current user as the owner. This also modifies OwnerSettingsServiceChromeOS::HandlesSetting such that no settings are handled by OwnerSettingsServiceChromeOS. This option is for testing the chromeos build of chrome on the desktop only. 
--supervised-user-safesites  Enables/disables SafeSites filtering for supervised users. Possible values are "enabled", "disabled", "blacklist-only", and "online-check-only". 
--supports-dual-gpus  Indicates whether the dual GPU switching is supported or not. 
--swiftshader  No description 
--swiftshader-path  No description 
--sync-allow-insecure-xmpp-connection  Allows insecure XMPP connections for sync (for testing). 
--sync-deferred-startup-timeout-seconds  Allows overriding the deferred init fallback timeout. 
--sync-disable-deferred-startup  Enables deferring sync backend initialization until user initiated changes occur. 
--sync-enable-get-update-avoidance  Enables feature to avoid unnecessary GetUpdate requests. 
--sync-notification-host-port  Overrides the default host:port used for notifications. 
--sync-short-initial-retry-override  This flag causes sync to retry very quickly (see polling_constants.h) the when it encounters an error, as the first step towards exponential backoff. 
--sync-url  Overrides the default server used for profile sync. 
--system-developer-mode  Indicates that the system is running in dev mode. The dev mode probing is done by session manager. 
--system-log-upload-frequency  Frequency in Milliseconds for system log uploads. Should only be used for testing purposes. 
--tab-management-experiment-type-disabled[6]  Specifies a particular tab management experiment to enable. 
--tab-management-experiment-type-elderberry[6]  No description 
--test-auto-update-ui  Enables testing for auto update UI. 
--test-child-process  When running certain tests that spawn child processes, this switch indicates to the test framework that the current process is a child process. 
--test-cros-gaia-id-migration  Controls CrOS GaiaId migration for tests ("" is default). 
--test-do-not-initialize-icu  When running certain tests that spawn child processes, this switch indicates to the test framework that the current process should not initialize ICU to avoid creating any scoped handles too early in startup. 
--test-gl-lib  Flag used for Linux tests: for desktop GL bindings, try to load this GL library first, but fall back to regular library if loading fails. 
--test-name  Passes the name of the current running automated test to Chrome. 
--test-type  Type of the current test harness ("browser" or "ui"). 
--testing-fixed-http-port  Allows for forcing socket connections to http/https to use fixed ports. 
--testing-fixed-https-port  No description 
--tls1  These values aren't switches, but rather the values that kSSLVersionMax and kSSLVersionMin can have. 
--tls1.1  No description 
--tls1.2  No description 
--tls1.3  No description 
--top-chrome-md  Enables top Chrome material design elements. 
--top-controls-hide-threshold  Percentage of the top controls need to be hidden before they will auto hide. 
--top-controls-show-threshold  Percentage of the top controls need to be shown before they will auto show. 
--top-document-isolation  Groups all out-of-process iframes to a different process from the process of the top document. This is a performance isolation mode. 
--touch-calibration[23]  The calibration factors given as "<left>,<right>,<top>,<bottom>". 
--touch-devices[24]  Tells chrome to interpret events from these devices as touch events. Only available with XInput 2 (i.e. X server 1.8 or above). The id's of the devices can be retrieved from 'xinput list'. 
--touch-events  Enable support for touch events. 
--touch-noise-filtering[23]  Tells Chrome to do additional touch noise filtering. Should only be used if the driver level filtering is insufficient. 
--touch-selection-strategy  Controls how text selection granularity changes when touch text selection handles are dragged. Should be "character" or "direction". If not specified, the platform default is used. 
--trace-config-file  Causes TRACE_EVENT flags to be recorded from startup. This flag will be ignored if --trace-startup or --trace-shutdown is provided. 
--trace-export-events-to-etw[1]  Enables the exporting of the tracing events to ETW. This is only supported on Windows Vista and later. 
--trace-shutdown  Causes TRACE_EVENT flags to be recorded beginning with shutdown. Optionally, can specify the specific trace categories to include (e.g. --trace-shutdown=base,net) otherwise, all events are recorded. --trace-shutdown-file can be used to control where the trace log gets stored to since there is otherwise no way to access the result. 
--trace-shutdown-file  If supplied, sets the file which shutdown tracing will be stored into, if omitted the default will be used "chrometrace.log" in the current directory. Has no effect unless --trace-shutdown is also supplied. Example: --trace-shutdown --trace-shutdown-file=/tmp/trace_event.log 
--trace-startup  No description 
--trace-startup-duration  Sets the time in seconds until startup tracing ends. If omitted a default of 5 seconds is used. Has no effect without --trace-startup, or if --startup-trace-file=none was supplied. 
--trace-startup-file  If supplied, sets the file which startup tracing will be stored into, if omitted the default will be used "chrometrace.log" in the current directory. Has no effect unless --trace-startup is also supplied. Example: --trace-startup --trace-startup-file=/tmp/trace_event.log As a special case, can be set to 'none' - this disables automatically saving the result to a file and the first manually recorded trace will then receive all events since startup. 
--trace-to-console  Sends a pretty-printed version of tracing info to the console. 
--trace-to-file  Sends trace events from these categories to a file. --trace-to-file on its own sends to default categories. 
--trace-to-file-name  Specifies the file name for --trace-to-file. If unspecified, it will go to a default file name. 
--trace-upload-url  Sets the target URL for uploading tracing data. 
--translate-ranker-model-url  Overrides the URL from which the translate ranker model is downloaded. 
--translate-script-url  Overrides the default server used for Google Translate. 
--translate-security-origin  Overrides security-origin with which Translate runs in an isolated world. 
--true  Value indicating whether flag from command line switch is true. 
--try-chrome-again  Experimental. Shows a dialog asking the user to try chrome. This flag is to be used only by the upgrade process. 
--try-supported-channel-layouts[1]  Instead of always using the hardware channel layout, check if a driver supports the source channel layout. Avoids outputting empty channels and permits drivers to enable stereo to multichannel expansion. Kept behind a flag since some drivers lie about supported layouts and hang when used. See http://crbug.com/259165 for more details. 
--type  No description 
--ui-disable-partial-swap  Disable partial swap which is needed for some OpenGL drivers / emulators. 
--ui-enable-layer-lists  No description 
--ui-enable-rgba-4444-textures  No description 
--ui-enable-zero-copy  No description 
--ui-prioritize-in-gpu-process  Prioritizes the UI's command stream in the GPU process 
--ui-show-fps-counter  No description 
--ui-show-layer-animation-bounds  No description 
--ui-show-layer-borders  No description 
--ui-show-paint-rects  No description 
--ui-show-property-changed-rects  No description 
--ui-show-screenspace-rects  No description 
--ui-show-surface-damage-rects  No description 
--uninstall[1]  Runs un-installation steps that were done by chrome first-run. 
--unlimited-storage  Overrides per-origin quota settings to unlimited storage for any apps/origins. This should be used only for testing purpose. 
--unsafe-pac-url  Pass the full https:// URL to PAC (Proxy Auto Config) scripts. As opposed to the default behavior which strips path and query components before passing to the PAC scripts. 
--unsafely-treat-insecure-origin-as-secure  Treat given (insecure) origins as secure origins. Multiple origins can be supplied. Has no effect unless --user-data-dir is also supplied. Example: --unsafely-treat-insecure-origin-as-secure=http://a.test,http://b.test --user-data-dir=/test/only/profile/dir 
--use-android-midi-api[6]  Use Android Midi API for WebMIDI 
--use-angle  Select which ANGLE backend to use. Options are: default: Attempts several ANGLE renderers until one successfully initializes, varying ES support by platform. d3d9: Legacy D3D9 renderer, ES2 only. d3d11: D3D11 renderer, ES2 and ES3. warp: D3D11 renderer using software rasterization, ES2 and ES3. gl: Desktop GL renderer, ES2 and ES3. gles: GLES renderer, ES2 and ES3. 
--use-cras[25]  Use CRAS, the ChromeOS audio server. 
--use-cross-process-frames-for-guests  Causes the implementations of guests (inner WebContents) to use out-of-process iframes. 
--use-fake-device-for-media-stream  Use fake device for Media Stream to replace actual camera and microphone. 
--use-fake-ui-for-media-stream  Bypass the media stream infobar by selecting the default device for media streams (e.g. WebRTC). Works with --use-fake-device-for-media-stream. 
--use-file-for-fake-audio-capture  Play a .wav file as the microphone. Note that for WebRTC calls we'll treat the bits as if they came from the microphone, which means you should disable audio processing (lest your audio file will play back distorted). The input file is converted to suit Chrome's audio buses if necessary, so most sane .wav files should work. You can pass either <path> to play the file looping or <path>%noloop to stop after playing the file to completion. 
--use-file-for-fake-video-capture  Use an .y4m file to play as the webcam. See the comments in media/capture/video/file_video_capture_device.h for more details. 
--use-first-display-as-internal  Uses the 1st display in --ash-host-window-bounds as internal display. This is for debugging on linux desktop. 
--use-gl  Select which implementation of GL the GPU process should use. Options are: desktop: whatever desktop OpenGL the user has installed (Linux and Mac default). egl: whatever EGL / GLES2 the user has installed (Windows default - actually ANGLE). osmesa: The OSMesa software renderer. 
--use-gpu-in-tests  Use hardware gpu, if available, for tests. 
--use-mobile-user-agent  Set when Chromium should use a mobile user agent. 
--use-mock-keychain[4]  No description 
--use-mus-in-renderer  Use the Mandoline UI Service in the Chrome render process. 
--use-new-virtual-keyboard-behavior  Use new window behavior for virtual keyboard (do not change work area in non-sticky mode). 
--use-passthrough-cmd-decoder  Use the Pass-through command decoder, skipping all validation and state tracking. 
--use-remote-compositing  Use remote compositor for the renderer. 
--use-simple-cache-backend  Uses experimental simple cache backend if possible. 
--use-test-config  Initializes X11 in threaded mode, and sets the |override_redirect| flag when creating X11 windows. Also, exposes the WindowServerTest interface to clients when launched with this flag. 
--user-agent  A string used to override the default user agent with a custom one. 
--user-data-dir  Directory where the browser stores the user profile. 
--use_new_features_summary[6]  Forces the new features summary to be displayed below the update menu item. 
--utility  Causes the process to run as a utility subprocess. 
--utility-allowed-dir  The utility process is sandboxed, with access to one directory. This flag specifies the directory that can be accessed. 
--utility-cmd-prefix  The contents of this flag are prepended to the utility process command line. Useful values might be "valgrind" or "xterm -e gdb --args". 
--utility-run-elevated  No description 
--v  Gives the default maximal active V-logging level; 0 is the default. Normally positive values are used for V-logging levels. 
--v8-cache-options  Set options to cache V8 data. (off, preparse data, or code) 
--v8-cache-strategies-for-cache-storage  Set strategies to cache V8 data in CacheStorage. (off, normal, or aggressive) 
--v8-natives-passed-by-fd  Signals that the V8 natives file has been transfered to the child process by a file descriptor. 
--v8-pac-mojo-in-process  Enables using an in-process Mojo service for the v8 proxy resolver. 
--v8-pac-mojo-out-of-process  Enables using an out-of-process Mojo service for the v8 proxy resolver. 
--v8-snapshot-passed-by-fd  Signals that the V8 startup snapshot file has been transfered to the child process by a file descriptor. 
--validate-crx  Examines a .crx for validity and prints the result. 
--validate-input-event-stream  In debug builds, asserts that the stream of input events is valid. 
--variations-server-url  Specifies a custom URL for the server which reports variation data to the client. Specifying this switch enables the Variations service on unofficial builds. See variations_service.cc. 
--version  No description 
--video-image-texture-target  Texture target for CHROMIUM_image backed video frame textures. 
--video-threads  Set number of threads to use for video decoding. 
--video-underflow-threshold-ms  Allows clients to override the threshold for when the media renderer will declare the underflow state for the video stream when audio is present. TODO(dalecurtis): Remove once experiments for http://crbug.com/470940 finish. 
--viewer-launch-via-appid[1]  Requests that Chrome launch the Metro viewer process via the given appid (which is assumed to be registered as default browser) and synchronously connect to it. 
--virtual-time-budget  If set the system waits the specified number of virtual milliseconds before deeming the page to be ready. For determinism virtual time does not advance while there are pending network fetches (i.e no timers will fire). Once all network fetches have completed, timers fire and if the system runs out of virtual time is fastforwarded so the next timer fires immediatley, until the specified virtual time budget is exhausted. 
--vmodule  Gives the per-module maximal V-logging levels to override the value given by --v. E.g. "my_module=2,foo*=3" would change the logging level for all code in source files "my_module.*" and "foo*.*" ("-inl" suffixes are also disregarded for this matching). Any pattern containing a forward or backward slash will be tested against the whole pathname and not just the module. E.g., "*/foo/bar/*=2" would change the logging level for all code in source files under a "foo/bar" directory. 
--vpx[10]  No description 
--wait-for-debugger  Will wait for 60 seconds for a debugger to come to attach to the process. 
--wait-for-debugger-children  Will add kWaitForDebugger to every child processes. If a value is passed, it will be used as a filter to determine if the child process should have the kWaitForDebugger flag passed on or not. 
--wake-on-wifi-packet  Enables wake on wifi packet feature, which wakes the device on the receipt of network packets from whitelisted sources. 
--wallet-service-use-sandbox  Use the sandbox Online Wallet service URL (for developer testing). 
--watcher[1]  Causes the process to run as a watcher process. 
--waveout-buffers[1]  Number of buffers to use for WaveOut. 
--webapk-server-url[6]  Custom WebAPK server URL for the sake of testing. 
--webrtc-stun-probe-trial[10]  Renderer process parameter for WebRTC Stun probe trial to determine the interval. Please see SetupStunProbeTrial in chrome_browser_field_trials_desktop.cc for more detail. 
--webview-sandboxed-renderer  No description 
--whitelisted-extension-id  Adds the given extension ID to all the permission whitelists. 
--win-jumplist-action  Specifies which category option was clicked in the Windows Jumplist that resulted in a browser startup. 
--window-position  Specify the initial window position: --window-position=x,y 
--window-size  Sets the initial window size. Provided as string in the format "800x600". 
--window-workspace  Specify the initial window workspace: --window-workspace=id 
--windows10-custom-titlebar[1]  Enables custom-drawing the titlebar and tabstrip background so that it's not a garish #FFFFFF like it is by default on Windows 10. 
--winhttp-proxy-resolver  Uses WinHTTP to fetch and evaluate PAC scripts. Otherwise the default is to use Chromium's network stack to fetch, and V8 to evaluate. 
--with-flash[2]  This value is used as an option for |kEnableDefaultMediaSession|. 
--wm-window-animations-disabled  If present animations are disabled. 
--zygote  Causes the process to run as a renderer zygote. 

How to use a command line switch?

The Chromium Team has made a page on which they briefly explain how to use these switches.

Conditions

These are rather technical. While most are pretty self-explanatory, keep in mind that any condition means that a switch isn't always available.

  1. The constant OS_WIN must be defined.
  2. The constant ENABLE_PLUGINS must be defined.
  3. The constants OS_FREEBSD, OS_LINUX and OS_SOLARIS must be defined.
  4. The constant OS_MACOSX must be defined.
  5. The constant OS_CHROMEOS must be defined.
  6. The constant OS_ANDROID must be defined.
  7. The constants OS_CHROMEOS and OS_MACOSX must not be defined, and the constant OS_POSIX must be defined.
  8. The constant OFFICIAL_BUILD must not be defined, and the constant ENABLE_PRINT_PREVIEW must be defined.
  9. The constant OS_IOS must not be defined, and the constant OS_MACOSX must be defined.
  10. The constant ENABLE_WEBRTC must be defined.
  11. The constant OS_CHROMEOS must not be defined.
  12. The constant NDEBUG must be defined.
  13. The constant OS_POSIX must be defined.
  14. The constant OS_ANDROID must not be defined, and the constant ENABLE_PLUGINS must be defined.
  15. The constant GOOGLE_CHROME_BUILD must be defined.
  16. The constant OS_CHROMEOS must not be defined, and the constant OS_LINUX must be defined.
  17. The constant ENABLE_SPELLCHECK must be defined.
  18. The constant ENABLE_WAYLAND_SERVER must be defined.
  19. The constant ENABLE_IPC_FUZZER must be defined.
  20. The constant GOOGLE_CHROME_BUILD must not be defined.
  21. The constant USE_ASH must be defined.
  22. The constant CHROMIUM_BUILD must be defined.
  23. The constants USE_OZONE and USE_X11 must be defined.
  24. The constant OS_LINUX must be defined.
  25. The constant USE_CRAS must be defined.

Based on top-of-tree Chromium code, updated daily and open sourceRSS Feed?
Append ?date=YYYY-MM-DD to the URL to get a snapshot of the supported switches at a certain date.

posted on 2016-10-20 17:17  帅胡  阅读(13345)  评论(0编辑  收藏  举报

导航