Implement a wireless attack by using aircrack-ng and crunch

Step 1：Set our network wireless card into monitor mode

Step 2: Use these commands below, and make sure they will not disturb u.

Step 3: spying the network

The Arguments:

- BSSID: the MAC address of the device, which is a wireless access  point
- PWR: the strength of the signal, so the smaller this minus is, let's say minus 31 is better than minus 53.

Step 4: Perform a specific scan

-C is Channel
-w is write

Here is a result, we have a scan in progress and another device that is hooked up. You will not be able to perform this method if you do not have any stations that are connected to a certain access point or are associated with it. This is because you have nothing to unauthenticated, there is nothing conducting the authentication process which you can capture.

Step 5: launch a denial-of-service attack to capture an

authentication

Step 6: Brute the password

Any Help would be significant! For example: U saw someone typing, u got the length of the password, the approximate location of passwords, and so on.

'man crunch'

In Addition, if u wanna alleviate the stress on a single machine, and in order to increase your time, you could split the work from password number and split the password list.

Final