解决的问题
1、编译cmuclmtk
http://www.cnblogs.com/libtool: line 479: CDPATH: command not found
http://www.cnblogs.com/libtool: line 1308: func_opt_split: command not found
libtool: Version mismatch error. This is libtool 2.2.8, but the
libtool: definition of this LT_INIT comes from an older release.
libtool: You should recreate aclocal.m4 with macros from libtool 2.2.8
libtool: and run autoconf again.
make[3]: *** [arpa_bo_ng_prob.lo] error 1
make[3]: Leaving directory `/home/speech/sphinx/cmuclmtk/src/liblmest'
make[2]: *** [all-recursive] error 1
make[2]: Leaving directory `/home/speech/sphinx/cmuclmtk/src'
make[1]: *** [all-recursive] error 1
make[1]: Leaving directory `/home/speech/sphinx/cmuclmtk'
make: *** [all] error 2
解决办法:
1、rm －rf aclocal.m4；
autoreconf
2、将已安装的libtool覆盖到编译目录
./configure
cp /usr/bin/libtool /home/speech/sphinx/cmuclmtk
make
make install
3、cd /usr/local/bin
./sphinx3-simple
………
INFO: srch_time_switch_tree.c(350): Time for building trees, 0.0290 CPU 0.0446 Clk
INFO: srch_time_switch_tree.c(372): Lextrees(0), 1 nodes(filler)
INFO: srch_time_switch_tree.c(372): Lextrees(1), 1 nodes(filler)
INFO: srch_time_switch_tree.c(372): Lextrees(2), 1 nodes(filler)
INFO: vithist.c(168): Initializing Viterbi-history module
INFO: Initialization of srch_t, report:
INFO: Operation Mode = 4, Operation Name = fwdtree
INFO:
INFO: s3_decode.c(259): Input data will NOT be byte swapped
INFO: s3_decode.c(264): Partial hypothesis WILL be dumped
press ENTER to start recording
2、Soundrecorder不起作用
pocketsphinx_continuous -lm 2916.lm -dict 2916.dic
INFO: ngram_search_fwdtree.c(186): Creating search tree
INFO: ngram_search_fwdtree.c(191): before: 0 root, 0 non-root channels, 12 single-phone words
INFO: ngram_search_fwdtree.c(324): after: max nonroot chan increased to 142
INFO: ngram_search_fwdtree.c(333): after: 6 root, 14 non-root channels, 11 single-phone words
INFO: ngram_search_fwdflat.c(153): fwdflat: min_ef_width = 4, max_sf_win = 25
INFO: continuous.c(261): pocketsphinx_continuous COMPILED ON: Feb 18 2011, AT: 10:04:56
FATAL_ERROR: "continuous.c", line 135: cont_ad_calib failed
原因：Soundrecorder不起作用。
SPHINXBASE_EXPORT int32 cont_ad_calib (cont_ad_t *cont)
Calibrate the silence filter. 校准静音滤波器
Calibrate the silence filter.
Calibration to determine an initial silence threshold. This function can be called any number of times. It should be called at least once immediately after cont_ad_init. The silence threshold is also updated internally once in a while, so this function only needs to be called in the middle if there is a definite change in the recording environment. The application is responsible for making sure that the raw audio source is turned on before the calibration. Return value: 0 if successful, <0 otherwise.
Parameters: cont In: object pointer returned by cont_ad_init
Definition at line 1022 of file cont_ad_base.c.
References cont_ad_t::ad, cont_ad_t::adbuf, cont_ad_calib(), cont_ad_t::headfrm, cont_ad_t::n_calib_frame, cont_ad_t::n_frm, cont_ad_t::pow_hist, cont_ad_t::spf, and cont_ad_t::thresh_update.
Referenced by cont_ad_calib().
3、vmware+安装ubuntu10.10，soundrecorder使用正常
./pocketsphinxcontinuous
INFO: ngram_search_fwdtree.c(186): Creating search tree
INFO: ngram_search_fwdtree.c(191): before: 0 root, 0 non-root channels, 12 single-phone words
INFO: ngram_search_fwdtree.c(324): after: max nonroot chan increased to 142
INFO: ngram_search_fwdtree.c(333): after: 6 root, 14 non-root channels, 11 single-phone words
INFO: ngram_search_fwdflat.c(153): fwdflat: min_ef_width = 4, max_sf_win = 25
ad_oss.c(103): Failed to open audio device(/dev/dsp): No such file or directory
FATAL_ERROR: "continuous.c", line 259: ad_open_dev failed
解决办法：
Sudo apt-get install libasound2-dev
recompiled sphinxbase
…………..
4、my_db.transtription存在“/n”
ODULE: 00 verify training files
O.S. is case sensitive ("A" != "a").
Phones will be treated as case sensitive.
Phase 1: DICT - Checking to see if the dict and filler dict agrees with the phonelist file.
Found 16 words using 16 phones
Phase 2: DICT - Checking to make sure there are not duplicate entries in the dictionary
Phase 3: CTL - Check general format; utterance length (must be positive); files exist
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
WARNING: CTL line does not parse correctly:
Phase 4: CTL - Checking number of lines in the transcript should match lines in control file
Phase 5: CTL - Determine amount of training data, see if n_tied_states seems reasonable.
Total Hours Training: 0.000789957264957265
This is a small amount of data, no comment at this time
Phase 6: TRANSCRIPT - Checking that all the words in the transcript are in the dictionary
Words in dictionary: 13
Words in filler dictionary: 3
Phase 7: TRANSCRIPT - Checking that all the phones in the transcript are in the phonelist, and all phones in the phonelist appear at least once
Something failed: (/sphinx/MyTrain/scripts_pl/00.verify/verify_all.pl)
5、 error while loading shared libraries: xxx.so.0:cannot open shared object file: No such file or directory
出现此问题，那就表示系统不知道xxx.so 放在哪个目录下，这个时候就要在/etc/ld.so.conf中加入xxx.so所在的目录。
一般而言，你默认安装后，默认会生成在/usr/local/lib这个目录下，所以在/etc/ld.so.conf中加入/usr/local/lib这一行，可以解决此问题。
将/etc/ld.so.conf存档后，执行「/sbin/ldconfig –v」来更新一下才会生效。
浙公网安备 33010602011771号