华为交换机 quidway s2700 series 关闭STP

初始账号密码尝试
用户名和密码分别为admin和admin@huawei.com

[Switch]port-group stpdisablegroup
[Switch-port-group-stpdisablegroup]group-member Ethernet 0/0/1 to Ethernet 0/0/16
[Switch-port-group-stpdisablegroup]stp disable
[Switch-port-group-stpdisablegroup]display stp brief
 MSTID  Port                        Role  STP State     Protection
[Switch-port-group-stpdisablegroup]display stp
-------[CIST Global Info][Mode STP]-------
CIST Bridge         :32768.4857-0251-9886
Bridge Times        :Hello 2s MaxAge 20s FwDly 15s MaxHop 20
CIST Root/ERPC      :32768.4857-0251-9886 / 0
CIST RegRoot/IRPC   :32768.4857-0251-9886 / 0
CIST RootPortId     :0.0
BPDU-Protection     :Disabled
TC or TCN received  :0
TC count per hello  :0
STP Converge Mode   :Normal
Time since last TC  :0 days 1h:57m:36s
----[Port17(GigabitEthernet0/0/1)][DOWN]----
 Port Protocol       :Enabled
 Port Role           :Disabled Port
 Port Priority       :128
 Port Cost(Dot1T )   :Config=auto / Active=200000000
 Designated Bridge/Port   :32768.4857-0251-9886 / 128.17
 Port Edged          :Config=default / Active=disabled
 Point-to-point      :Config=auto / Active=false
 Transit Limit       :51 packets/hello-time
 Protection Type     :None
 Port STP Mode       :STP
 Port Protocol Type  :Config=auto / Active=dot1s
 PortTimes           :Hello 2s MaxAge 20s FwDly 15s RemHop 20
 TC or TCN send      :0
 TC or TCN received  :0
 BPDU Sent           :0
          TCN: 0, Config: 0, RST: 0, MST: 0
 BPDU Received       :0
          TCN: 0, Config: 0, RST: 0, MST: 0
----[Port18(GigabitEthernet0/0/2)][DOWN]----
 Port Protocol       :Enabled
 Port Role           :Disabled Port
 Port Priority       :128
 Port Cost(Dot1T )   :Config=auto / Active=200000000
 Designated Bridge/Port   :32768.4857-0251-9886 / 128.18
 Port Edged          :Config=default / Active=disabled
 Point-to-point      :Config=auto / Active=false
 Transit Limit       :51 packets/hello-time
 Protection Type     :None
 Port STP Mode       :STP
 Port Protocol Type  :Config=auto / Active=dot1s
 PortTimes           :Hello 2s MaxAge 20s FwDly 15s RemHop 20
 TC or TCN send      :0
 TC or TCN received  :0
 BPDU Sent           :0
          TCN: 0, Config: 0, RST: 0, MST: 0
 BPDU Received       :0
          TCN: 0, Config: 0, RST: 0, MST: 0
[Switch]quit
<Switch>save
The current configuration will be written to the device.
Are you sure to continue?[Y/N]Y
Info: Please input the file name(*.cfg,*.zip)[vrpcfg.zip]:
Jan  1 2008 02:00:31-05:13 Switch %%01CFM/4/SAVE(l)[0]:The user chose Y when deciding whether to save the configuration to the device.
Warning: AutoConfig will stop in the next phase for the manual intervention.
Now saving the current configuration to the slot 0 .
Info: Save the configuration successfully.