A trouble with ICD-3 programmer。
MCU: PIC32MM
sw: MPLAB IPE
tool: ICD-3
1 product introduction
as show in the photo，In engineer designer。 To prevent the heat from the large current，we use a large area copper。 but is not fit for SMT line。
2 The test program based on labview
3 MPLAB IPE programming tool
4 help ！！
5 slove the problem for program failure。
a Open operation setting permissions
b Follow operation instruction
6 analysis the problem on ICD-3
set-- Erase before program。and Black Check before program again。
